BRICK STUDIO / MODEL 001
Golden Gate Bridge
Step-by-step assembly
244 steps · 2,107 supplied pieces · 13 part/color types
Model-derived assembly draft. Brick positions are checked digitally; physical strength, chain end joins and tower mounting still need a test build. Extra connectors may be needed and are not included in the 2,107-piece list.
Before you begin
Use a rigid board at least 103 × 14 cm. Sort the parts by type and color. Temporarily support the deck between piers during assembly. Temporary supports are outside the model inventory.
Coordinate key: x increases left to right from 0 to 128 studs. z increases from the near edge (0) to the far edge (16). y is the height of the piece’s bottom in plate units above the base. One stud = 8 mm; one plate = 3.2 mm. Footprint = x width × z depth. Studs face upward. Part IDs match the site’s placement export.
Prototype chain end joins and tower mounting before cutting any strings. The flexible assembly steps describe the proposed fit and include a physical test gate. No extra connector stock is included.
Chapters
01 Supports / STEP 1 OF 244
Support 1 · layer 0
- Build support 1 on a rigid, level board at x = 0–8. Keep the four supports at their shown spacing; the bridge is 128 studs long.
- Place these 8 pieces with their bottoms 0 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
8 × Plate 2 × 8
Bright red · element 303421
Bright red · element 303421
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1 | Plate 2 × 8 | 0 | 0 | 0 | 2 × 8 | — |
| #2 | Plate 2 × 8 | 0 | 8 | 0 | 2 × 8 | — |
| #3 | Plate 2 × 8 | 2 | 0 | 0 | 2 × 8 | — |
| #4 | Plate 2 × 8 | 2 | 8 | 0 | 2 × 8 | — |
| #5 | Plate 2 × 8 | 4 | 0 | 0 | 2 × 8 | — |
| #6 | Plate 2 × 8 | 4 | 8 | 0 | 2 × 8 | — |
| #7 | Plate 2 × 8 | 6 | 0 | 0 | 2 × 8 | — |
| #8 | Plate 2 × 8 | 6 | 8 | 0 | 2 × 8 | — |
01 Supports / STEP 2 OF 244
Support 1 · layer 1
- Build support 1 on a rigid, level board at x = 0–8. Keep the four supports at their shown spacing; the bridge is 128 studs long.
- Place these 8 pieces with their bottoms 1 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
8 × Plate 2 × 8
Bright red · element 303421
Bright red · element 303421
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #9 | Plate 2 × 8 | 0 | 0 | 1 | 8 × 2 | — |
| #10 | Plate 2 × 8 | 0 | 2 | 1 | 8 × 2 | — |
| #11 | Plate 2 × 8 | 0 | 4 | 1 | 8 × 2 | — |
| #12 | Plate 2 × 8 | 0 | 6 | 1 | 8 × 2 | — |
| #13 | Plate 2 × 8 | 0 | 8 | 1 | 8 × 2 | — |
| #14 | Plate 2 × 8 | 0 | 10 | 1 | 8 × 2 | — |
| #15 | Plate 2 × 8 | 0 | 12 | 1 | 8 × 2 | — |
| #16 | Plate 2 × 8 | 0 | 14 | 1 | 8 × 2 | — |
01 Supports / STEP 3 OF 244
Support 1 · layer 2
- Build support 1 on a rigid, level board at x = 0–8. Keep the four supports at their shown spacing; the bridge is 128 studs long.
- Place these 8 pieces with their bottoms 2 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
8 × Plate 2 × 8
Bright red · element 303421
Bright red · element 303421
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #17 | Plate 2 × 8 | 0 | 0 | 2 | 2 × 8 | — |
| #18 | Plate 2 × 8 | 0 | 8 | 2 | 2 × 8 | — |
| #19 | Plate 2 × 8 | 2 | 0 | 2 | 2 × 8 | — |
| #20 | Plate 2 × 8 | 2 | 8 | 2 | 2 × 8 | — |
| #21 | Plate 2 × 8 | 4 | 0 | 2 | 2 × 8 | — |
| #22 | Plate 2 × 8 | 4 | 8 | 2 | 2 × 8 | — |
| #23 | Plate 2 × 8 | 6 | 0 | 2 | 2 × 8 | — |
| #24 | Plate 2 × 8 | 6 | 8 | 2 | 2 × 8 | — |
01 Supports / STEP 4 OF 244
Support 1 · layer 3
- Build support 1 on a rigid, level board at x = 0–8. Keep the four supports at their shown spacing; the bridge is 128 studs long.
- Place these 4 pieces with their bottoms 3 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #25 | Brick 2 × 2 | 3 | 0 | 3 | 2 × 2 | — |
| #26 | Brick 2 × 2 | 3 | 2 | 3 | 2 × 2 | — |
| #27 | Brick 2 × 2 | 3 | 12 | 3 | 2 × 2 | — |
| #28 | Brick 2 × 2 | 3 | 14 | 3 | 2 × 2 | — |
01 Supports / STEP 5 OF 244
Support 1 · layer 6
- Build support 1 on a rigid, level board at x = 0–8. Keep the four supports at their shown spacing; the bridge is 128 studs long.
- Place these 4 pieces with their bottoms 6 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #29 | Brick 2 × 2 | 3 | 0 | 6 | 2 × 2 | — |
| #30 | Brick 2 × 2 | 3 | 2 | 6 | 2 × 2 | — |
| #31 | Brick 2 × 2 | 3 | 12 | 6 | 2 × 2 | — |
| #32 | Brick 2 × 2 | 3 | 14 | 6 | 2 × 2 | — |
01 Supports / STEP 6 OF 244
Support 1 · layer 9
- Build support 1 on a rigid, level board at x = 0–8. Keep the four supports at their shown spacing; the bridge is 128 studs long.
- Place these 4 pieces with their bottoms 9 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #33 | Brick 2 × 2 | 3 | 0 | 9 | 2 × 2 | — |
| #34 | Brick 2 × 2 | 3 | 2 | 9 | 2 × 2 | — |
| #35 | Brick 2 × 2 | 3 | 12 | 9 | 2 × 2 | — |
| #36 | Brick 2 × 2 | 3 | 14 | 9 | 2 × 2 | — |
01 Supports / STEP 7 OF 244
Support 1 · layer 12
- Build support 1 on a rigid, level board at x = 0–8. Keep the four supports at their shown spacing; the bridge is 128 studs long.
- Place these 2 pieces with their bottoms 12 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
2 × Plate 2 × 4
Bright red · element 302021
Bright red · element 302021
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #37 | Plate 2 × 4 | 3 | 0 | 12 | 2 × 4 | — |
| #40 | Plate 2 × 4 | 3 | 12 | 12 | 2 × 4 | — |
01 Supports / STEP 8 OF 244
Support 1 · layer 13
- Build support 1 on a rigid, level board at x = 0–8. Keep the four supports at their shown spacing; the bridge is 128 studs long.
- Place these 2 pieces with their bottoms 13 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
2 × Plate 2 × 4
Bright red · element 302021
Bright red · element 302021
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #38 | Plate 2 × 4 | 3 | 0 | 13 | 2 × 4 | — |
| #41 | Plate 2 × 4 | 3 | 12 | 13 | 2 × 4 | — |
01 Supports / STEP 9 OF 244
Support 1 · layer 14
- Build support 1 on a rigid, level board at x = 0–8. Keep the four supports at their shown spacing; the bridge is 128 studs long.
- Place these 2 pieces with their bottoms 14 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
2 × Plate 2 × 4
Bright red · element 302021
Bright red · element 302021
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #39 | Plate 2 × 4 | 3 | 0 | 14 | 2 × 4 | — |
| #42 | Plate 2 × 4 | 3 | 12 | 14 | 2 × 4 | — |
01 Supports / STEP 10 OF 244
Support 1 · layer 15
- Build support 1 on a rigid, level board at x = 0–8. Keep the four supports at their shown spacing; the bridge is 128 studs long.
- Place these 4 pieces with their bottoms 15 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #43 | Brick 2 × 2 | 3 | 0 | 15 | 2 × 2 | — |
| #44 | Brick 2 × 2 | 3 | 2 | 15 | 2 × 2 | — |
| #45 | Brick 2 × 2 | 3 | 12 | 15 | 2 × 2 | — |
| #46 | Brick 2 × 2 | 3 | 14 | 15 | 2 × 2 | — |
01 Supports / STEP 11 OF 244
Support 1 · layer 18
- Build support 1 on a rigid, level board at x = 0–8. Keep the four supports at their shown spacing; the bridge is 128 studs long.
- Place these 4 pieces with their bottoms 18 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #47 | Brick 2 × 2 | 3 | 0 | 18 | 2 × 2 | — |
| #48 | Brick 2 × 2 | 3 | 2 | 18 | 2 × 2 | — |
| #49 | Brick 2 × 2 | 3 | 12 | 18 | 2 × 2 | — |
| #50 | Brick 2 × 2 | 3 | 14 | 18 | 2 × 2 | — |
01 Supports / STEP 12 OF 244
Support 1 · layer 21
- Build support 1 on a rigid, level board at x = 0–8. Keep the four supports at their shown spacing; the bridge is 128 studs long.
- Place these 4 pieces with their bottoms 21 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #51 | Brick 2 × 2 | 3 | 0 | 21 | 2 × 2 | — |
| #52 | Brick 2 × 2 | 3 | 2 | 21 | 2 × 2 | — |
| #53 | Brick 2 × 2 | 3 | 12 | 21 | 2 × 2 | — |
| #54 | Brick 2 × 2 | 3 | 14 | 21 | 2 × 2 | — |
01 Supports / STEP 13 OF 244
Support 1 · layer 24
- Build support 1 on a rigid, level board at x = 0–8. Keep the four supports at their shown spacing; the bridge is 128 studs long.
- Place these 2 pieces with their bottoms 24 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
2 × Plate 2 × 4
Bright red · element 302021
Bright red · element 302021
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #55 | Plate 2 × 4 | 3 | 0 | 24 | 2 × 4 | — |
| #58 | Plate 2 × 4 | 3 | 12 | 24 | 2 × 4 | — |
01 Supports / STEP 14 OF 244
Support 1 · layer 25
- Build support 1 on a rigid, level board at x = 0–8. Keep the four supports at their shown spacing; the bridge is 128 studs long.
- Place these 2 pieces with their bottoms 25 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
2 × Plate 2 × 4
Bright red · element 302021
Bright red · element 302021
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #56 | Plate 2 × 4 | 3 | 0 | 25 | 2 × 4 | — |
| #59 | Plate 2 × 4 | 3 | 12 | 25 | 2 × 4 | — |
01 Supports / STEP 15 OF 244
Support 1 · layer 26
- Build support 1 on a rigid, level board at x = 0–8. Keep the four supports at their shown spacing; the bridge is 128 studs long.
- Place these 2 pieces with their bottoms 26 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
2 × Plate 2 × 4
Bright red · element 302021
Bright red · element 302021
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #57 | Plate 2 × 4 | 3 | 0 | 26 | 2 × 4 | — |
| #60 | Plate 2 × 4 | 3 | 12 | 26 | 2 × 4 | — |
01 Supports / STEP 16 OF 244
Support 1 · layer 27
- Build support 1 on a rigid, level board at x = 0–8. Keep the four supports at their shown spacing; the bridge is 128 studs long.
- Place these 4 pieces with their bottoms 27 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #61 | Brick 2 × 2 | 3 | 0 | 27 | 2 × 2 | — |
| #62 | Brick 2 × 2 | 3 | 2 | 27 | 2 × 2 | — |
| #63 | Brick 2 × 2 | 3 | 12 | 27 | 2 × 2 | — |
| #64 | Brick 2 × 2 | 3 | 14 | 27 | 2 × 2 | — |
01 Supports / STEP 17 OF 244
Support 1 · layer 30
- Build support 1 on a rigid, level board at x = 0–8. Keep the four supports at their shown spacing; the bridge is 128 studs long.
- Place these 4 pieces with their bottoms 30 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #65 | Brick 2 × 2 | 3 | 0 | 30 | 2 × 2 | — |
| #66 | Brick 2 × 2 | 3 | 2 | 30 | 2 × 2 | — |
| #67 | Brick 2 × 2 | 3 | 12 | 30 | 2 × 2 | — |
| #68 | Brick 2 × 2 | 3 | 14 | 30 | 2 × 2 | — |
01 Supports / STEP 18 OF 244
Support 1 · layer 33
- Build support 1 on a rigid, level board at x = 0–8. Keep the four supports at their shown spacing; the bridge is 128 studs long.
- Place these 4 pieces with their bottoms 33 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Plate 2 × 4
Bright red · element 302021
Bright red · element 302021
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #69 | Plate 2 × 4 | 2 | 0 | 33 | 4 × 2 | — |
| #70 | Plate 2 × 4 | 2 | 2 | 33 | 4 × 2 | — |
| #71 | Plate 2 × 4 | 2 | 12 | 33 | 4 × 2 | — |
| #72 | Plate 2 × 4 | 2 | 14 | 33 | 4 × 2 | — |
01 Supports / STEP 19 OF 244
Support 2 · layer 0
- Build support 2 on a rigid, level board at x = 28–36. Keep the four supports at their shown spacing; the bridge is 128 studs long.
- Place these 8 pieces with their bottoms 0 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
8 × Plate 2 × 8
Bright red · element 303421
Bright red · element 303421
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #73 | Plate 2 × 8 | 28 | 0 | 0 | 2 × 8 | — |
| #74 | Plate 2 × 8 | 28 | 8 | 0 | 2 × 8 | — |
| #75 | Plate 2 × 8 | 30 | 0 | 0 | 2 × 8 | — |
| #76 | Plate 2 × 8 | 30 | 8 | 0 | 2 × 8 | — |
| #77 | Plate 2 × 8 | 32 | 0 | 0 | 2 × 8 | — |
| #78 | Plate 2 × 8 | 32 | 8 | 0 | 2 × 8 | — |
| #79 | Plate 2 × 8 | 34 | 0 | 0 | 2 × 8 | — |
| #80 | Plate 2 × 8 | 34 | 8 | 0 | 2 × 8 | — |
01 Supports / STEP 20 OF 244
Support 2 · layer 1
- Build support 2 on a rigid, level board at x = 28–36. Keep the four supports at their shown spacing; the bridge is 128 studs long.
- Place these 8 pieces with their bottoms 1 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
8 × Plate 2 × 8
Bright red · element 303421
Bright red · element 303421
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #81 | Plate 2 × 8 | 28 | 0 | 1 | 8 × 2 | — |
| #82 | Plate 2 × 8 | 28 | 2 | 1 | 8 × 2 | — |
| #83 | Plate 2 × 8 | 28 | 4 | 1 | 8 × 2 | — |
| #84 | Plate 2 × 8 | 28 | 6 | 1 | 8 × 2 | — |
| #85 | Plate 2 × 8 | 28 | 8 | 1 | 8 × 2 | — |
| #86 | Plate 2 × 8 | 28 | 10 | 1 | 8 × 2 | — |
| #87 | Plate 2 × 8 | 28 | 12 | 1 | 8 × 2 | — |
| #88 | Plate 2 × 8 | 28 | 14 | 1 | 8 × 2 | — |
01 Supports / STEP 21 OF 244
Support 2 · layer 2
- Build support 2 on a rigid, level board at x = 28–36. Keep the four supports at their shown spacing; the bridge is 128 studs long.
- Place these 8 pieces with their bottoms 2 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
8 × Plate 2 × 8
Bright red · element 303421
Bright red · element 303421
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #89 | Plate 2 × 8 | 28 | 0 | 2 | 2 × 8 | — |
| #90 | Plate 2 × 8 | 28 | 8 | 2 | 2 × 8 | — |
| #91 | Plate 2 × 8 | 30 | 0 | 2 | 2 × 8 | — |
| #92 | Plate 2 × 8 | 30 | 8 | 2 | 2 × 8 | — |
| #93 | Plate 2 × 8 | 32 | 0 | 2 | 2 × 8 | — |
| #94 | Plate 2 × 8 | 32 | 8 | 2 | 2 × 8 | — |
| #95 | Plate 2 × 8 | 34 | 0 | 2 | 2 × 8 | — |
| #96 | Plate 2 × 8 | 34 | 8 | 2 | 2 × 8 | — |
01 Supports / STEP 22 OF 244
Support 2 · layer 3
- Build support 2 on a rigid, level board at x = 28–36. Keep the four supports at their shown spacing; the bridge is 128 studs long.
- Place these 4 pieces with their bottoms 3 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #97 | Brick 2 × 2 | 31 | 0 | 3 | 2 × 2 | — |
| #98 | Brick 2 × 2 | 31 | 2 | 3 | 2 × 2 | — |
| #99 | Brick 2 × 2 | 31 | 12 | 3 | 2 × 2 | — |
| #100 | Brick 2 × 2 | 31 | 14 | 3 | 2 × 2 | — |
01 Supports / STEP 23 OF 244
Support 2 · layer 6
- Build support 2 on a rigid, level board at x = 28–36. Keep the four supports at their shown spacing; the bridge is 128 studs long.
- Place these 4 pieces with their bottoms 6 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #101 | Brick 2 × 2 | 31 | 0 | 6 | 2 × 2 | — |
| #102 | Brick 2 × 2 | 31 | 2 | 6 | 2 × 2 | — |
| #103 | Brick 2 × 2 | 31 | 12 | 6 | 2 × 2 | — |
| #104 | Brick 2 × 2 | 31 | 14 | 6 | 2 × 2 | — |
01 Supports / STEP 24 OF 244
Support 2 · layer 9
- Build support 2 on a rigid, level board at x = 28–36. Keep the four supports at their shown spacing; the bridge is 128 studs long.
- Place these 4 pieces with their bottoms 9 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #105 | Brick 2 × 2 | 31 | 0 | 9 | 2 × 2 | — |
| #106 | Brick 2 × 2 | 31 | 2 | 9 | 2 × 2 | — |
| #107 | Brick 2 × 2 | 31 | 12 | 9 | 2 × 2 | — |
| #108 | Brick 2 × 2 | 31 | 14 | 9 | 2 × 2 | — |
01 Supports / STEP 25 OF 244
Support 2 · layer 12
- Build support 2 on a rigid, level board at x = 28–36. Keep the four supports at their shown spacing; the bridge is 128 studs long.
- Place these 2 pieces with their bottoms 12 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
2 × Plate 2 × 4
Bright red · element 302021
Bright red · element 302021
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #109 | Plate 2 × 4 | 31 | 0 | 12 | 2 × 4 | — |
| #112 | Plate 2 × 4 | 31 | 12 | 12 | 2 × 4 | — |
01 Supports / STEP 26 OF 244
Support 2 · layer 13
- Build support 2 on a rigid, level board at x = 28–36. Keep the four supports at their shown spacing; the bridge is 128 studs long.
- Place these 2 pieces with their bottoms 13 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
2 × Plate 2 × 4
Bright red · element 302021
Bright red · element 302021
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #110 | Plate 2 × 4 | 31 | 0 | 13 | 2 × 4 | — |
| #113 | Plate 2 × 4 | 31 | 12 | 13 | 2 × 4 | — |
01 Supports / STEP 27 OF 244
Support 2 · layer 14
- Build support 2 on a rigid, level board at x = 28–36. Keep the four supports at their shown spacing; the bridge is 128 studs long.
- Place these 2 pieces with their bottoms 14 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
2 × Plate 2 × 4
Bright red · element 302021
Bright red · element 302021
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #111 | Plate 2 × 4 | 31 | 0 | 14 | 2 × 4 | — |
| #114 | Plate 2 × 4 | 31 | 12 | 14 | 2 × 4 | — |
01 Supports / STEP 28 OF 244
Support 2 · layer 15
- Build support 2 on a rigid, level board at x = 28–36. Keep the four supports at their shown spacing; the bridge is 128 studs long.
- Place these 4 pieces with their bottoms 15 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #115 | Brick 2 × 2 | 31 | 0 | 15 | 2 × 2 | — |
| #116 | Brick 2 × 2 | 31 | 2 | 15 | 2 × 2 | — |
| #117 | Brick 2 × 2 | 31 | 12 | 15 | 2 × 2 | — |
| #118 | Brick 2 × 2 | 31 | 14 | 15 | 2 × 2 | — |
01 Supports / STEP 29 OF 244
Support 2 · layer 18
- Build support 2 on a rigid, level board at x = 28–36. Keep the four supports at their shown spacing; the bridge is 128 studs long.
- Place these 4 pieces with their bottoms 18 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #119 | Brick 2 × 2 | 31 | 0 | 18 | 2 × 2 | — |
| #120 | Brick 2 × 2 | 31 | 2 | 18 | 2 × 2 | — |
| #121 | Brick 2 × 2 | 31 | 12 | 18 | 2 × 2 | — |
| #122 | Brick 2 × 2 | 31 | 14 | 18 | 2 × 2 | — |
01 Supports / STEP 30 OF 244
Support 2 · layer 21
- Build support 2 on a rigid, level board at x = 28–36. Keep the four supports at their shown spacing; the bridge is 128 studs long.
- Place these 4 pieces with their bottoms 21 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #123 | Brick 2 × 2 | 31 | 0 | 21 | 2 × 2 | — |
| #124 | Brick 2 × 2 | 31 | 2 | 21 | 2 × 2 | — |
| #125 | Brick 2 × 2 | 31 | 12 | 21 | 2 × 2 | — |
| #126 | Brick 2 × 2 | 31 | 14 | 21 | 2 × 2 | — |
01 Supports / STEP 31 OF 244
Support 2 · layer 24
- Build support 2 on a rigid, level board at x = 28–36. Keep the four supports at their shown spacing; the bridge is 128 studs long.
- Place these 2 pieces with their bottoms 24 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
2 × Plate 2 × 4
Bright red · element 302021
Bright red · element 302021
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #127 | Plate 2 × 4 | 31 | 0 | 24 | 2 × 4 | — |
| #130 | Plate 2 × 4 | 31 | 12 | 24 | 2 × 4 | — |
01 Supports / STEP 32 OF 244
Support 2 · layer 25
- Build support 2 on a rigid, level board at x = 28–36. Keep the four supports at their shown spacing; the bridge is 128 studs long.
- Place these 2 pieces with their bottoms 25 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
2 × Plate 2 × 4
Bright red · element 302021
Bright red · element 302021
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #128 | Plate 2 × 4 | 31 | 0 | 25 | 2 × 4 | — |
| #131 | Plate 2 × 4 | 31 | 12 | 25 | 2 × 4 | — |
01 Supports / STEP 33 OF 244
Support 2 · layer 26
- Build support 2 on a rigid, level board at x = 28–36. Keep the four supports at their shown spacing; the bridge is 128 studs long.
- Place these 2 pieces with their bottoms 26 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
2 × Plate 2 × 4
Bright red · element 302021
Bright red · element 302021
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #129 | Plate 2 × 4 | 31 | 0 | 26 | 2 × 4 | — |
| #132 | Plate 2 × 4 | 31 | 12 | 26 | 2 × 4 | — |
01 Supports / STEP 34 OF 244
Support 2 · layer 27
- Build support 2 on a rigid, level board at x = 28–36. Keep the four supports at their shown spacing; the bridge is 128 studs long.
- Place these 4 pieces with their bottoms 27 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #133 | Brick 2 × 2 | 31 | 0 | 27 | 2 × 2 | — |
| #134 | Brick 2 × 2 | 31 | 2 | 27 | 2 × 2 | — |
| #135 | Brick 2 × 2 | 31 | 12 | 27 | 2 × 2 | — |
| #136 | Brick 2 × 2 | 31 | 14 | 27 | 2 × 2 | — |
01 Supports / STEP 35 OF 244
Support 2 · layer 30
- Build support 2 on a rigid, level board at x = 28–36. Keep the four supports at their shown spacing; the bridge is 128 studs long.
- Place these 4 pieces with their bottoms 30 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #137 | Brick 2 × 2 | 31 | 0 | 30 | 2 × 2 | — |
| #138 | Brick 2 × 2 | 31 | 2 | 30 | 2 × 2 | — |
| #139 | Brick 2 × 2 | 31 | 12 | 30 | 2 × 2 | — |
| #140 | Brick 2 × 2 | 31 | 14 | 30 | 2 × 2 | — |
01 Supports / STEP 36 OF 244
Support 2 · layer 33
- Build support 2 on a rigid, level board at x = 28–36. Keep the four supports at their shown spacing; the bridge is 128 studs long.
- Place these 4 pieces with their bottoms 33 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Plate 2 × 4
Bright red · element 302021
Bright red · element 302021
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #141 | Plate 2 × 4 | 30 | 0 | 33 | 4 × 2 | — |
| #142 | Plate 2 × 4 | 30 | 2 | 33 | 4 × 2 | — |
| #143 | Plate 2 × 4 | 30 | 12 | 33 | 4 × 2 | — |
| #144 | Plate 2 × 4 | 30 | 14 | 33 | 4 × 2 | — |
01 Supports / STEP 37 OF 244
Support 3 · layer 0
- Build support 3 on a rigid, level board at x = 92–100. Keep the four supports at their shown spacing; the bridge is 128 studs long.
- Place these 8 pieces with their bottoms 0 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
8 × Plate 2 × 8
Bright red · element 303421
Bright red · element 303421
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #145 | Plate 2 × 8 | 92 | 0 | 0 | 2 × 8 | — |
| #146 | Plate 2 × 8 | 92 | 8 | 0 | 2 × 8 | — |
| #147 | Plate 2 × 8 | 94 | 0 | 0 | 2 × 8 | — |
| #148 | Plate 2 × 8 | 94 | 8 | 0 | 2 × 8 | — |
| #149 | Plate 2 × 8 | 96 | 0 | 0 | 2 × 8 | — |
| #150 | Plate 2 × 8 | 96 | 8 | 0 | 2 × 8 | — |
| #151 | Plate 2 × 8 | 98 | 0 | 0 | 2 × 8 | — |
| #152 | Plate 2 × 8 | 98 | 8 | 0 | 2 × 8 | — |
01 Supports / STEP 38 OF 244
Support 3 · layer 1
- Build support 3 on a rigid, level board at x = 92–100. Keep the four supports at their shown spacing; the bridge is 128 studs long.
- Place these 8 pieces with their bottoms 1 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
8 × Plate 2 × 8
Bright red · element 303421
Bright red · element 303421
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #153 | Plate 2 × 8 | 92 | 0 | 1 | 8 × 2 | — |
| #154 | Plate 2 × 8 | 92 | 2 | 1 | 8 × 2 | — |
| #155 | Plate 2 × 8 | 92 | 4 | 1 | 8 × 2 | — |
| #156 | Plate 2 × 8 | 92 | 6 | 1 | 8 × 2 | — |
| #157 | Plate 2 × 8 | 92 | 8 | 1 | 8 × 2 | — |
| #158 | Plate 2 × 8 | 92 | 10 | 1 | 8 × 2 | — |
| #159 | Plate 2 × 8 | 92 | 12 | 1 | 8 × 2 | — |
| #160 | Plate 2 × 8 | 92 | 14 | 1 | 8 × 2 | — |
01 Supports / STEP 39 OF 244
Support 3 · layer 2
- Build support 3 on a rigid, level board at x = 92–100. Keep the four supports at their shown spacing; the bridge is 128 studs long.
- Place these 8 pieces with their bottoms 2 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
8 × Plate 2 × 8
Bright red · element 303421
Bright red · element 303421
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #161 | Plate 2 × 8 | 92 | 0 | 2 | 2 × 8 | — |
| #162 | Plate 2 × 8 | 92 | 8 | 2 | 2 × 8 | — |
| #163 | Plate 2 × 8 | 94 | 0 | 2 | 2 × 8 | — |
| #164 | Plate 2 × 8 | 94 | 8 | 2 | 2 × 8 | — |
| #165 | Plate 2 × 8 | 96 | 0 | 2 | 2 × 8 | — |
| #166 | Plate 2 × 8 | 96 | 8 | 2 | 2 × 8 | — |
| #167 | Plate 2 × 8 | 98 | 0 | 2 | 2 × 8 | — |
| #168 | Plate 2 × 8 | 98 | 8 | 2 | 2 × 8 | — |
01 Supports / STEP 40 OF 244
Support 3 · layer 3
- Build support 3 on a rigid, level board at x = 92–100. Keep the four supports at their shown spacing; the bridge is 128 studs long.
- Place these 4 pieces with their bottoms 3 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #169 | Brick 2 × 2 | 95 | 0 | 3 | 2 × 2 | — |
| #170 | Brick 2 × 2 | 95 | 2 | 3 | 2 × 2 | — |
| #171 | Brick 2 × 2 | 95 | 12 | 3 | 2 × 2 | — |
| #172 | Brick 2 × 2 | 95 | 14 | 3 | 2 × 2 | — |
01 Supports / STEP 41 OF 244
Support 3 · layer 6
- Build support 3 on a rigid, level board at x = 92–100. Keep the four supports at their shown spacing; the bridge is 128 studs long.
- Place these 4 pieces with their bottoms 6 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #173 | Brick 2 × 2 | 95 | 0 | 6 | 2 × 2 | — |
| #174 | Brick 2 × 2 | 95 | 2 | 6 | 2 × 2 | — |
| #175 | Brick 2 × 2 | 95 | 12 | 6 | 2 × 2 | — |
| #176 | Brick 2 × 2 | 95 | 14 | 6 | 2 × 2 | — |
01 Supports / STEP 42 OF 244
Support 3 · layer 9
- Build support 3 on a rigid, level board at x = 92–100. Keep the four supports at their shown spacing; the bridge is 128 studs long.
- Place these 4 pieces with their bottoms 9 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #177 | Brick 2 × 2 | 95 | 0 | 9 | 2 × 2 | — |
| #178 | Brick 2 × 2 | 95 | 2 | 9 | 2 × 2 | — |
| #179 | Brick 2 × 2 | 95 | 12 | 9 | 2 × 2 | — |
| #180 | Brick 2 × 2 | 95 | 14 | 9 | 2 × 2 | — |
01 Supports / STEP 43 OF 244
Support 3 · layer 12
- Build support 3 on a rigid, level board at x = 92–100. Keep the four supports at their shown spacing; the bridge is 128 studs long.
- Place these 2 pieces with their bottoms 12 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
2 × Plate 2 × 4
Bright red · element 302021
Bright red · element 302021
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #181 | Plate 2 × 4 | 95 | 0 | 12 | 2 × 4 | — |
| #184 | Plate 2 × 4 | 95 | 12 | 12 | 2 × 4 | — |
01 Supports / STEP 44 OF 244
Support 3 · layer 13
- Build support 3 on a rigid, level board at x = 92–100. Keep the four supports at their shown spacing; the bridge is 128 studs long.
- Place these 2 pieces with their bottoms 13 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
2 × Plate 2 × 4
Bright red · element 302021
Bright red · element 302021
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #182 | Plate 2 × 4 | 95 | 0 | 13 | 2 × 4 | — |
| #185 | Plate 2 × 4 | 95 | 12 | 13 | 2 × 4 | — |
01 Supports / STEP 45 OF 244
Support 3 · layer 14
- Build support 3 on a rigid, level board at x = 92–100. Keep the four supports at their shown spacing; the bridge is 128 studs long.
- Place these 2 pieces with their bottoms 14 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
2 × Plate 2 × 4
Bright red · element 302021
Bright red · element 302021
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #183 | Plate 2 × 4 | 95 | 0 | 14 | 2 × 4 | — |
| #186 | Plate 2 × 4 | 95 | 12 | 14 | 2 × 4 | — |
01 Supports / STEP 46 OF 244
Support 3 · layer 15
- Build support 3 on a rigid, level board at x = 92–100. Keep the four supports at their shown spacing; the bridge is 128 studs long.
- Place these 4 pieces with their bottoms 15 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #187 | Brick 2 × 2 | 95 | 0 | 15 | 2 × 2 | — |
| #188 | Brick 2 × 2 | 95 | 2 | 15 | 2 × 2 | — |
| #189 | Brick 2 × 2 | 95 | 12 | 15 | 2 × 2 | — |
| #190 | Brick 2 × 2 | 95 | 14 | 15 | 2 × 2 | — |
01 Supports / STEP 47 OF 244
Support 3 · layer 18
- Build support 3 on a rigid, level board at x = 92–100. Keep the four supports at their shown spacing; the bridge is 128 studs long.
- Place these 4 pieces with their bottoms 18 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #191 | Brick 2 × 2 | 95 | 0 | 18 | 2 × 2 | — |
| #192 | Brick 2 × 2 | 95 | 2 | 18 | 2 × 2 | — |
| #193 | Brick 2 × 2 | 95 | 12 | 18 | 2 × 2 | — |
| #194 | Brick 2 × 2 | 95 | 14 | 18 | 2 × 2 | — |
01 Supports / STEP 48 OF 244
Support 3 · layer 21
- Build support 3 on a rigid, level board at x = 92–100. Keep the four supports at their shown spacing; the bridge is 128 studs long.
- Place these 4 pieces with their bottoms 21 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #195 | Brick 2 × 2 | 95 | 0 | 21 | 2 × 2 | — |
| #196 | Brick 2 × 2 | 95 | 2 | 21 | 2 × 2 | — |
| #197 | Brick 2 × 2 | 95 | 12 | 21 | 2 × 2 | — |
| #198 | Brick 2 × 2 | 95 | 14 | 21 | 2 × 2 | — |
01 Supports / STEP 49 OF 244
Support 3 · layer 24
- Build support 3 on a rigid, level board at x = 92–100. Keep the four supports at their shown spacing; the bridge is 128 studs long.
- Place these 2 pieces with their bottoms 24 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
2 × Plate 2 × 4
Bright red · element 302021
Bright red · element 302021
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #199 | Plate 2 × 4 | 95 | 0 | 24 | 2 × 4 | — |
| #202 | Plate 2 × 4 | 95 | 12 | 24 | 2 × 4 | — |
01 Supports / STEP 50 OF 244
Support 3 · layer 25
- Build support 3 on a rigid, level board at x = 92–100. Keep the four supports at their shown spacing; the bridge is 128 studs long.
- Place these 2 pieces with their bottoms 25 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
2 × Plate 2 × 4
Bright red · element 302021
Bright red · element 302021
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #200 | Plate 2 × 4 | 95 | 0 | 25 | 2 × 4 | — |
| #203 | Plate 2 × 4 | 95 | 12 | 25 | 2 × 4 | — |
01 Supports / STEP 51 OF 244
Support 3 · layer 26
- Build support 3 on a rigid, level board at x = 92–100. Keep the four supports at their shown spacing; the bridge is 128 studs long.
- Place these 2 pieces with their bottoms 26 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
2 × Plate 2 × 4
Bright red · element 302021
Bright red · element 302021
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #201 | Plate 2 × 4 | 95 | 0 | 26 | 2 × 4 | — |
| #204 | Plate 2 × 4 | 95 | 12 | 26 | 2 × 4 | — |
01 Supports / STEP 52 OF 244
Support 3 · layer 27
- Build support 3 on a rigid, level board at x = 92–100. Keep the four supports at their shown spacing; the bridge is 128 studs long.
- Place these 4 pieces with their bottoms 27 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #205 | Brick 2 × 2 | 95 | 0 | 27 | 2 × 2 | — |
| #206 | Brick 2 × 2 | 95 | 2 | 27 | 2 × 2 | — |
| #207 | Brick 2 × 2 | 95 | 12 | 27 | 2 × 2 | — |
| #208 | Brick 2 × 2 | 95 | 14 | 27 | 2 × 2 | — |
01 Supports / STEP 53 OF 244
Support 3 · layer 30
- Build support 3 on a rigid, level board at x = 92–100. Keep the four supports at their shown spacing; the bridge is 128 studs long.
- Place these 4 pieces with their bottoms 30 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #209 | Brick 2 × 2 | 95 | 0 | 30 | 2 × 2 | — |
| #210 | Brick 2 × 2 | 95 | 2 | 30 | 2 × 2 | — |
| #211 | Brick 2 × 2 | 95 | 12 | 30 | 2 × 2 | — |
| #212 | Brick 2 × 2 | 95 | 14 | 30 | 2 × 2 | — |
01 Supports / STEP 54 OF 244
Support 3 · layer 33
- Build support 3 on a rigid, level board at x = 92–100. Keep the four supports at their shown spacing; the bridge is 128 studs long.
- Place these 4 pieces with their bottoms 33 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Plate 2 × 4
Bright red · element 302021
Bright red · element 302021
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #213 | Plate 2 × 4 | 94 | 0 | 33 | 4 × 2 | — |
| #214 | Plate 2 × 4 | 94 | 2 | 33 | 4 × 2 | — |
| #215 | Plate 2 × 4 | 94 | 12 | 33 | 4 × 2 | — |
| #216 | Plate 2 × 4 | 94 | 14 | 33 | 4 × 2 | — |
01 Supports / STEP 55 OF 244
Support 4 · layer 0
- Build support 4 on a rigid, level board at x = 120–128. Keep the four supports at their shown spacing; the bridge is 128 studs long.
- Place these 8 pieces with their bottoms 0 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
8 × Plate 2 × 8
Bright red · element 303421
Bright red · element 303421
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #217 | Plate 2 × 8 | 120 | 0 | 0 | 2 × 8 | — |
| #218 | Plate 2 × 8 | 120 | 8 | 0 | 2 × 8 | — |
| #219 | Plate 2 × 8 | 122 | 0 | 0 | 2 × 8 | — |
| #220 | Plate 2 × 8 | 122 | 8 | 0 | 2 × 8 | — |
| #221 | Plate 2 × 8 | 124 | 0 | 0 | 2 × 8 | — |
| #222 | Plate 2 × 8 | 124 | 8 | 0 | 2 × 8 | — |
| #223 | Plate 2 × 8 | 126 | 0 | 0 | 2 × 8 | — |
| #224 | Plate 2 × 8 | 126 | 8 | 0 | 2 × 8 | — |
01 Supports / STEP 56 OF 244
Support 4 · layer 1
- Build support 4 on a rigid, level board at x = 120–128. Keep the four supports at their shown spacing; the bridge is 128 studs long.
- Place these 8 pieces with their bottoms 1 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
8 × Plate 2 × 8
Bright red · element 303421
Bright red · element 303421
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #225 | Plate 2 × 8 | 120 | 0 | 1 | 8 × 2 | — |
| #226 | Plate 2 × 8 | 120 | 2 | 1 | 8 × 2 | — |
| #227 | Plate 2 × 8 | 120 | 4 | 1 | 8 × 2 | — |
| #228 | Plate 2 × 8 | 120 | 6 | 1 | 8 × 2 | — |
| #229 | Plate 2 × 8 | 120 | 8 | 1 | 8 × 2 | — |
| #230 | Plate 2 × 8 | 120 | 10 | 1 | 8 × 2 | — |
| #231 | Plate 2 × 8 | 120 | 12 | 1 | 8 × 2 | — |
| #232 | Plate 2 × 8 | 120 | 14 | 1 | 8 × 2 | — |
01 Supports / STEP 57 OF 244
Support 4 · layer 2
- Build support 4 on a rigid, level board at x = 120–128. Keep the four supports at their shown spacing; the bridge is 128 studs long.
- Place these 8 pieces with their bottoms 2 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
8 × Plate 2 × 8
Bright red · element 303421
Bright red · element 303421
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #233 | Plate 2 × 8 | 120 | 0 | 2 | 2 × 8 | — |
| #234 | Plate 2 × 8 | 120 | 8 | 2 | 2 × 8 | — |
| #235 | Plate 2 × 8 | 122 | 0 | 2 | 2 × 8 | — |
| #236 | Plate 2 × 8 | 122 | 8 | 2 | 2 × 8 | — |
| #237 | Plate 2 × 8 | 124 | 0 | 2 | 2 × 8 | — |
| #238 | Plate 2 × 8 | 124 | 8 | 2 | 2 × 8 | — |
| #239 | Plate 2 × 8 | 126 | 0 | 2 | 2 × 8 | — |
| #240 | Plate 2 × 8 | 126 | 8 | 2 | 2 × 8 | — |
01 Supports / STEP 58 OF 244
Support 4 · layer 3
- Build support 4 on a rigid, level board at x = 120–128. Keep the four supports at their shown spacing; the bridge is 128 studs long.
- Place these 4 pieces with their bottoms 3 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #241 | Brick 2 × 2 | 123 | 0 | 3 | 2 × 2 | — |
| #242 | Brick 2 × 2 | 123 | 2 | 3 | 2 × 2 | — |
| #243 | Brick 2 × 2 | 123 | 12 | 3 | 2 × 2 | — |
| #244 | Brick 2 × 2 | 123 | 14 | 3 | 2 × 2 | — |
01 Supports / STEP 59 OF 244
Support 4 · layer 6
- Build support 4 on a rigid, level board at x = 120–128. Keep the four supports at their shown spacing; the bridge is 128 studs long.
- Place these 4 pieces with their bottoms 6 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #245 | Brick 2 × 2 | 123 | 0 | 6 | 2 × 2 | — |
| #246 | Brick 2 × 2 | 123 | 2 | 6 | 2 × 2 | — |
| #247 | Brick 2 × 2 | 123 | 12 | 6 | 2 × 2 | — |
| #248 | Brick 2 × 2 | 123 | 14 | 6 | 2 × 2 | — |
01 Supports / STEP 60 OF 244
Support 4 · layer 9
- Build support 4 on a rigid, level board at x = 120–128. Keep the four supports at their shown spacing; the bridge is 128 studs long.
- Place these 4 pieces with their bottoms 9 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #249 | Brick 2 × 2 | 123 | 0 | 9 | 2 × 2 | — |
| #250 | Brick 2 × 2 | 123 | 2 | 9 | 2 × 2 | — |
| #251 | Brick 2 × 2 | 123 | 12 | 9 | 2 × 2 | — |
| #252 | Brick 2 × 2 | 123 | 14 | 9 | 2 × 2 | — |
01 Supports / STEP 61 OF 244
Support 4 · layer 12
- Build support 4 on a rigid, level board at x = 120–128. Keep the four supports at their shown spacing; the bridge is 128 studs long.
- Place these 2 pieces with their bottoms 12 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
2 × Plate 2 × 4
Bright red · element 302021
Bright red · element 302021
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #253 | Plate 2 × 4 | 123 | 0 | 12 | 2 × 4 | — |
| #256 | Plate 2 × 4 | 123 | 12 | 12 | 2 × 4 | — |
01 Supports / STEP 62 OF 244
Support 4 · layer 13
- Build support 4 on a rigid, level board at x = 120–128. Keep the four supports at their shown spacing; the bridge is 128 studs long.
- Place these 2 pieces with their bottoms 13 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
2 × Plate 2 × 4
Bright red · element 302021
Bright red · element 302021
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #254 | Plate 2 × 4 | 123 | 0 | 13 | 2 × 4 | — |
| #257 | Plate 2 × 4 | 123 | 12 | 13 | 2 × 4 | — |
01 Supports / STEP 63 OF 244
Support 4 · layer 14
- Build support 4 on a rigid, level board at x = 120–128. Keep the four supports at their shown spacing; the bridge is 128 studs long.
- Place these 2 pieces with their bottoms 14 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
2 × Plate 2 × 4
Bright red · element 302021
Bright red · element 302021
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #255 | Plate 2 × 4 | 123 | 0 | 14 | 2 × 4 | — |
| #258 | Plate 2 × 4 | 123 | 12 | 14 | 2 × 4 | — |
01 Supports / STEP 64 OF 244
Support 4 · layer 15
- Build support 4 on a rigid, level board at x = 120–128. Keep the four supports at their shown spacing; the bridge is 128 studs long.
- Place these 4 pieces with their bottoms 15 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #259 | Brick 2 × 2 | 123 | 0 | 15 | 2 × 2 | — |
| #260 | Brick 2 × 2 | 123 | 2 | 15 | 2 × 2 | — |
| #261 | Brick 2 × 2 | 123 | 12 | 15 | 2 × 2 | — |
| #262 | Brick 2 × 2 | 123 | 14 | 15 | 2 × 2 | — |
01 Supports / STEP 65 OF 244
Support 4 · layer 18
- Build support 4 on a rigid, level board at x = 120–128. Keep the four supports at their shown spacing; the bridge is 128 studs long.
- Place these 4 pieces with their bottoms 18 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #263 | Brick 2 × 2 | 123 | 0 | 18 | 2 × 2 | — |
| #264 | Brick 2 × 2 | 123 | 2 | 18 | 2 × 2 | — |
| #265 | Brick 2 × 2 | 123 | 12 | 18 | 2 × 2 | — |
| #266 | Brick 2 × 2 | 123 | 14 | 18 | 2 × 2 | — |
01 Supports / STEP 66 OF 244
Support 4 · layer 21
- Build support 4 on a rigid, level board at x = 120–128. Keep the four supports at their shown spacing; the bridge is 128 studs long.
- Place these 4 pieces with their bottoms 21 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #267 | Brick 2 × 2 | 123 | 0 | 21 | 2 × 2 | — |
| #268 | Brick 2 × 2 | 123 | 2 | 21 | 2 × 2 | — |
| #269 | Brick 2 × 2 | 123 | 12 | 21 | 2 × 2 | — |
| #270 | Brick 2 × 2 | 123 | 14 | 21 | 2 × 2 | — |
01 Supports / STEP 67 OF 244
Support 4 · layer 24
- Build support 4 on a rigid, level board at x = 120–128. Keep the four supports at their shown spacing; the bridge is 128 studs long.
- Place these 2 pieces with their bottoms 24 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
2 × Plate 2 × 4
Bright red · element 302021
Bright red · element 302021
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #271 | Plate 2 × 4 | 123 | 0 | 24 | 2 × 4 | — |
| #274 | Plate 2 × 4 | 123 | 12 | 24 | 2 × 4 | — |
01 Supports / STEP 68 OF 244
Support 4 · layer 25
- Build support 4 on a rigid, level board at x = 120–128. Keep the four supports at their shown spacing; the bridge is 128 studs long.
- Place these 2 pieces with their bottoms 25 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
2 × Plate 2 × 4
Bright red · element 302021
Bright red · element 302021
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #272 | Plate 2 × 4 | 123 | 0 | 25 | 2 × 4 | — |
| #275 | Plate 2 × 4 | 123 | 12 | 25 | 2 × 4 | — |
01 Supports / STEP 69 OF 244
Support 4 · layer 26
- Build support 4 on a rigid, level board at x = 120–128. Keep the four supports at their shown spacing; the bridge is 128 studs long.
- Place these 2 pieces with their bottoms 26 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
2 × Plate 2 × 4
Bright red · element 302021
Bright red · element 302021
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #273 | Plate 2 × 4 | 123 | 0 | 26 | 2 × 4 | — |
| #276 | Plate 2 × 4 | 123 | 12 | 26 | 2 × 4 | — |
01 Supports / STEP 70 OF 244
Support 4 · layer 27
- Build support 4 on a rigid, level board at x = 120–128. Keep the four supports at their shown spacing; the bridge is 128 studs long.
- Place these 4 pieces with their bottoms 27 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #277 | Brick 2 × 2 | 123 | 0 | 27 | 2 × 2 | — |
| #278 | Brick 2 × 2 | 123 | 2 | 27 | 2 × 2 | — |
| #279 | Brick 2 × 2 | 123 | 12 | 27 | 2 × 2 | — |
| #280 | Brick 2 × 2 | 123 | 14 | 27 | 2 × 2 | — |
01 Supports / STEP 71 OF 244
Support 4 · layer 30
- Build support 4 on a rigid, level board at x = 120–128. Keep the four supports at their shown spacing; the bridge is 128 studs long.
- Place these 4 pieces with their bottoms 30 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #281 | Brick 2 × 2 | 123 | 0 | 30 | 2 × 2 | — |
| #282 | Brick 2 × 2 | 123 | 2 | 30 | 2 × 2 | — |
| #283 | Brick 2 × 2 | 123 | 12 | 30 | 2 × 2 | — |
| #284 | Brick 2 × 2 | 123 | 14 | 30 | 2 × 2 | — |
01 Supports / STEP 72 OF 244
Support 4 · layer 33
- Build support 4 on a rigid, level board at x = 120–128. Keep the four supports at their shown spacing; the bridge is 128 studs long.
- Place these 4 pieces with their bottoms 33 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Plate 2 × 4
Bright red · element 302021
Bright red · element 302021
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #285 | Plate 2 × 4 | 122 | 0 | 33 | 4 × 2 | — |
| #286 | Plate 2 × 4 | 122 | 2 | 33 | 4 × 2 | — |
| #287 | Plate 2 × 4 | 122 | 12 | 33 | 4 × 2 | — |
| #288 | Plate 2 × 4 | 122 | 14 | 33 | 4 × 2 | — |
02 Deck / STEP 73 OF 244
Deck structure · layer 34 · 1/2
- Work along the bridge from left to right. Temporarily support the long deck between piers while pressing pieces together. Keep the offset seams shown in the diagram.
- Place these 24 pieces with their bottoms 34 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
24 × Brick 1 × 8
Bright red · element 300821
Bright red · element 300821
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #289 | Brick 1 × 8 | 0 | 0 | 34 | 8 × 1 | — |
| #290 | Brick 1 × 8 | 8 | 0 | 34 | 8 × 1 | — |
| #291 | Brick 1 × 8 | 16 | 0 | 34 | 8 × 1 | — |
| #292 | Brick 1 × 8 | 24 | 0 | 34 | 8 × 1 | — |
| #293 | Brick 1 × 8 | 32 | 0 | 34 | 8 × 1 | — |
| #294 | Brick 1 × 8 | 40 | 0 | 34 | 8 × 1 | — |
| #295 | Brick 1 × 8 | 48 | 0 | 34 | 8 × 1 | — |
| #296 | Brick 1 × 8 | 56 | 0 | 34 | 8 × 1 | — |
| #297 | Brick 1 × 8 | 64 | 0 | 34 | 8 × 1 | — |
| #298 | Brick 1 × 8 | 72 | 0 | 34 | 8 × 1 | — |
| #299 | Brick 1 × 8 | 80 | 0 | 34 | 8 × 1 | — |
| #300 | Brick 1 × 8 | 88 | 0 | 34 | 8 × 1 | — |
| #353 | Brick 1 × 8 | 0 | 15 | 34 | 8 × 1 | — |
| #354 | Brick 1 × 8 | 8 | 15 | 34 | 8 × 1 | — |
| #355 | Brick 1 × 8 | 16 | 15 | 34 | 8 × 1 | — |
| #356 | Brick 1 × 8 | 24 | 15 | 34 | 8 × 1 | — |
| #357 | Brick 1 × 8 | 32 | 15 | 34 | 8 × 1 | — |
| #358 | Brick 1 × 8 | 40 | 15 | 34 | 8 × 1 | — |
| #359 | Brick 1 × 8 | 48 | 15 | 34 | 8 × 1 | — |
| #360 | Brick 1 × 8 | 56 | 15 | 34 | 8 × 1 | — |
| #361 | Brick 1 × 8 | 64 | 15 | 34 | 8 × 1 | — |
| #362 | Brick 1 × 8 | 72 | 15 | 34 | 8 × 1 | — |
| #363 | Brick 1 × 8 | 80 | 15 | 34 | 8 × 1 | — |
| #364 | Brick 1 × 8 | 88 | 15 | 34 | 8 × 1 | — |
02 Deck / STEP 74 OF 244
Deck structure · layer 34 · 2/2
- Work along the bridge from left to right. Temporarily support the long deck between piers while pressing pieces together. Keep the offset seams shown in the diagram.
- Place these 8 pieces with their bottoms 34 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
8 × Brick 1 × 8
Bright red · element 300821
Bright red · element 300821
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #301 | Brick 1 × 8 | 96 | 0 | 34 | 8 × 1 | — |
| #302 | Brick 1 × 8 | 104 | 0 | 34 | 8 × 1 | — |
| #303 | Brick 1 × 8 | 112 | 0 | 34 | 8 × 1 | — |
| #304 | Brick 1 × 8 | 120 | 0 | 34 | 8 × 1 | — |
| #365 | Brick 1 × 8 | 96 | 15 | 34 | 8 × 1 | — |
| #366 | Brick 1 × 8 | 104 | 15 | 34 | 8 × 1 | — |
| #367 | Brick 1 × 8 | 112 | 15 | 34 | 8 × 1 | — |
| #368 | Brick 1 × 8 | 120 | 15 | 34 | 8 × 1 | — |
02 Deck / STEP 75 OF 244
Deck structure · layer 37 · 1/3
- Work along the bridge from left to right. Temporarily support the long deck between piers while pressing pieces together. Keep the offset seams shown in the diagram.
- Place these 24 pieces with their bottoms 37 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
24 × Brick 1 × 8
Bright red · element 300821
Bright red · element 300821
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #305 | Brick 1 × 8 | 0 | 0 | 37 | 8 × 1 | — |
| #306 | Brick 1 × 8 | 8 | 0 | 37 | 8 × 1 | — |
| #307 | Brick 1 × 8 | 16 | 0 | 37 | 8 × 1 | — |
| #308 | Brick 1 × 8 | 24 | 0 | 37 | 8 × 1 | — |
| #309 | Brick 1 × 8 | 32 | 0 | 37 | 8 × 1 | — |
| #310 | Brick 1 × 8 | 40 | 0 | 37 | 8 × 1 | — |
| #321 | Brick 1 × 8 | 0 | 5 | 37 | 8 × 1 | — |
| #322 | Brick 1 × 8 | 8 | 5 | 37 | 8 × 1 | — |
| #323 | Brick 1 × 8 | 16 | 5 | 37 | 8 × 1 | — |
| #324 | Brick 1 × 8 | 24 | 5 | 37 | 8 × 1 | — |
| #325 | Brick 1 × 8 | 32 | 5 | 37 | 8 × 1 | — |
| #326 | Brick 1 × 8 | 40 | 5 | 37 | 8 × 1 | — |
| #337 | Brick 1 × 8 | 0 | 10 | 37 | 8 × 1 | — |
| #338 | Brick 1 × 8 | 8 | 10 | 37 | 8 × 1 | — |
| #339 | Brick 1 × 8 | 16 | 10 | 37 | 8 × 1 | — |
| #340 | Brick 1 × 8 | 24 | 10 | 37 | 8 × 1 | — |
| #341 | Brick 1 × 8 | 32 | 10 | 37 | 8 × 1 | — |
| #342 | Brick 1 × 8 | 40 | 10 | 37 | 8 × 1 | — |
| #369 | Brick 1 × 8 | 0 | 15 | 37 | 8 × 1 | — |
| #370 | Brick 1 × 8 | 8 | 15 | 37 | 8 × 1 | — |
| #371 | Brick 1 × 8 | 16 | 15 | 37 | 8 × 1 | — |
| #372 | Brick 1 × 8 | 24 | 15 | 37 | 8 × 1 | — |
| #373 | Brick 1 × 8 | 32 | 15 | 37 | 8 × 1 | — |
| #374 | Brick 1 × 8 | 40 | 15 | 37 | 8 × 1 | — |
02 Deck / STEP 76 OF 244
Deck structure · layer 37 · 2/3
- Work along the bridge from left to right. Temporarily support the long deck between piers while pressing pieces together. Keep the offset seams shown in the diagram.
- Place these 24 pieces with their bottoms 37 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
24 × Brick 1 × 8
Bright red · element 300821
Bright red · element 300821
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #311 | Brick 1 × 8 | 48 | 0 | 37 | 8 × 1 | — |
| #312 | Brick 1 × 8 | 56 | 0 | 37 | 8 × 1 | — |
| #313 | Brick 1 × 8 | 64 | 0 | 37 | 8 × 1 | — |
| #314 | Brick 1 × 8 | 72 | 0 | 37 | 8 × 1 | — |
| #315 | Brick 1 × 8 | 80 | 0 | 37 | 8 × 1 | — |
| #316 | Brick 1 × 8 | 88 | 0 | 37 | 8 × 1 | — |
| #327 | Brick 1 × 8 | 48 | 5 | 37 | 8 × 1 | — |
| #328 | Brick 1 × 8 | 56 | 5 | 37 | 8 × 1 | — |
| #329 | Brick 1 × 8 | 64 | 5 | 37 | 8 × 1 | — |
| #330 | Brick 1 × 8 | 72 | 5 | 37 | 8 × 1 | — |
| #331 | Brick 1 × 8 | 80 | 5 | 37 | 8 × 1 | — |
| #332 | Brick 1 × 8 | 88 | 5 | 37 | 8 × 1 | — |
| #343 | Brick 1 × 8 | 48 | 10 | 37 | 8 × 1 | — |
| #344 | Brick 1 × 8 | 56 | 10 | 37 | 8 × 1 | — |
| #345 | Brick 1 × 8 | 64 | 10 | 37 | 8 × 1 | — |
| #346 | Brick 1 × 8 | 72 | 10 | 37 | 8 × 1 | — |
| #347 | Brick 1 × 8 | 80 | 10 | 37 | 8 × 1 | — |
| #348 | Brick 1 × 8 | 88 | 10 | 37 | 8 × 1 | — |
| #375 | Brick 1 × 8 | 48 | 15 | 37 | 8 × 1 | — |
| #376 | Brick 1 × 8 | 56 | 15 | 37 | 8 × 1 | — |
| #377 | Brick 1 × 8 | 64 | 15 | 37 | 8 × 1 | — |
| #378 | Brick 1 × 8 | 72 | 15 | 37 | 8 × 1 | — |
| #379 | Brick 1 × 8 | 80 | 15 | 37 | 8 × 1 | — |
| #380 | Brick 1 × 8 | 88 | 15 | 37 | 8 × 1 | — |
02 Deck / STEP 77 OF 244
Deck structure · layer 37 · 3/3
- Work along the bridge from left to right. Temporarily support the long deck between piers while pressing pieces together. Keep the offset seams shown in the diagram.
- Place these 16 pieces with their bottoms 37 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
16 × Brick 1 × 8
Bright red · element 300821
Bright red · element 300821
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #317 | Brick 1 × 8 | 96 | 0 | 37 | 8 × 1 | — |
| #318 | Brick 1 × 8 | 104 | 0 | 37 | 8 × 1 | — |
| #319 | Brick 1 × 8 | 112 | 0 | 37 | 8 × 1 | — |
| #320 | Brick 1 × 8 | 120 | 0 | 37 | 8 × 1 | — |
| #333 | Brick 1 × 8 | 96 | 5 | 37 | 8 × 1 | — |
| #334 | Brick 1 × 8 | 104 | 5 | 37 | 8 × 1 | — |
| #335 | Brick 1 × 8 | 112 | 5 | 37 | 8 × 1 | — |
| #336 | Brick 1 × 8 | 120 | 5 | 37 | 8 × 1 | — |
| #349 | Brick 1 × 8 | 96 | 10 | 37 | 8 × 1 | — |
| #350 | Brick 1 × 8 | 104 | 10 | 37 | 8 × 1 | — |
| #351 | Brick 1 × 8 | 112 | 10 | 37 | 8 × 1 | — |
| #352 | Brick 1 × 8 | 120 | 10 | 37 | 8 × 1 | — |
| #381 | Brick 1 × 8 | 96 | 15 | 37 | 8 × 1 | — |
| #382 | Brick 1 × 8 | 104 | 15 | 37 | 8 × 1 | — |
| #383 | Brick 1 × 8 | 112 | 15 | 37 | 8 × 1 | — |
| #384 | Brick 1 × 8 | 120 | 15 | 37 | 8 × 1 | — |
02 Deck / STEP 78 OF 244
Deck structure · layer 40 · 1/6
- Work along the bridge from left to right. Temporarily support the long deck between piers while pressing pieces together. Keep the offset seams shown in the diagram.
- Place these 24 pieces with their bottoms 40 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
24 × Plate 2 × 8
Bright red · element 303421
Bright red · element 303421
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #385 | Plate 2 × 8 | 0 | 0 | 40 | 8 × 2 | — |
| #386 | Plate 2 × 8 | 8 | 0 | 40 | 8 × 2 | — |
| #387 | Plate 2 × 8 | 16 | 0 | 40 | 8 × 2 | — |
| #418 | Plate 2 × 8 | 0 | 2 | 40 | 8 × 2 | — |
| #419 | Plate 2 × 8 | 8 | 2 | 40 | 8 × 2 | — |
| #420 | Plate 2 × 8 | 16 | 2 | 40 | 8 × 2 | — |
| #451 | Plate 2 × 8 | 0 | 4 | 40 | 8 × 2 | — |
| #452 | Plate 2 × 8 | 8 | 4 | 40 | 8 × 2 | — |
| #453 | Plate 2 × 8 | 16 | 4 | 40 | 8 × 2 | — |
| #484 | Plate 2 × 8 | 0 | 6 | 40 | 8 × 2 | — |
| #485 | Plate 2 × 8 | 8 | 6 | 40 | 8 × 2 | — |
| #486 | Plate 2 × 8 | 16 | 6 | 40 | 8 × 2 | — |
| #517 | Plate 2 × 8 | 0 | 8 | 40 | 8 × 2 | — |
| #518 | Plate 2 × 8 | 8 | 8 | 40 | 8 × 2 | — |
| #519 | Plate 2 × 8 | 16 | 8 | 40 | 8 × 2 | — |
| #550 | Plate 2 × 8 | 0 | 10 | 40 | 8 × 2 | — |
| #551 | Plate 2 × 8 | 8 | 10 | 40 | 8 × 2 | — |
| #552 | Plate 2 × 8 | 16 | 10 | 40 | 8 × 2 | — |
| #583 | Plate 2 × 8 | 0 | 12 | 40 | 8 × 2 | — |
| #584 | Plate 2 × 8 | 8 | 12 | 40 | 8 × 2 | — |
| #585 | Plate 2 × 8 | 16 | 12 | 40 | 8 × 2 | — |
| #616 | Plate 2 × 8 | 0 | 14 | 40 | 8 × 2 | — |
| #617 | Plate 2 × 8 | 8 | 14 | 40 | 8 × 2 | — |
| #618 | Plate 2 × 8 | 16 | 14 | 40 | 8 × 2 | — |
02 Deck / STEP 79 OF 244
Deck structure · layer 40 · 2/6
- Work along the bridge from left to right. Temporarily support the long deck between piers while pressing pieces together. Keep the offset seams shown in the diagram.
- Place these 24 pieces with their bottoms 40 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
24 × Plate 2 × 8
Bright red · element 303421
Bright red · element 303421
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #388 | Plate 2 × 8 | 24 | 0 | 40 | 8 × 2 | — |
| #389 | Plate 2 × 8 | 32 | 0 | 40 | 8 × 2 | — |
| #390 | Plate 2 × 8 | 40 | 0 | 40 | 8 × 2 | — |
| #421 | Plate 2 × 8 | 24 | 2 | 40 | 8 × 2 | — |
| #422 | Plate 2 × 8 | 32 | 2 | 40 | 8 × 2 | — |
| #423 | Plate 2 × 8 | 40 | 2 | 40 | 8 × 2 | — |
| #454 | Plate 2 × 8 | 24 | 4 | 40 | 8 × 2 | — |
| #455 | Plate 2 × 8 | 32 | 4 | 40 | 8 × 2 | — |
| #456 | Plate 2 × 8 | 40 | 4 | 40 | 8 × 2 | — |
| #487 | Plate 2 × 8 | 24 | 6 | 40 | 8 × 2 | — |
| #488 | Plate 2 × 8 | 32 | 6 | 40 | 8 × 2 | — |
| #489 | Plate 2 × 8 | 40 | 6 | 40 | 8 × 2 | — |
| #520 | Plate 2 × 8 | 24 | 8 | 40 | 8 × 2 | — |
| #521 | Plate 2 × 8 | 32 | 8 | 40 | 8 × 2 | — |
| #522 | Plate 2 × 8 | 40 | 8 | 40 | 8 × 2 | — |
| #553 | Plate 2 × 8 | 24 | 10 | 40 | 8 × 2 | — |
| #554 | Plate 2 × 8 | 32 | 10 | 40 | 8 × 2 | — |
| #555 | Plate 2 × 8 | 40 | 10 | 40 | 8 × 2 | — |
| #586 | Plate 2 × 8 | 24 | 12 | 40 | 8 × 2 | — |
| #587 | Plate 2 × 8 | 32 | 12 | 40 | 8 × 2 | — |
| #588 | Plate 2 × 8 | 40 | 12 | 40 | 8 × 2 | — |
| #619 | Plate 2 × 8 | 24 | 14 | 40 | 8 × 2 | — |
| #620 | Plate 2 × 8 | 32 | 14 | 40 | 8 × 2 | — |
| #621 | Plate 2 × 8 | 40 | 14 | 40 | 8 × 2 | — |
02 Deck / STEP 80 OF 244
Deck structure · layer 40 · 3/6
- Work along the bridge from left to right. Temporarily support the long deck between piers while pressing pieces together. Keep the offset seams shown in the diagram.
- Place these 24 pieces with their bottoms 40 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
24 × Plate 2 × 8
Bright red · element 303421
Bright red · element 303421
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #391 | Plate 2 × 8 | 48 | 0 | 40 | 8 × 2 | — |
| #392 | Plate 2 × 8 | 56 | 0 | 40 | 8 × 2 | — |
| #393 | Plate 2 × 8 | 64 | 0 | 40 | 8 × 2 | — |
| #424 | Plate 2 × 8 | 48 | 2 | 40 | 8 × 2 | — |
| #425 | Plate 2 × 8 | 56 | 2 | 40 | 8 × 2 | — |
| #426 | Plate 2 × 8 | 64 | 2 | 40 | 8 × 2 | — |
| #457 | Plate 2 × 8 | 48 | 4 | 40 | 8 × 2 | — |
| #458 | Plate 2 × 8 | 56 | 4 | 40 | 8 × 2 | — |
| #459 | Plate 2 × 8 | 64 | 4 | 40 | 8 × 2 | — |
| #490 | Plate 2 × 8 | 48 | 6 | 40 | 8 × 2 | — |
| #491 | Plate 2 × 8 | 56 | 6 | 40 | 8 × 2 | — |
| #492 | Plate 2 × 8 | 64 | 6 | 40 | 8 × 2 | — |
| #523 | Plate 2 × 8 | 48 | 8 | 40 | 8 × 2 | — |
| #524 | Plate 2 × 8 | 56 | 8 | 40 | 8 × 2 | — |
| #525 | Plate 2 × 8 | 64 | 8 | 40 | 8 × 2 | — |
| #556 | Plate 2 × 8 | 48 | 10 | 40 | 8 × 2 | — |
| #557 | Plate 2 × 8 | 56 | 10 | 40 | 8 × 2 | — |
| #558 | Plate 2 × 8 | 64 | 10 | 40 | 8 × 2 | — |
| #589 | Plate 2 × 8 | 48 | 12 | 40 | 8 × 2 | — |
| #590 | Plate 2 × 8 | 56 | 12 | 40 | 8 × 2 | — |
| #591 | Plate 2 × 8 | 64 | 12 | 40 | 8 × 2 | — |
| #622 | Plate 2 × 8 | 48 | 14 | 40 | 8 × 2 | — |
| #623 | Plate 2 × 8 | 56 | 14 | 40 | 8 × 2 | — |
| #624 | Plate 2 × 8 | 64 | 14 | 40 | 8 × 2 | — |
02 Deck / STEP 81 OF 244
Deck structure · layer 40 · 4/6
- Work along the bridge from left to right. Temporarily support the long deck between piers while pressing pieces together. Keep the offset seams shown in the diagram.
- Place these 24 pieces with their bottoms 40 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
24 × Plate 2 × 8
Bright red · element 303421
Bright red · element 303421
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #394 | Plate 2 × 8 | 72 | 0 | 40 | 8 × 2 | — |
| #395 | Plate 2 × 8 | 80 | 0 | 40 | 8 × 2 | — |
| #396 | Plate 2 × 8 | 88 | 0 | 40 | 8 × 2 | — |
| #427 | Plate 2 × 8 | 72 | 2 | 40 | 8 × 2 | — |
| #428 | Plate 2 × 8 | 80 | 2 | 40 | 8 × 2 | — |
| #429 | Plate 2 × 8 | 88 | 2 | 40 | 8 × 2 | — |
| #460 | Plate 2 × 8 | 72 | 4 | 40 | 8 × 2 | — |
| #461 | Plate 2 × 8 | 80 | 4 | 40 | 8 × 2 | — |
| #462 | Plate 2 × 8 | 88 | 4 | 40 | 8 × 2 | — |
| #493 | Plate 2 × 8 | 72 | 6 | 40 | 8 × 2 | — |
| #494 | Plate 2 × 8 | 80 | 6 | 40 | 8 × 2 | — |
| #495 | Plate 2 × 8 | 88 | 6 | 40 | 8 × 2 | — |
| #526 | Plate 2 × 8 | 72 | 8 | 40 | 8 × 2 | — |
| #527 | Plate 2 × 8 | 80 | 8 | 40 | 8 × 2 | — |
| #528 | Plate 2 × 8 | 88 | 8 | 40 | 8 × 2 | — |
| #559 | Plate 2 × 8 | 72 | 10 | 40 | 8 × 2 | — |
| #560 | Plate 2 × 8 | 80 | 10 | 40 | 8 × 2 | — |
| #561 | Plate 2 × 8 | 88 | 10 | 40 | 8 × 2 | — |
| #592 | Plate 2 × 8 | 72 | 12 | 40 | 8 × 2 | — |
| #593 | Plate 2 × 8 | 80 | 12 | 40 | 8 × 2 | — |
| #594 | Plate 2 × 8 | 88 | 12 | 40 | 8 × 2 | — |
| #625 | Plate 2 × 8 | 72 | 14 | 40 | 8 × 2 | — |
| #626 | Plate 2 × 8 | 80 | 14 | 40 | 8 × 2 | — |
| #627 | Plate 2 × 8 | 88 | 14 | 40 | 8 × 2 | — |
02 Deck / STEP 82 OF 244
Deck structure · layer 40 · 5/6
- Work along the bridge from left to right. Temporarily support the long deck between piers while pressing pieces together. Keep the offset seams shown in the diagram.
- Place these 24 pieces with their bottoms 40 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
24 × Plate 2 × 8
Bright red · element 303421
Bright red · element 303421
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #397 | Plate 2 × 8 | 96 | 0 | 40 | 8 × 2 | — |
| #398 | Plate 2 × 8 | 104 | 0 | 40 | 8 × 2 | — |
| #399 | Plate 2 × 8 | 112 | 0 | 40 | 8 × 2 | — |
| #430 | Plate 2 × 8 | 96 | 2 | 40 | 8 × 2 | — |
| #431 | Plate 2 × 8 | 104 | 2 | 40 | 8 × 2 | — |
| #432 | Plate 2 × 8 | 112 | 2 | 40 | 8 × 2 | — |
| #463 | Plate 2 × 8 | 96 | 4 | 40 | 8 × 2 | — |
| #464 | Plate 2 × 8 | 104 | 4 | 40 | 8 × 2 | — |
| #465 | Plate 2 × 8 | 112 | 4 | 40 | 8 × 2 | — |
| #496 | Plate 2 × 8 | 96 | 6 | 40 | 8 × 2 | — |
| #497 | Plate 2 × 8 | 104 | 6 | 40 | 8 × 2 | — |
| #498 | Plate 2 × 8 | 112 | 6 | 40 | 8 × 2 | — |
| #529 | Plate 2 × 8 | 96 | 8 | 40 | 8 × 2 | — |
| #530 | Plate 2 × 8 | 104 | 8 | 40 | 8 × 2 | — |
| #531 | Plate 2 × 8 | 112 | 8 | 40 | 8 × 2 | — |
| #562 | Plate 2 × 8 | 96 | 10 | 40 | 8 × 2 | — |
| #563 | Plate 2 × 8 | 104 | 10 | 40 | 8 × 2 | — |
| #564 | Plate 2 × 8 | 112 | 10 | 40 | 8 × 2 | — |
| #595 | Plate 2 × 8 | 96 | 12 | 40 | 8 × 2 | — |
| #596 | Plate 2 × 8 | 104 | 12 | 40 | 8 × 2 | — |
| #597 | Plate 2 × 8 | 112 | 12 | 40 | 8 × 2 | — |
| #628 | Plate 2 × 8 | 96 | 14 | 40 | 8 × 2 | — |
| #629 | Plate 2 × 8 | 104 | 14 | 40 | 8 × 2 | — |
| #630 | Plate 2 × 8 | 112 | 14 | 40 | 8 × 2 | — |
02 Deck / STEP 83 OF 244
Deck structure · layer 40 · 6/6
- Work along the bridge from left to right. Temporarily support the long deck between piers while pressing pieces together. Keep the offset seams shown in the diagram.
- Place these 8 pieces with their bottoms 40 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
8 × Plate 2 × 8
Bright red · element 303421
Bright red · element 303421
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #400 | Plate 2 × 8 | 120 | 0 | 40 | 8 × 2 | — |
| #433 | Plate 2 × 8 | 120 | 2 | 40 | 8 × 2 | — |
| #466 | Plate 2 × 8 | 120 | 4 | 40 | 8 × 2 | — |
| #499 | Plate 2 × 8 | 120 | 6 | 40 | 8 × 2 | — |
| #532 | Plate 2 × 8 | 120 | 8 | 40 | 8 × 2 | — |
| #565 | Plate 2 × 8 | 120 | 10 | 40 | 8 × 2 | — |
| #598 | Plate 2 × 8 | 120 | 12 | 40 | 8 × 2 | — |
| #631 | Plate 2 × 8 | 120 | 14 | 40 | 8 × 2 | — |
02 Deck / STEP 84 OF 244
Deck structure · layer 41 · 1/6
- Work along the bridge from left to right. Temporarily support the long deck between piers while pressing pieces together. Keep the offset seams shown in the diagram.
- Place these 24 pieces with their bottoms 41 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
8 × Plate 2 × 4
Bright red · element 30202116 × Plate 2 × 8
Bright red · element 303421
Bright red · element 30202116 × Plate 2 × 8
Bright red · element 303421
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #401 | Plate 2 × 4 | 0 | 0 | 41 | 4 × 2 | — |
| #402 | Plate 2 × 8 | 4 | 0 | 41 | 8 × 2 | — |
| #403 | Plate 2 × 8 | 12 | 0 | 41 | 8 × 2 | — |
| #434 | Plate 2 × 4 | 0 | 2 | 41 | 4 × 2 | — |
| #435 | Plate 2 × 8 | 4 | 2 | 41 | 8 × 2 | — |
| #436 | Plate 2 × 8 | 12 | 2 | 41 | 8 × 2 | — |
| #467 | Plate 2 × 4 | 0 | 4 | 41 | 4 × 2 | — |
| #468 | Plate 2 × 8 | 4 | 4 | 41 | 8 × 2 | — |
| #469 | Plate 2 × 8 | 12 | 4 | 41 | 8 × 2 | — |
| #500 | Plate 2 × 4 | 0 | 6 | 41 | 4 × 2 | — |
| #501 | Plate 2 × 8 | 4 | 6 | 41 | 8 × 2 | — |
| #502 | Plate 2 × 8 | 12 | 6 | 41 | 8 × 2 | — |
| #533 | Plate 2 × 4 | 0 | 8 | 41 | 4 × 2 | — |
| #534 | Plate 2 × 8 | 4 | 8 | 41 | 8 × 2 | — |
| #535 | Plate 2 × 8 | 12 | 8 | 41 | 8 × 2 | — |
| #566 | Plate 2 × 4 | 0 | 10 | 41 | 4 × 2 | — |
| #567 | Plate 2 × 8 | 4 | 10 | 41 | 8 × 2 | — |
| #568 | Plate 2 × 8 | 12 | 10 | 41 | 8 × 2 | — |
| #599 | Plate 2 × 4 | 0 | 12 | 41 | 4 × 2 | — |
| #600 | Plate 2 × 8 | 4 | 12 | 41 | 8 × 2 | — |
| #601 | Plate 2 × 8 | 12 | 12 | 41 | 8 × 2 | — |
| #632 | Plate 2 × 4 | 0 | 14 | 41 | 4 × 2 | — |
| #633 | Plate 2 × 8 | 4 | 14 | 41 | 8 × 2 | — |
| #634 | Plate 2 × 8 | 12 | 14 | 41 | 8 × 2 | — |
02 Deck / STEP 85 OF 244
Deck structure · layer 41 · 2/6
- Work along the bridge from left to right. Temporarily support the long deck between piers while pressing pieces together. Keep the offset seams shown in the diagram.
- Place these 24 pieces with their bottoms 41 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
24 × Plate 2 × 8
Bright red · element 303421
Bright red · element 303421
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #404 | Plate 2 × 8 | 20 | 0 | 41 | 8 × 2 | — |
| #405 | Plate 2 × 8 | 28 | 0 | 41 | 8 × 2 | — |
| #406 | Plate 2 × 8 | 36 | 0 | 41 | 8 × 2 | — |
| #437 | Plate 2 × 8 | 20 | 2 | 41 | 8 × 2 | — |
| #438 | Plate 2 × 8 | 28 | 2 | 41 | 8 × 2 | — |
| #439 | Plate 2 × 8 | 36 | 2 | 41 | 8 × 2 | — |
| #470 | Plate 2 × 8 | 20 | 4 | 41 | 8 × 2 | — |
| #471 | Plate 2 × 8 | 28 | 4 | 41 | 8 × 2 | — |
| #472 | Plate 2 × 8 | 36 | 4 | 41 | 8 × 2 | — |
| #503 | Plate 2 × 8 | 20 | 6 | 41 | 8 × 2 | — |
| #504 | Plate 2 × 8 | 28 | 6 | 41 | 8 × 2 | — |
| #505 | Plate 2 × 8 | 36 | 6 | 41 | 8 × 2 | — |
| #536 | Plate 2 × 8 | 20 | 8 | 41 | 8 × 2 | — |
| #537 | Plate 2 × 8 | 28 | 8 | 41 | 8 × 2 | — |
| #538 | Plate 2 × 8 | 36 | 8 | 41 | 8 × 2 | — |
| #569 | Plate 2 × 8 | 20 | 10 | 41 | 8 × 2 | — |
| #570 | Plate 2 × 8 | 28 | 10 | 41 | 8 × 2 | — |
| #571 | Plate 2 × 8 | 36 | 10 | 41 | 8 × 2 | — |
| #602 | Plate 2 × 8 | 20 | 12 | 41 | 8 × 2 | — |
| #603 | Plate 2 × 8 | 28 | 12 | 41 | 8 × 2 | — |
| #604 | Plate 2 × 8 | 36 | 12 | 41 | 8 × 2 | — |
| #635 | Plate 2 × 8 | 20 | 14 | 41 | 8 × 2 | — |
| #636 | Plate 2 × 8 | 28 | 14 | 41 | 8 × 2 | — |
| #637 | Plate 2 × 8 | 36 | 14 | 41 | 8 × 2 | — |
02 Deck / STEP 86 OF 244
Deck structure · layer 41 · 3/6
- Work along the bridge from left to right. Temporarily support the long deck between piers while pressing pieces together. Keep the offset seams shown in the diagram.
- Place these 24 pieces with their bottoms 41 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
24 × Plate 2 × 8
Bright red · element 303421
Bright red · element 303421
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #407 | Plate 2 × 8 | 44 | 0 | 41 | 8 × 2 | — |
| #408 | Plate 2 × 8 | 52 | 0 | 41 | 8 × 2 | — |
| #409 | Plate 2 × 8 | 60 | 0 | 41 | 8 × 2 | — |
| #440 | Plate 2 × 8 | 44 | 2 | 41 | 8 × 2 | — |
| #441 | Plate 2 × 8 | 52 | 2 | 41 | 8 × 2 | — |
| #442 | Plate 2 × 8 | 60 | 2 | 41 | 8 × 2 | — |
| #473 | Plate 2 × 8 | 44 | 4 | 41 | 8 × 2 | — |
| #474 | Plate 2 × 8 | 52 | 4 | 41 | 8 × 2 | — |
| #475 | Plate 2 × 8 | 60 | 4 | 41 | 8 × 2 | — |
| #506 | Plate 2 × 8 | 44 | 6 | 41 | 8 × 2 | — |
| #507 | Plate 2 × 8 | 52 | 6 | 41 | 8 × 2 | — |
| #508 | Plate 2 × 8 | 60 | 6 | 41 | 8 × 2 | — |
| #539 | Plate 2 × 8 | 44 | 8 | 41 | 8 × 2 | — |
| #540 | Plate 2 × 8 | 52 | 8 | 41 | 8 × 2 | — |
| #541 | Plate 2 × 8 | 60 | 8 | 41 | 8 × 2 | — |
| #572 | Plate 2 × 8 | 44 | 10 | 41 | 8 × 2 | — |
| #573 | Plate 2 × 8 | 52 | 10 | 41 | 8 × 2 | — |
| #574 | Plate 2 × 8 | 60 | 10 | 41 | 8 × 2 | — |
| #605 | Plate 2 × 8 | 44 | 12 | 41 | 8 × 2 | — |
| #606 | Plate 2 × 8 | 52 | 12 | 41 | 8 × 2 | — |
| #607 | Plate 2 × 8 | 60 | 12 | 41 | 8 × 2 | — |
| #638 | Plate 2 × 8 | 44 | 14 | 41 | 8 × 2 | — |
| #639 | Plate 2 × 8 | 52 | 14 | 41 | 8 × 2 | — |
| #640 | Plate 2 × 8 | 60 | 14 | 41 | 8 × 2 | — |
02 Deck / STEP 87 OF 244
Deck structure · layer 41 · 4/6
- Work along the bridge from left to right. Temporarily support the long deck between piers while pressing pieces together. Keep the offset seams shown in the diagram.
- Place these 24 pieces with their bottoms 41 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
24 × Plate 2 × 8
Bright red · element 303421
Bright red · element 303421
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #410 | Plate 2 × 8 | 68 | 0 | 41 | 8 × 2 | — |
| #411 | Plate 2 × 8 | 76 | 0 | 41 | 8 × 2 | — |
| #412 | Plate 2 × 8 | 84 | 0 | 41 | 8 × 2 | — |
| #443 | Plate 2 × 8 | 68 | 2 | 41 | 8 × 2 | — |
| #444 | Plate 2 × 8 | 76 | 2 | 41 | 8 × 2 | — |
| #445 | Plate 2 × 8 | 84 | 2 | 41 | 8 × 2 | — |
| #476 | Plate 2 × 8 | 68 | 4 | 41 | 8 × 2 | — |
| #477 | Plate 2 × 8 | 76 | 4 | 41 | 8 × 2 | — |
| #478 | Plate 2 × 8 | 84 | 4 | 41 | 8 × 2 | — |
| #509 | Plate 2 × 8 | 68 | 6 | 41 | 8 × 2 | — |
| #510 | Plate 2 × 8 | 76 | 6 | 41 | 8 × 2 | — |
| #511 | Plate 2 × 8 | 84 | 6 | 41 | 8 × 2 | — |
| #542 | Plate 2 × 8 | 68 | 8 | 41 | 8 × 2 | — |
| #543 | Plate 2 × 8 | 76 | 8 | 41 | 8 × 2 | — |
| #544 | Plate 2 × 8 | 84 | 8 | 41 | 8 × 2 | — |
| #575 | Plate 2 × 8 | 68 | 10 | 41 | 8 × 2 | — |
| #576 | Plate 2 × 8 | 76 | 10 | 41 | 8 × 2 | — |
| #577 | Plate 2 × 8 | 84 | 10 | 41 | 8 × 2 | — |
| #608 | Plate 2 × 8 | 68 | 12 | 41 | 8 × 2 | — |
| #609 | Plate 2 × 8 | 76 | 12 | 41 | 8 × 2 | — |
| #610 | Plate 2 × 8 | 84 | 12 | 41 | 8 × 2 | — |
| #641 | Plate 2 × 8 | 68 | 14 | 41 | 8 × 2 | — |
| #642 | Plate 2 × 8 | 76 | 14 | 41 | 8 × 2 | — |
| #643 | Plate 2 × 8 | 84 | 14 | 41 | 8 × 2 | — |
02 Deck / STEP 88 OF 244
Deck structure · layer 41 · 5/6
- Work along the bridge from left to right. Temporarily support the long deck between piers while pressing pieces together. Keep the offset seams shown in the diagram.
- Place these 24 pieces with their bottoms 41 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
24 × Plate 2 × 8
Bright red · element 303421
Bright red · element 303421
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #413 | Plate 2 × 8 | 92 | 0 | 41 | 8 × 2 | — |
| #414 | Plate 2 × 8 | 100 | 0 | 41 | 8 × 2 | — |
| #415 | Plate 2 × 8 | 108 | 0 | 41 | 8 × 2 | — |
| #446 | Plate 2 × 8 | 92 | 2 | 41 | 8 × 2 | — |
| #447 | Plate 2 × 8 | 100 | 2 | 41 | 8 × 2 | — |
| #448 | Plate 2 × 8 | 108 | 2 | 41 | 8 × 2 | — |
| #479 | Plate 2 × 8 | 92 | 4 | 41 | 8 × 2 | — |
| #480 | Plate 2 × 8 | 100 | 4 | 41 | 8 × 2 | — |
| #481 | Plate 2 × 8 | 108 | 4 | 41 | 8 × 2 | — |
| #512 | Plate 2 × 8 | 92 | 6 | 41 | 8 × 2 | — |
| #513 | Plate 2 × 8 | 100 | 6 | 41 | 8 × 2 | — |
| #514 | Plate 2 × 8 | 108 | 6 | 41 | 8 × 2 | — |
| #545 | Plate 2 × 8 | 92 | 8 | 41 | 8 × 2 | — |
| #546 | Plate 2 × 8 | 100 | 8 | 41 | 8 × 2 | — |
| #547 | Plate 2 × 8 | 108 | 8 | 41 | 8 × 2 | — |
| #578 | Plate 2 × 8 | 92 | 10 | 41 | 8 × 2 | — |
| #579 | Plate 2 × 8 | 100 | 10 | 41 | 8 × 2 | — |
| #580 | Plate 2 × 8 | 108 | 10 | 41 | 8 × 2 | — |
| #611 | Plate 2 × 8 | 92 | 12 | 41 | 8 × 2 | — |
| #612 | Plate 2 × 8 | 100 | 12 | 41 | 8 × 2 | — |
| #613 | Plate 2 × 8 | 108 | 12 | 41 | 8 × 2 | — |
| #644 | Plate 2 × 8 | 92 | 14 | 41 | 8 × 2 | — |
| #645 | Plate 2 × 8 | 100 | 14 | 41 | 8 × 2 | — |
| #646 | Plate 2 × 8 | 108 | 14 | 41 | 8 × 2 | — |
02 Deck / STEP 89 OF 244
Deck structure · layer 41 · 6/6
- Work along the bridge from left to right. Temporarily support the long deck between piers while pressing pieces together. Keep the offset seams shown in the diagram.
- Place these 16 pieces with their bottoms 41 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
8 × Plate 2 × 8
Bright red · element 3034218 × Plate 2 × 4
Bright red · element 302021
Bright red · element 3034218 × Plate 2 × 4
Bright red · element 302021
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #416 | Plate 2 × 8 | 116 | 0 | 41 | 8 × 2 | — |
| #417 | Plate 2 × 4 | 124 | 0 | 41 | 4 × 2 | — |
| #449 | Plate 2 × 8 | 116 | 2 | 41 | 8 × 2 | — |
| #450 | Plate 2 × 4 | 124 | 2 | 41 | 4 × 2 | — |
| #482 | Plate 2 × 8 | 116 | 4 | 41 | 8 × 2 | — |
| #483 | Plate 2 × 4 | 124 | 4 | 41 | 4 × 2 | — |
| #515 | Plate 2 × 8 | 116 | 6 | 41 | 8 × 2 | — |
| #516 | Plate 2 × 4 | 124 | 6 | 41 | 4 × 2 | — |
| #548 | Plate 2 × 8 | 116 | 8 | 41 | 8 × 2 | — |
| #549 | Plate 2 × 4 | 124 | 8 | 41 | 4 × 2 | — |
| #581 | Plate 2 × 8 | 116 | 10 | 41 | 8 × 2 | — |
| #582 | Plate 2 × 4 | 124 | 10 | 41 | 4 × 2 | — |
| #614 | Plate 2 × 8 | 116 | 12 | 41 | 8 × 2 | — |
| #615 | Plate 2 × 4 | 124 | 12 | 41 | 4 × 2 | — |
| #647 | Plate 2 × 8 | 116 | 14 | 41 | 8 × 2 | — |
| #648 | Plate 2 × 4 | 124 | 14 | 41 | 4 × 2 | — |
02 Deck / STEP 90 OF 244
Deck structure · layer 42 · 1/7
- Work along the bridge from left to right. Temporarily support the long deck between piers while pressing pieces together. Keep the offset seams shown in the diagram.
- Place these 24 pieces with their bottoms 42 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
15 × Plate 2 × 8
Bright red · element 3034219 × Plate 2 × 4
Bright red · element 302021
Bright red · element 3034219 × Plate 2 × 4
Bright red · element 302021
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #649 | Plate 2 × 8 | 0 | 0 | 42 | 2 × 8 | — |
| #650 | Plate 2 × 8 | 0 | 8 | 42 | 2 × 8 | — |
| #651 | Plate 2 × 4 | 2 | 0 | 42 | 2 × 4 | — |
| #652 | Plate 2 × 8 | 2 | 4 | 42 | 2 × 8 | — |
| #653 | Plate 2 × 4 | 2 | 12 | 42 | 2 × 4 | — |
| #654 | Plate 2 × 8 | 4 | 0 | 42 | 2 × 8 | — |
| #655 | Plate 2 × 8 | 4 | 8 | 42 | 2 × 8 | — |
| #656 | Plate 2 × 4 | 6 | 0 | 42 | 2 × 4 | — |
| #657 | Plate 2 × 8 | 6 | 4 | 42 | 2 × 8 | — |
| #658 | Plate 2 × 4 | 6 | 12 | 42 | 2 × 4 | — |
| #659 | Plate 2 × 8 | 8 | 0 | 42 | 2 × 8 | — |
| #660 | Plate 2 × 8 | 8 | 8 | 42 | 2 × 8 | — |
| #661 | Plate 2 × 4 | 10 | 0 | 42 | 2 × 4 | — |
| #662 | Plate 2 × 8 | 10 | 4 | 42 | 2 × 8 | — |
| #663 | Plate 2 × 4 | 10 | 12 | 42 | 2 × 4 | — |
| #664 | Plate 2 × 8 | 12 | 0 | 42 | 2 × 8 | — |
| #665 | Plate 2 × 8 | 12 | 8 | 42 | 2 × 8 | — |
| #666 | Plate 2 × 4 | 14 | 0 | 42 | 2 × 4 | — |
| #667 | Plate 2 × 8 | 14 | 4 | 42 | 2 × 8 | — |
| #668 | Plate 2 × 4 | 14 | 12 | 42 | 2 × 4 | — |
| #669 | Plate 2 × 8 | 16 | 0 | 42 | 2 × 8 | — |
| #670 | Plate 2 × 8 | 16 | 8 | 42 | 2 × 8 | — |
| #671 | Plate 2 × 4 | 18 | 0 | 42 | 2 × 4 | — |
| #672 | Plate 2 × 8 | 18 | 4 | 42 | 2 × 8 | — |
02 Deck / STEP 91 OF 244
Deck structure · layer 42 · 2/7
- Work along the bridge from left to right. Temporarily support the long deck between piers while pressing pieces together. Keep the offset seams shown in the diagram.
- Place these 24 pieces with their bottoms 42 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
10 × Plate 2 × 4
Bright red · element 30202114 × Plate 2 × 8
Bright red · element 303421
Bright red · element 30202114 × Plate 2 × 8
Bright red · element 303421
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #673 | Plate 2 × 4 | 18 | 12 | 42 | 2 × 4 | — |
| #674 | Plate 2 × 8 | 20 | 0 | 42 | 2 × 8 | — |
| #675 | Plate 2 × 8 | 20 | 8 | 42 | 2 × 8 | — |
| #676 | Plate 2 × 4 | 22 | 0 | 42 | 2 × 4 | — |
| #677 | Plate 2 × 8 | 22 | 4 | 42 | 2 × 8 | — |
| #678 | Plate 2 × 4 | 22 | 12 | 42 | 2 × 4 | — |
| #679 | Plate 2 × 8 | 24 | 0 | 42 | 2 × 8 | — |
| #680 | Plate 2 × 8 | 24 | 8 | 42 | 2 × 8 | — |
| #681 | Plate 2 × 4 | 26 | 0 | 42 | 2 × 4 | — |
| #682 | Plate 2 × 8 | 26 | 4 | 42 | 2 × 8 | — |
| #683 | Plate 2 × 4 | 26 | 12 | 42 | 2 × 4 | — |
| #684 | Plate 2 × 8 | 28 | 0 | 42 | 2 × 8 | — |
| #685 | Plate 2 × 8 | 28 | 8 | 42 | 2 × 8 | — |
| #686 | Plate 2 × 4 | 30 | 0 | 42 | 2 × 4 | — |
| #687 | Plate 2 × 8 | 30 | 4 | 42 | 2 × 8 | — |
| #688 | Plate 2 × 4 | 30 | 12 | 42 | 2 × 4 | — |
| #689 | Plate 2 × 8 | 32 | 0 | 42 | 2 × 8 | — |
| #690 | Plate 2 × 8 | 32 | 8 | 42 | 2 × 8 | — |
| #691 | Plate 2 × 4 | 34 | 0 | 42 | 2 × 4 | — |
| #692 | Plate 2 × 8 | 34 | 4 | 42 | 2 × 8 | — |
| #693 | Plate 2 × 4 | 34 | 12 | 42 | 2 × 4 | — |
| #694 | Plate 2 × 8 | 36 | 0 | 42 | 2 × 8 | — |
| #695 | Plate 2 × 8 | 36 | 8 | 42 | 2 × 8 | — |
| #696 | Plate 2 × 4 | 38 | 0 | 42 | 2 × 4 | — |
02 Deck / STEP 92 OF 244
Deck structure · layer 42 · 3/7
- Work along the bridge from left to right. Temporarily support the long deck between piers while pressing pieces together. Keep the offset seams shown in the diagram.
- Place these 24 pieces with their bottoms 42 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
15 × Plate 2 × 8
Bright red · element 3034219 × Plate 2 × 4
Bright red · element 302021
Bright red · element 3034219 × Plate 2 × 4
Bright red · element 302021
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #697 | Plate 2 × 8 | 38 | 4 | 42 | 2 × 8 | — |
| #698 | Plate 2 × 4 | 38 | 12 | 42 | 2 × 4 | — |
| #699 | Plate 2 × 8 | 40 | 0 | 42 | 2 × 8 | — |
| #700 | Plate 2 × 8 | 40 | 8 | 42 | 2 × 8 | — |
| #701 | Plate 2 × 4 | 42 | 0 | 42 | 2 × 4 | — |
| #702 | Plate 2 × 8 | 42 | 4 | 42 | 2 × 8 | — |
| #703 | Plate 2 × 4 | 42 | 12 | 42 | 2 × 4 | — |
| #704 | Plate 2 × 8 | 44 | 0 | 42 | 2 × 8 | — |
| #705 | Plate 2 × 8 | 44 | 8 | 42 | 2 × 8 | — |
| #706 | Plate 2 × 4 | 46 | 0 | 42 | 2 × 4 | — |
| #707 | Plate 2 × 8 | 46 | 4 | 42 | 2 × 8 | — |
| #708 | Plate 2 × 4 | 46 | 12 | 42 | 2 × 4 | — |
| #709 | Plate 2 × 8 | 48 | 0 | 42 | 2 × 8 | — |
| #710 | Plate 2 × 8 | 48 | 8 | 42 | 2 × 8 | — |
| #711 | Plate 2 × 4 | 50 | 0 | 42 | 2 × 4 | — |
| #712 | Plate 2 × 8 | 50 | 4 | 42 | 2 × 8 | — |
| #713 | Plate 2 × 4 | 50 | 12 | 42 | 2 × 4 | — |
| #714 | Plate 2 × 8 | 52 | 0 | 42 | 2 × 8 | — |
| #715 | Plate 2 × 8 | 52 | 8 | 42 | 2 × 8 | — |
| #716 | Plate 2 × 4 | 54 | 0 | 42 | 2 × 4 | — |
| #717 | Plate 2 × 8 | 54 | 4 | 42 | 2 × 8 | — |
| #718 | Plate 2 × 4 | 54 | 12 | 42 | 2 × 4 | — |
| #719 | Plate 2 × 8 | 56 | 0 | 42 | 2 × 8 | — |
| #720 | Plate 2 × 8 | 56 | 8 | 42 | 2 × 8 | — |
02 Deck / STEP 93 OF 244
Deck structure · layer 42 · 4/7
- Work along the bridge from left to right. Temporarily support the long deck between piers while pressing pieces together. Keep the offset seams shown in the diagram.
- Place these 24 pieces with their bottoms 42 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
10 × Plate 2 × 4
Bright red · element 30202114 × Plate 2 × 8
Bright red · element 303421
Bright red · element 30202114 × Plate 2 × 8
Bright red · element 303421
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #721 | Plate 2 × 4 | 58 | 0 | 42 | 2 × 4 | — |
| #722 | Plate 2 × 8 | 58 | 4 | 42 | 2 × 8 | — |
| #723 | Plate 2 × 4 | 58 | 12 | 42 | 2 × 4 | — |
| #724 | Plate 2 × 8 | 60 | 0 | 42 | 2 × 8 | — |
| #725 | Plate 2 × 8 | 60 | 8 | 42 | 2 × 8 | — |
| #726 | Plate 2 × 4 | 62 | 0 | 42 | 2 × 4 | — |
| #727 | Plate 2 × 8 | 62 | 4 | 42 | 2 × 8 | — |
| #728 | Plate 2 × 4 | 62 | 12 | 42 | 2 × 4 | — |
| #729 | Plate 2 × 8 | 64 | 0 | 42 | 2 × 8 | — |
| #730 | Plate 2 × 8 | 64 | 8 | 42 | 2 × 8 | — |
| #731 | Plate 2 × 4 | 66 | 0 | 42 | 2 × 4 | — |
| #732 | Plate 2 × 8 | 66 | 4 | 42 | 2 × 8 | — |
| #733 | Plate 2 × 4 | 66 | 12 | 42 | 2 × 4 | — |
| #734 | Plate 2 × 8 | 68 | 0 | 42 | 2 × 8 | — |
| #735 | Plate 2 × 8 | 68 | 8 | 42 | 2 × 8 | — |
| #736 | Plate 2 × 4 | 70 | 0 | 42 | 2 × 4 | — |
| #737 | Plate 2 × 8 | 70 | 4 | 42 | 2 × 8 | — |
| #738 | Plate 2 × 4 | 70 | 12 | 42 | 2 × 4 | — |
| #739 | Plate 2 × 8 | 72 | 0 | 42 | 2 × 8 | — |
| #740 | Plate 2 × 8 | 72 | 8 | 42 | 2 × 8 | — |
| #741 | Plate 2 × 4 | 74 | 0 | 42 | 2 × 4 | — |
| #742 | Plate 2 × 8 | 74 | 4 | 42 | 2 × 8 | — |
| #743 | Plate 2 × 4 | 74 | 12 | 42 | 2 × 4 | — |
| #744 | Plate 2 × 8 | 76 | 0 | 42 | 2 × 8 | — |
02 Deck / STEP 94 OF 244
Deck structure · layer 42 · 5/7
- Work along the bridge from left to right. Temporarily support the long deck between piers while pressing pieces together. Keep the offset seams shown in the diagram.
- Place these 24 pieces with their bottoms 42 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
14 × Plate 2 × 8
Bright red · element 30342110 × Plate 2 × 4
Bright red · element 302021
Bright red · element 30342110 × Plate 2 × 4
Bright red · element 302021
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #745 | Plate 2 × 8 | 76 | 8 | 42 | 2 × 8 | — |
| #746 | Plate 2 × 4 | 78 | 0 | 42 | 2 × 4 | — |
| #747 | Plate 2 × 8 | 78 | 4 | 42 | 2 × 8 | — |
| #748 | Plate 2 × 4 | 78 | 12 | 42 | 2 × 4 | — |
| #749 | Plate 2 × 8 | 80 | 0 | 42 | 2 × 8 | — |
| #750 | Plate 2 × 8 | 80 | 8 | 42 | 2 × 8 | — |
| #751 | Plate 2 × 4 | 82 | 0 | 42 | 2 × 4 | — |
| #752 | Plate 2 × 8 | 82 | 4 | 42 | 2 × 8 | — |
| #753 | Plate 2 × 4 | 82 | 12 | 42 | 2 × 4 | — |
| #754 | Plate 2 × 8 | 84 | 0 | 42 | 2 × 8 | — |
| #755 | Plate 2 × 8 | 84 | 8 | 42 | 2 × 8 | — |
| #756 | Plate 2 × 4 | 86 | 0 | 42 | 2 × 4 | — |
| #757 | Plate 2 × 8 | 86 | 4 | 42 | 2 × 8 | — |
| #758 | Plate 2 × 4 | 86 | 12 | 42 | 2 × 4 | — |
| #759 | Plate 2 × 8 | 88 | 0 | 42 | 2 × 8 | — |
| #760 | Plate 2 × 8 | 88 | 8 | 42 | 2 × 8 | — |
| #761 | Plate 2 × 4 | 90 | 0 | 42 | 2 × 4 | — |
| #762 | Plate 2 × 8 | 90 | 4 | 42 | 2 × 8 | — |
| #763 | Plate 2 × 4 | 90 | 12 | 42 | 2 × 4 | — |
| #764 | Plate 2 × 8 | 92 | 0 | 42 | 2 × 8 | — |
| #765 | Plate 2 × 8 | 92 | 8 | 42 | 2 × 8 | — |
| #766 | Plate 2 × 4 | 94 | 0 | 42 | 2 × 4 | — |
| #767 | Plate 2 × 8 | 94 | 4 | 42 | 2 × 8 | — |
| #768 | Plate 2 × 4 | 94 | 12 | 42 | 2 × 4 | — |
02 Deck / STEP 95 OF 244
Deck structure · layer 42 · 6/7
- Work along the bridge from left to right. Temporarily support the long deck between piers while pressing pieces together. Keep the offset seams shown in the diagram.
- Place these 24 pieces with their bottoms 42 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
15 × Plate 2 × 8
Bright red · element 3034219 × Plate 2 × 4
Bright red · element 302021
Bright red · element 3034219 × Plate 2 × 4
Bright red · element 302021
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #769 | Plate 2 × 8 | 96 | 0 | 42 | 2 × 8 | — |
| #770 | Plate 2 × 8 | 96 | 8 | 42 | 2 × 8 | — |
| #771 | Plate 2 × 4 | 98 | 0 | 42 | 2 × 4 | — |
| #772 | Plate 2 × 8 | 98 | 4 | 42 | 2 × 8 | — |
| #773 | Plate 2 × 4 | 98 | 12 | 42 | 2 × 4 | — |
| #774 | Plate 2 × 8 | 100 | 0 | 42 | 2 × 8 | — |
| #775 | Plate 2 × 8 | 100 | 8 | 42 | 2 × 8 | — |
| #776 | Plate 2 × 4 | 102 | 0 | 42 | 2 × 4 | — |
| #777 | Plate 2 × 8 | 102 | 4 | 42 | 2 × 8 | — |
| #778 | Plate 2 × 4 | 102 | 12 | 42 | 2 × 4 | — |
| #779 | Plate 2 × 8 | 104 | 0 | 42 | 2 × 8 | — |
| #780 | Plate 2 × 8 | 104 | 8 | 42 | 2 × 8 | — |
| #781 | Plate 2 × 4 | 106 | 0 | 42 | 2 × 4 | — |
| #782 | Plate 2 × 8 | 106 | 4 | 42 | 2 × 8 | — |
| #783 | Plate 2 × 4 | 106 | 12 | 42 | 2 × 4 | — |
| #784 | Plate 2 × 8 | 108 | 0 | 42 | 2 × 8 | — |
| #785 | Plate 2 × 8 | 108 | 8 | 42 | 2 × 8 | — |
| #786 | Plate 2 × 4 | 110 | 0 | 42 | 2 × 4 | — |
| #787 | Plate 2 × 8 | 110 | 4 | 42 | 2 × 8 | — |
| #788 | Plate 2 × 4 | 110 | 12 | 42 | 2 × 4 | — |
| #789 | Plate 2 × 8 | 112 | 0 | 42 | 2 × 8 | — |
| #790 | Plate 2 × 8 | 112 | 8 | 42 | 2 × 8 | — |
| #791 | Plate 2 × 4 | 114 | 0 | 42 | 2 × 4 | — |
| #792 | Plate 2 × 8 | 114 | 4 | 42 | 2 × 8 | — |
02 Deck / STEP 96 OF 244
Deck structure · layer 42 · 7/7
- Work along the bridge from left to right. Temporarily support the long deck between piers while pressing pieces together. Keep the offset seams shown in the diagram.
- Place these 16 pieces with their bottoms 42 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
7 × Plate 2 × 4
Bright red · element 3020219 × Plate 2 × 8
Bright red · element 303421
Bright red · element 3020219 × Plate 2 × 8
Bright red · element 303421
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #793 | Plate 2 × 4 | 114 | 12 | 42 | 2 × 4 | — |
| #794 | Plate 2 × 8 | 116 | 0 | 42 | 2 × 8 | — |
| #795 | Plate 2 × 8 | 116 | 8 | 42 | 2 × 8 | — |
| #796 | Plate 2 × 4 | 118 | 0 | 42 | 2 × 4 | — |
| #797 | Plate 2 × 8 | 118 | 4 | 42 | 2 × 8 | — |
| #798 | Plate 2 × 4 | 118 | 12 | 42 | 2 × 4 | — |
| #799 | Plate 2 × 8 | 120 | 0 | 42 | 2 × 8 | — |
| #800 | Plate 2 × 8 | 120 | 8 | 42 | 2 × 8 | — |
| #801 | Plate 2 × 4 | 122 | 0 | 42 | 2 × 4 | — |
| #802 | Plate 2 × 8 | 122 | 4 | 42 | 2 × 8 | — |
| #803 | Plate 2 × 4 | 122 | 12 | 42 | 2 × 4 | — |
| #804 | Plate 2 × 8 | 124 | 0 | 42 | 2 × 8 | — |
| #805 | Plate 2 × 8 | 124 | 8 | 42 | 2 × 8 | — |
| #806 | Plate 2 × 4 | 126 | 0 | 42 | 2 × 4 | — |
| #807 | Plate 2 × 8 | 126 | 4 | 42 | 2 × 8 | — |
| #808 | Plate 2 × 4 | 126 | 12 | 42 | 2 × 4 | — |
03 Roadway / STEP 97 OF 244
Road and walkways · layer 43 · 1/18
- Match the grey road tiles and white lane markings to the parts list. Keep the tower openings clear and build the railings outward from the road.
- Place these 24 pieces with their bottoms 43 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
8 × Plate 2 × 4
Bright red · element 30202112 × Tile 2 × 2
Dark stone grey · element 42110552 × Tile 1 × 2
Dark stone grey · element 42110522 × Tile 1 × 2
White · element 306901
Bright red · element 30202112 × Tile 2 × 2
Dark stone grey · element 42110552 × Tile 1 × 2
Dark stone grey · element 42110522 × Tile 1 × 2
White · element 306901
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #809 | Plate 2 × 4 | 0 | 0 | 43 | 4 × 2 | — |
| #810 | Plate 2 × 4 | 0 | 2 | 43 | 4 × 2 | — |
| #811 | Plate 2 × 4 | 0 | 12 | 43 | 4 × 2 | — |
| #812 | Plate 2 × 4 | 0 | 14 | 43 | 4 × 2 | — |
| #813 | Plate 2 × 4 | 4 | 0 | 43 | 4 × 2 | — |
| #814 | Plate 2 × 4 | 4 | 2 | 43 | 4 × 2 | — |
| #815 | Plate 2 × 4 | 4 | 12 | 43 | 4 × 2 | — |
| #816 | Plate 2 × 4 | 4 | 14 | 43 | 4 × 2 | — |
| #937 | Tile 2 × 2 | 0 | 4 | 43 | 2 × 2 | — |
| #938 | Tile 2 × 2 | 0 | 10 | 43 | 2 × 2 | — |
| #939 | Tile 1 × 2 | 0 | 7 | 43 | 2 × 1 | — |
| #940 | Tile 1 × 2 | 0 | 6 | 43 | 2 × 1 | — |
| #941 | Tile 1 × 2 | 0 | 8 | 43 | 2 × 1 | — |
| #942 | Tile 1 × 2 | 0 | 9 | 43 | 2 × 1 | — |
| #943 | Tile 2 × 2 | 2 | 4 | 43 | 2 × 2 | — |
| #944 | Tile 2 × 2 | 2 | 10 | 43 | 2 × 2 | — |
| #945 | Tile 2 × 2 | 2 | 6 | 43 | 2 × 2 | — |
| #946 | Tile 2 × 2 | 2 | 8 | 43 | 2 × 2 | — |
| #947 | Tile 2 × 2 | 4 | 4 | 43 | 2 × 2 | — |
| #948 | Tile 2 × 2 | 4 | 10 | 43 | 2 × 2 | — |
| #949 | Tile 2 × 2 | 4 | 6 | 43 | 2 × 2 | — |
| #950 | Tile 2 × 2 | 4 | 8 | 43 | 2 × 2 | — |
| #951 | Tile 2 × 2 | 6 | 4 | 43 | 2 × 2 | — |
| #953 | Tile 2 × 2 | 6 | 6 | 43 | 2 × 2 | — |
03 Roadway / STEP 98 OF 244
Road and walkways · layer 43 · 2/18
- Match the grey road tiles and white lane markings to the parts list. Keep the tower openings clear and build the railings outward from the road.
- Place these 24 pieces with their bottoms 43 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
12 × Tile 2 × 2
Dark stone grey · element 42110558 × Plate 2 × 4
Bright red · element 3020212 × Tile 1 × 2
Dark stone grey · element 42110522 × Tile 1 × 2
White · element 306901
Dark stone grey · element 42110558 × Plate 2 × 4
Bright red · element 3020212 × Tile 1 × 2
Dark stone grey · element 42110522 × Tile 1 × 2
White · element 306901
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #817 | Plate 2 × 4 | 8 | 0 | 43 | 4 × 2 | — |
| #818 | Plate 2 × 4 | 8 | 2 | 43 | 4 × 2 | — |
| #819 | Plate 2 × 4 | 8 | 12 | 43 | 4 × 2 | — |
| #820 | Plate 2 × 4 | 8 | 14 | 43 | 4 × 2 | — |
| #821 | Plate 2 × 4 | 12 | 0 | 43 | 4 × 2 | — |
| #822 | Plate 2 × 4 | 12 | 2 | 43 | 4 × 2 | — |
| #823 | Plate 2 × 4 | 12 | 12 | 43 | 4 × 2 | — |
| #824 | Plate 2 × 4 | 12 | 14 | 43 | 4 × 2 | — |
| #952 | Tile 2 × 2 | 6 | 10 | 43 | 2 × 2 | — |
| #954 | Tile 2 × 2 | 6 | 8 | 43 | 2 × 2 | — |
| #955 | Tile 2 × 2 | 8 | 4 | 43 | 2 × 2 | — |
| #956 | Tile 2 × 2 | 8 | 10 | 43 | 2 × 2 | — |
| #957 | Tile 1 × 2 | 8 | 7 | 43 | 2 × 1 | — |
| #958 | Tile 1 × 2 | 8 | 6 | 43 | 2 × 1 | — |
| #959 | Tile 1 × 2 | 8 | 8 | 43 | 2 × 1 | — |
| #960 | Tile 1 × 2 | 8 | 9 | 43 | 2 × 1 | — |
| #961 | Tile 2 × 2 | 10 | 4 | 43 | 2 × 2 | — |
| #962 | Tile 2 × 2 | 10 | 10 | 43 | 2 × 2 | — |
| #963 | Tile 2 × 2 | 10 | 6 | 43 | 2 × 2 | — |
| #964 | Tile 2 × 2 | 10 | 8 | 43 | 2 × 2 | — |
| #965 | Tile 2 × 2 | 12 | 4 | 43 | 2 × 2 | — |
| #966 | Tile 2 × 2 | 12 | 10 | 43 | 2 × 2 | — |
| #967 | Tile 2 × 2 | 12 | 6 | 43 | 2 × 2 | — |
| #968 | Tile 2 × 2 | 12 | 8 | 43 | 2 × 2 | — |
03 Roadway / STEP 99 OF 244
Road and walkways · layer 43 · 3/18
- Match the grey road tiles and white lane markings to the parts list. Keep the tower openings clear and build the railings outward from the road.
- Place these 24 pieces with their bottoms 43 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
14 × Tile 2 × 2
Dark stone grey · element 42110556 × Plate 2 × 4
Bright red · element 3020212 × Tile 1 × 2
Dark stone grey · element 42110522 × Tile 1 × 2
White · element 306901
Dark stone grey · element 42110556 × Plate 2 × 4
Bright red · element 3020212 × Tile 1 × 2
Dark stone grey · element 42110522 × Tile 1 × 2
White · element 306901
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #825 | Plate 2 × 4 | 16 | 0 | 43 | 4 × 2 | — |
| #826 | Plate 2 × 4 | 16 | 2 | 43 | 4 × 2 | — |
| #827 | Plate 2 × 4 | 16 | 12 | 43 | 4 × 2 | — |
| #828 | Plate 2 × 4 | 16 | 14 | 43 | 4 × 2 | — |
| #829 | Plate 2 × 4 | 20 | 0 | 43 | 4 × 2 | — |
| #830 | Plate 2 × 4 | 20 | 2 | 43 | 4 × 2 | — |
| #969 | Tile 2 × 2 | 14 | 4 | 43 | 2 × 2 | — |
| #970 | Tile 2 × 2 | 14 | 10 | 43 | 2 × 2 | — |
| #971 | Tile 2 × 2 | 14 | 6 | 43 | 2 × 2 | — |
| #972 | Tile 2 × 2 | 14 | 8 | 43 | 2 × 2 | — |
| #973 | Tile 2 × 2 | 16 | 4 | 43 | 2 × 2 | — |
| #974 | Tile 2 × 2 | 16 | 10 | 43 | 2 × 2 | — |
| #975 | Tile 1 × 2 | 16 | 7 | 43 | 2 × 1 | — |
| #976 | Tile 1 × 2 | 16 | 6 | 43 | 2 × 1 | — |
| #977 | Tile 1 × 2 | 16 | 8 | 43 | 2 × 1 | — |
| #978 | Tile 1 × 2 | 16 | 9 | 43 | 2 × 1 | — |
| #979 | Tile 2 × 2 | 18 | 4 | 43 | 2 × 2 | — |
| #980 | Tile 2 × 2 | 18 | 10 | 43 | 2 × 2 | — |
| #981 | Tile 2 × 2 | 18 | 6 | 43 | 2 × 2 | — |
| #982 | Tile 2 × 2 | 18 | 8 | 43 | 2 × 2 | — |
| #983 | Tile 2 × 2 | 20 | 4 | 43 | 2 × 2 | — |
| #984 | Tile 2 × 2 | 20 | 10 | 43 | 2 × 2 | — |
| #985 | Tile 2 × 2 | 20 | 6 | 43 | 2 × 2 | — |
| #986 | Tile 2 × 2 | 20 | 8 | 43 | 2 × 2 | — |
03 Roadway / STEP 100 OF 244
Road and walkways · layer 43 · 4/18
- Match the grey road tiles and white lane markings to the parts list. Keep the tower openings clear and build the railings outward from the road.
- Place these 24 pieces with their bottoms 43 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
8 × Plate 2 × 4
Bright red · element 30202112 × Tile 2 × 2
Dark stone grey · element 42110552 × Tile 1 × 2
Dark stone grey · element 42110522 × Tile 1 × 2
White · element 306901
Bright red · element 30202112 × Tile 2 × 2
Dark stone grey · element 42110552 × Tile 1 × 2
Dark stone grey · element 42110522 × Tile 1 × 2
White · element 306901
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #831 | Plate 2 × 4 | 20 | 12 | 43 | 4 × 2 | — |
| #832 | Plate 2 × 4 | 20 | 14 | 43 | 4 × 2 | — |
| #833 | Plate 2 × 4 | 24 | 0 | 43 | 4 × 2 | — |
| #834 | Plate 2 × 4 | 24 | 2 | 43 | 4 × 2 | — |
| #835 | Plate 2 × 4 | 24 | 12 | 43 | 4 × 2 | — |
| #836 | Plate 2 × 4 | 24 | 14 | 43 | 4 × 2 | — |
| #837 | Plate 2 × 4 | 28 | 0 | 43 | 4 × 2 | — |
| #838 | Plate 2 × 4 | 28 | 2 | 43 | 4 × 2 | — |
| #987 | Tile 2 × 2 | 22 | 4 | 43 | 2 × 2 | — |
| #988 | Tile 2 × 2 | 22 | 10 | 43 | 2 × 2 | — |
| #989 | Tile 2 × 2 | 22 | 6 | 43 | 2 × 2 | — |
| #990 | Tile 2 × 2 | 22 | 8 | 43 | 2 × 2 | — |
| #991 | Tile 2 × 2 | 24 | 4 | 43 | 2 × 2 | — |
| #992 | Tile 2 × 2 | 24 | 10 | 43 | 2 × 2 | — |
| #993 | Tile 1 × 2 | 24 | 7 | 43 | 2 × 1 | — |
| #994 | Tile 1 × 2 | 24 | 6 | 43 | 2 × 1 | — |
| #995 | Tile 1 × 2 | 24 | 8 | 43 | 2 × 1 | — |
| #996 | Tile 1 × 2 | 24 | 9 | 43 | 2 × 1 | — |
| #997 | Tile 2 × 2 | 26 | 4 | 43 | 2 × 2 | — |
| #998 | Tile 2 × 2 | 26 | 10 | 43 | 2 × 2 | — |
| #999 | Tile 2 × 2 | 26 | 6 | 43 | 2 × 2 | — |
| #1000 | Tile 2 × 2 | 26 | 8 | 43 | 2 × 2 | — |
| #1001 | Tile 2 × 2 | 28 | 4 | 43 | 2 × 2 | — |
| #1003 | Tile 2 × 2 | 28 | 6 | 43 | 2 × 2 | — |
03 Roadway / STEP 101 OF 244
Road and walkways · layer 43 · 5/18
- Match the grey road tiles and white lane markings to the parts list. Keep the tower openings clear and build the railings outward from the road.
- Place these 24 pieces with their bottoms 43 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
12 × Tile 2 × 2
Dark stone grey · element 42110558 × Plate 2 × 4
Bright red · element 3020212 × Tile 1 × 2
Dark stone grey · element 42110522 × Tile 1 × 2
White · element 306901
Dark stone grey · element 42110558 × Plate 2 × 4
Bright red · element 3020212 × Tile 1 × 2
Dark stone grey · element 42110522 × Tile 1 × 2
White · element 306901
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #839 | Plate 2 × 4 | 28 | 12 | 43 | 4 × 2 | — |
| #840 | Plate 2 × 4 | 28 | 14 | 43 | 4 × 2 | — |
| #841 | Plate 2 × 4 | 32 | 0 | 43 | 4 × 2 | — |
| #842 | Plate 2 × 4 | 32 | 2 | 43 | 4 × 2 | — |
| #843 | Plate 2 × 4 | 32 | 12 | 43 | 4 × 2 | — |
| #844 | Plate 2 × 4 | 32 | 14 | 43 | 4 × 2 | — |
| #845 | Plate 2 × 4 | 36 | 0 | 43 | 4 × 2 | — |
| #846 | Plate 2 × 4 | 36 | 2 | 43 | 4 × 2 | — |
| #1002 | Tile 2 × 2 | 28 | 10 | 43 | 2 × 2 | — |
| #1004 | Tile 2 × 2 | 28 | 8 | 43 | 2 × 2 | — |
| #1005 | Tile 2 × 2 | 30 | 4 | 43 | 2 × 2 | — |
| #1006 | Tile 2 × 2 | 30 | 10 | 43 | 2 × 2 | — |
| #1007 | Tile 2 × 2 | 30 | 6 | 43 | 2 × 2 | — |
| #1008 | Tile 2 × 2 | 30 | 8 | 43 | 2 × 2 | — |
| #1009 | Tile 2 × 2 | 32 | 4 | 43 | 2 × 2 | — |
| #1010 | Tile 2 × 2 | 32 | 10 | 43 | 2 × 2 | — |
| #1011 | Tile 1 × 2 | 32 | 7 | 43 | 2 × 1 | — |
| #1012 | Tile 1 × 2 | 32 | 6 | 43 | 2 × 1 | — |
| #1013 | Tile 1 × 2 | 32 | 8 | 43 | 2 × 1 | — |
| #1014 | Tile 1 × 2 | 32 | 9 | 43 | 2 × 1 | — |
| #1015 | Tile 2 × 2 | 34 | 4 | 43 | 2 × 2 | — |
| #1016 | Tile 2 × 2 | 34 | 10 | 43 | 2 × 2 | — |
| #1017 | Tile 2 × 2 | 34 | 6 | 43 | 2 × 2 | — |
| #1018 | Tile 2 × 2 | 34 | 8 | 43 | 2 × 2 | — |
03 Roadway / STEP 102 OF 244
Road and walkways · layer 43 · 6/18
- Match the grey road tiles and white lane markings to the parts list. Keep the tower openings clear and build the railings outward from the road.
- Place these 24 pieces with their bottoms 43 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
14 × Tile 2 × 2
Dark stone grey · element 42110556 × Plate 2 × 4
Bright red · element 3020212 × Tile 1 × 2
Dark stone grey · element 42110522 × Tile 1 × 2
White · element 306901
Dark stone grey · element 42110556 × Plate 2 × 4
Bright red · element 3020212 × Tile 1 × 2
Dark stone grey · element 42110522 × Tile 1 × 2
White · element 306901
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #847 | Plate 2 × 4 | 36 | 12 | 43 | 4 × 2 | — |
| #848 | Plate 2 × 4 | 36 | 14 | 43 | 4 × 2 | — |
| #849 | Plate 2 × 4 | 40 | 0 | 43 | 4 × 2 | — |
| #850 | Plate 2 × 4 | 40 | 2 | 43 | 4 × 2 | — |
| #851 | Plate 2 × 4 | 40 | 12 | 43 | 4 × 2 | — |
| #852 | Plate 2 × 4 | 40 | 14 | 43 | 4 × 2 | — |
| #1019 | Tile 2 × 2 | 36 | 4 | 43 | 2 × 2 | — |
| #1020 | Tile 2 × 2 | 36 | 10 | 43 | 2 × 2 | — |
| #1021 | Tile 2 × 2 | 36 | 6 | 43 | 2 × 2 | — |
| #1022 | Tile 2 × 2 | 36 | 8 | 43 | 2 × 2 | — |
| #1023 | Tile 2 × 2 | 38 | 4 | 43 | 2 × 2 | — |
| #1024 | Tile 2 × 2 | 38 | 10 | 43 | 2 × 2 | — |
| #1025 | Tile 2 × 2 | 38 | 6 | 43 | 2 × 2 | — |
| #1026 | Tile 2 × 2 | 38 | 8 | 43 | 2 × 2 | — |
| #1027 | Tile 2 × 2 | 40 | 4 | 43 | 2 × 2 | — |
| #1028 | Tile 2 × 2 | 40 | 10 | 43 | 2 × 2 | — |
| #1029 | Tile 1 × 2 | 40 | 7 | 43 | 2 × 1 | — |
| #1030 | Tile 1 × 2 | 40 | 6 | 43 | 2 × 1 | — |
| #1031 | Tile 1 × 2 | 40 | 8 | 43 | 2 × 1 | — |
| #1032 | Tile 1 × 2 | 40 | 9 | 43 | 2 × 1 | — |
| #1033 | Tile 2 × 2 | 42 | 4 | 43 | 2 × 2 | — |
| #1034 | Tile 2 × 2 | 42 | 10 | 43 | 2 × 2 | — |
| #1035 | Tile 2 × 2 | 42 | 6 | 43 | 2 × 2 | — |
| #1036 | Tile 2 × 2 | 42 | 8 | 43 | 2 × 2 | — |
03 Roadway / STEP 103 OF 244
Road and walkways · layer 43 · 7/18
- Match the grey road tiles and white lane markings to the parts list. Keep the tower openings clear and build the railings outward from the road.
- Place these 24 pieces with their bottoms 43 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
8 × Plate 2 × 4
Bright red · element 30202112 × Tile 2 × 2
Dark stone grey · element 42110552 × Tile 1 × 2
Dark stone grey · element 42110522 × Tile 1 × 2
White · element 306901
Bright red · element 30202112 × Tile 2 × 2
Dark stone grey · element 42110552 × Tile 1 × 2
Dark stone grey · element 42110522 × Tile 1 × 2
White · element 306901
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #853 | Plate 2 × 4 | 44 | 0 | 43 | 4 × 2 | — |
| #854 | Plate 2 × 4 | 44 | 2 | 43 | 4 × 2 | — |
| #855 | Plate 2 × 4 | 44 | 12 | 43 | 4 × 2 | — |
| #856 | Plate 2 × 4 | 44 | 14 | 43 | 4 × 2 | — |
| #857 | Plate 2 × 4 | 48 | 0 | 43 | 4 × 2 | — |
| #858 | Plate 2 × 4 | 48 | 2 | 43 | 4 × 2 | — |
| #859 | Plate 2 × 4 | 48 | 12 | 43 | 4 × 2 | — |
| #860 | Plate 2 × 4 | 48 | 14 | 43 | 4 × 2 | — |
| #1037 | Tile 2 × 2 | 44 | 4 | 43 | 2 × 2 | — |
| #1038 | Tile 2 × 2 | 44 | 10 | 43 | 2 × 2 | — |
| #1039 | Tile 2 × 2 | 44 | 6 | 43 | 2 × 2 | — |
| #1040 | Tile 2 × 2 | 44 | 8 | 43 | 2 × 2 | — |
| #1041 | Tile 2 × 2 | 46 | 4 | 43 | 2 × 2 | — |
| #1042 | Tile 2 × 2 | 46 | 10 | 43 | 2 × 2 | — |
| #1043 | Tile 2 × 2 | 46 | 6 | 43 | 2 × 2 | — |
| #1044 | Tile 2 × 2 | 46 | 8 | 43 | 2 × 2 | — |
| #1045 | Tile 2 × 2 | 48 | 4 | 43 | 2 × 2 | — |
| #1046 | Tile 2 × 2 | 48 | 10 | 43 | 2 × 2 | — |
| #1047 | Tile 1 × 2 | 48 | 7 | 43 | 2 × 1 | — |
| #1048 | Tile 1 × 2 | 48 | 6 | 43 | 2 × 1 | — |
| #1049 | Tile 1 × 2 | 48 | 8 | 43 | 2 × 1 | — |
| #1050 | Tile 1 × 2 | 48 | 9 | 43 | 2 × 1 | — |
| #1051 | Tile 2 × 2 | 50 | 4 | 43 | 2 × 2 | — |
| #1053 | Tile 2 × 2 | 50 | 6 | 43 | 2 × 2 | — |
03 Roadway / STEP 104 OF 244
Road and walkways · layer 43 · 8/18
- Match the grey road tiles and white lane markings to the parts list. Keep the tower openings clear and build the railings outward from the road.
- Place these 24 pieces with their bottoms 43 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
12 × Tile 2 × 2
Dark stone grey · element 42110558 × Plate 2 × 4
Bright red · element 3020212 × Tile 1 × 2
Dark stone grey · element 42110522 × Tile 1 × 2
White · element 306901
Dark stone grey · element 42110558 × Plate 2 × 4
Bright red · element 3020212 × Tile 1 × 2
Dark stone grey · element 42110522 × Tile 1 × 2
White · element 306901
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #861 | Plate 2 × 4 | 52 | 0 | 43 | 4 × 2 | — |
| #862 | Plate 2 × 4 | 52 | 2 | 43 | 4 × 2 | — |
| #863 | Plate 2 × 4 | 52 | 12 | 43 | 4 × 2 | — |
| #864 | Plate 2 × 4 | 52 | 14 | 43 | 4 × 2 | — |
| #865 | Plate 2 × 4 | 56 | 0 | 43 | 4 × 2 | — |
| #866 | Plate 2 × 4 | 56 | 2 | 43 | 4 × 2 | — |
| #867 | Plate 2 × 4 | 56 | 12 | 43 | 4 × 2 | — |
| #868 | Plate 2 × 4 | 56 | 14 | 43 | 4 × 2 | — |
| #1052 | Tile 2 × 2 | 50 | 10 | 43 | 2 × 2 | — |
| #1054 | Tile 2 × 2 | 50 | 8 | 43 | 2 × 2 | — |
| #1055 | Tile 2 × 2 | 52 | 4 | 43 | 2 × 2 | — |
| #1056 | Tile 2 × 2 | 52 | 10 | 43 | 2 × 2 | — |
| #1057 | Tile 2 × 2 | 52 | 6 | 43 | 2 × 2 | — |
| #1058 | Tile 2 × 2 | 52 | 8 | 43 | 2 × 2 | — |
| #1059 | Tile 2 × 2 | 54 | 4 | 43 | 2 × 2 | — |
| #1060 | Tile 2 × 2 | 54 | 10 | 43 | 2 × 2 | — |
| #1061 | Tile 2 × 2 | 54 | 6 | 43 | 2 × 2 | — |
| #1062 | Tile 2 × 2 | 54 | 8 | 43 | 2 × 2 | — |
| #1063 | Tile 2 × 2 | 56 | 4 | 43 | 2 × 2 | — |
| #1064 | Tile 2 × 2 | 56 | 10 | 43 | 2 × 2 | — |
| #1065 | Tile 1 × 2 | 56 | 7 | 43 | 2 × 1 | — |
| #1066 | Tile 1 × 2 | 56 | 6 | 43 | 2 × 1 | — |
| #1067 | Tile 1 × 2 | 56 | 8 | 43 | 2 × 1 | — |
| #1068 | Tile 1 × 2 | 56 | 9 | 43 | 2 × 1 | — |
03 Roadway / STEP 105 OF 244
Road and walkways · layer 43 · 9/18
- Match the grey road tiles and white lane markings to the parts list. Keep the tower openings clear and build the railings outward from the road.
- Place these 24 pieces with their bottoms 43 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
14 × Tile 2 × 2
Dark stone grey · element 42110556 × Plate 2 × 4
Bright red · element 3020212 × Tile 1 × 2
Dark stone grey · element 42110522 × Tile 1 × 2
White · element 306901
Dark stone grey · element 42110556 × Plate 2 × 4
Bright red · element 3020212 × Tile 1 × 2
Dark stone grey · element 42110522 × Tile 1 × 2
White · element 306901
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #869 | Plate 2 × 4 | 60 | 0 | 43 | 4 × 2 | — |
| #870 | Plate 2 × 4 | 60 | 2 | 43 | 4 × 2 | — |
| #871 | Plate 2 × 4 | 60 | 12 | 43 | 4 × 2 | — |
| #872 | Plate 2 × 4 | 60 | 14 | 43 | 4 × 2 | — |
| #873 | Plate 2 × 4 | 64 | 0 | 43 | 4 × 2 | — |
| #874 | Plate 2 × 4 | 64 | 2 | 43 | 4 × 2 | — |
| #1069 | Tile 2 × 2 | 58 | 4 | 43 | 2 × 2 | — |
| #1070 | Tile 2 × 2 | 58 | 10 | 43 | 2 × 2 | — |
| #1071 | Tile 2 × 2 | 58 | 6 | 43 | 2 × 2 | — |
| #1072 | Tile 2 × 2 | 58 | 8 | 43 | 2 × 2 | — |
| #1073 | Tile 2 × 2 | 60 | 4 | 43 | 2 × 2 | — |
| #1074 | Tile 2 × 2 | 60 | 10 | 43 | 2 × 2 | — |
| #1075 | Tile 2 × 2 | 60 | 6 | 43 | 2 × 2 | — |
| #1076 | Tile 2 × 2 | 60 | 8 | 43 | 2 × 2 | — |
| #1077 | Tile 2 × 2 | 62 | 4 | 43 | 2 × 2 | — |
| #1078 | Tile 2 × 2 | 62 | 10 | 43 | 2 × 2 | — |
| #1079 | Tile 2 × 2 | 62 | 6 | 43 | 2 × 2 | — |
| #1080 | Tile 2 × 2 | 62 | 8 | 43 | 2 × 2 | — |
| #1081 | Tile 2 × 2 | 64 | 4 | 43 | 2 × 2 | — |
| #1082 | Tile 2 × 2 | 64 | 10 | 43 | 2 × 2 | — |
| #1083 | Tile 1 × 2 | 64 | 7 | 43 | 2 × 1 | — |
| #1084 | Tile 1 × 2 | 64 | 6 | 43 | 2 × 1 | — |
| #1085 | Tile 1 × 2 | 64 | 8 | 43 | 2 × 1 | — |
| #1086 | Tile 1 × 2 | 64 | 9 | 43 | 2 × 1 | — |
03 Roadway / STEP 106 OF 244
Road and walkways · layer 43 · 10/18
- Match the grey road tiles and white lane markings to the parts list. Keep the tower openings clear and build the railings outward from the road.
- Place these 24 pieces with their bottoms 43 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
8 × Plate 2 × 4
Bright red · element 30202113 × Tile 2 × 2
Dark stone grey · element 42110551 × Tile 1 × 2
Dark stone grey · element 42110522 × Tile 1 × 2
White · element 306901
Bright red · element 30202113 × Tile 2 × 2
Dark stone grey · element 42110551 × Tile 1 × 2
Dark stone grey · element 42110522 × Tile 1 × 2
White · element 306901
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #875 | Plate 2 × 4 | 64 | 12 | 43 | 4 × 2 | — |
| #876 | Plate 2 × 4 | 64 | 14 | 43 | 4 × 2 | — |
| #877 | Plate 2 × 4 | 68 | 0 | 43 | 4 × 2 | — |
| #878 | Plate 2 × 4 | 68 | 2 | 43 | 4 × 2 | — |
| #879 | Plate 2 × 4 | 68 | 12 | 43 | 4 × 2 | — |
| #880 | Plate 2 × 4 | 68 | 14 | 43 | 4 × 2 | — |
| #881 | Plate 2 × 4 | 72 | 0 | 43 | 4 × 2 | — |
| #882 | Plate 2 × 4 | 72 | 2 | 43 | 4 × 2 | — |
| #1087 | Tile 2 × 2 | 66 | 4 | 43 | 2 × 2 | — |
| #1088 | Tile 2 × 2 | 66 | 10 | 43 | 2 × 2 | — |
| #1089 | Tile 2 × 2 | 66 | 6 | 43 | 2 × 2 | — |
| #1090 | Tile 2 × 2 | 66 | 8 | 43 | 2 × 2 | — |
| #1091 | Tile 2 × 2 | 68 | 4 | 43 | 2 × 2 | — |
| #1092 | Tile 2 × 2 | 68 | 10 | 43 | 2 × 2 | — |
| #1093 | Tile 2 × 2 | 68 | 6 | 43 | 2 × 2 | — |
| #1094 | Tile 2 × 2 | 68 | 8 | 43 | 2 × 2 | — |
| #1095 | Tile 2 × 2 | 70 | 4 | 43 | 2 × 2 | — |
| #1096 | Tile 2 × 2 | 70 | 10 | 43 | 2 × 2 | — |
| #1097 | Tile 2 × 2 | 70 | 6 | 43 | 2 × 2 | — |
| #1098 | Tile 2 × 2 | 70 | 8 | 43 | 2 × 2 | — |
| #1099 | Tile 2 × 2 | 72 | 4 | 43 | 2 × 2 | — |
| #1101 | Tile 1 × 2 | 72 | 7 | 43 | 2 × 1 | — |
| #1102 | Tile 1 × 2 | 72 | 6 | 43 | 2 × 1 | — |
| #1103 | Tile 1 × 2 | 72 | 8 | 43 | 2 × 1 | — |
03 Roadway / STEP 107 OF 244
Road and walkways · layer 43 · 11/18
- Match the grey road tiles and white lane markings to the parts list. Keep the tower openings clear and build the railings outward from the road.
- Place these 24 pieces with their bottoms 43 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
2 × Tile 1 × 2
Dark stone grey · element 421105214 × Tile 2 × 2
Dark stone grey · element 42110558 × Plate 2 × 4
Bright red · element 302021
Dark stone grey · element 421105214 × Tile 2 × 2
Dark stone grey · element 42110558 × Plate 2 × 4
Bright red · element 302021
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #883 | Plate 2 × 4 | 72 | 12 | 43 | 4 × 2 | — |
| #884 | Plate 2 × 4 | 72 | 14 | 43 | 4 × 2 | — |
| #885 | Plate 2 × 4 | 76 | 0 | 43 | 4 × 2 | — |
| #886 | Plate 2 × 4 | 76 | 2 | 43 | 4 × 2 | — |
| #887 | Plate 2 × 4 | 76 | 12 | 43 | 4 × 2 | — |
| #888 | Plate 2 × 4 | 76 | 14 | 43 | 4 × 2 | — |
| #889 | Plate 2 × 4 | 80 | 0 | 43 | 4 × 2 | — |
| #890 | Plate 2 × 4 | 80 | 2 | 43 | 4 × 2 | — |
| #1100 | Tile 2 × 2 | 72 | 10 | 43 | 2 × 2 | — |
| #1104 | Tile 1 × 2 | 72 | 9 | 43 | 2 × 1 | — |
| #1105 | Tile 2 × 2 | 74 | 4 | 43 | 2 × 2 | — |
| #1106 | Tile 2 × 2 | 74 | 10 | 43 | 2 × 2 | — |
| #1107 | Tile 2 × 2 | 74 | 6 | 43 | 2 × 2 | — |
| #1108 | Tile 2 × 2 | 74 | 8 | 43 | 2 × 2 | — |
| #1109 | Tile 2 × 2 | 76 | 4 | 43 | 2 × 2 | — |
| #1110 | Tile 2 × 2 | 76 | 10 | 43 | 2 × 2 | — |
| #1111 | Tile 2 × 2 | 76 | 6 | 43 | 2 × 2 | — |
| #1112 | Tile 2 × 2 | 76 | 8 | 43 | 2 × 2 | — |
| #1113 | Tile 2 × 2 | 78 | 4 | 43 | 2 × 2 | — |
| #1114 | Tile 2 × 2 | 78 | 10 | 43 | 2 × 2 | — |
| #1115 | Tile 2 × 2 | 78 | 6 | 43 | 2 × 2 | — |
| #1116 | Tile 2 × 2 | 78 | 8 | 43 | 2 × 2 | — |
| #1117 | Tile 2 × 2 | 80 | 4 | 43 | 2 × 2 | — |
| #1120 | Tile 1 × 2 | 80 | 6 | 43 | 2 × 1 | — |
03 Roadway / STEP 108 OF 244
Road and walkways · layer 43 · 12/18
- Match the grey road tiles and white lane markings to the parts list. Keep the tower openings clear and build the railings outward from the road.
- Place these 24 pieces with their bottoms 43 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
2 × Tile 1 × 2
White · element 3069011 × Tile 1 × 2
Dark stone grey · element 421105213 × Tile 2 × 2
Dark stone grey · element 42110558 × Plate 2 × 4
Bright red · element 302021
White · element 3069011 × Tile 1 × 2
Dark stone grey · element 421105213 × Tile 2 × 2
Dark stone grey · element 42110558 × Plate 2 × 4
Bright red · element 302021
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #891 | Plate 2 × 4 | 80 | 12 | 43 | 4 × 2 | — |
| #892 | Plate 2 × 4 | 80 | 14 | 43 | 4 × 2 | — |
| #893 | Plate 2 × 4 | 84 | 0 | 43 | 4 × 2 | — |
| #894 | Plate 2 × 4 | 84 | 2 | 43 | 4 × 2 | — |
| #895 | Plate 2 × 4 | 84 | 12 | 43 | 4 × 2 | — |
| #896 | Plate 2 × 4 | 84 | 14 | 43 | 4 × 2 | — |
| #897 | Plate 2 × 4 | 88 | 0 | 43 | 4 × 2 | — |
| #898 | Plate 2 × 4 | 88 | 2 | 43 | 4 × 2 | — |
| #1118 | Tile 2 × 2 | 80 | 10 | 43 | 2 × 2 | — |
| #1119 | Tile 1 × 2 | 80 | 7 | 43 | 2 × 1 | — |
| #1121 | Tile 1 × 2 | 80 | 8 | 43 | 2 × 1 | — |
| #1122 | Tile 1 × 2 | 80 | 9 | 43 | 2 × 1 | — |
| #1123 | Tile 2 × 2 | 82 | 4 | 43 | 2 × 2 | — |
| #1124 | Tile 2 × 2 | 82 | 10 | 43 | 2 × 2 | — |
| #1125 | Tile 2 × 2 | 82 | 6 | 43 | 2 × 2 | — |
| #1126 | Tile 2 × 2 | 82 | 8 | 43 | 2 × 2 | — |
| #1127 | Tile 2 × 2 | 84 | 4 | 43 | 2 × 2 | — |
| #1128 | Tile 2 × 2 | 84 | 10 | 43 | 2 × 2 | — |
| #1129 | Tile 2 × 2 | 84 | 6 | 43 | 2 × 2 | — |
| #1130 | Tile 2 × 2 | 84 | 8 | 43 | 2 × 2 | — |
| #1131 | Tile 2 × 2 | 86 | 4 | 43 | 2 × 2 | — |
| #1132 | Tile 2 × 2 | 86 | 10 | 43 | 2 × 2 | — |
| #1133 | Tile 2 × 2 | 86 | 6 | 43 | 2 × 2 | — |
| #1134 | Tile 2 × 2 | 86 | 8 | 43 | 2 × 2 | — |
03 Roadway / STEP 109 OF 244
Road and walkways · layer 43 · 13/18
- Match the grey road tiles and white lane markings to the parts list. Keep the tower openings clear and build the railings outward from the road.
- Place these 24 pieces with their bottoms 43 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
14 × Tile 2 × 2
Dark stone grey · element 42110552 × Tile 1 × 2
Dark stone grey · element 42110522 × Tile 1 × 2
White · element 3069016 × Plate 2 × 4
Bright red · element 302021
Dark stone grey · element 42110552 × Tile 1 × 2
Dark stone grey · element 42110522 × Tile 1 × 2
White · element 3069016 × Plate 2 × 4
Bright red · element 302021
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #899 | Plate 2 × 4 | 88 | 12 | 43 | 4 × 2 | — |
| #900 | Plate 2 × 4 | 88 | 14 | 43 | 4 × 2 | — |
| #901 | Plate 2 × 4 | 92 | 0 | 43 | 4 × 2 | — |
| #902 | Plate 2 × 4 | 92 | 2 | 43 | 4 × 2 | — |
| #903 | Plate 2 × 4 | 92 | 12 | 43 | 4 × 2 | — |
| #904 | Plate 2 × 4 | 92 | 14 | 43 | 4 × 2 | — |
| #1135 | Tile 2 × 2 | 88 | 4 | 43 | 2 × 2 | — |
| #1136 | Tile 2 × 2 | 88 | 10 | 43 | 2 × 2 | — |
| #1137 | Tile 1 × 2 | 88 | 7 | 43 | 2 × 1 | — |
| #1138 | Tile 1 × 2 | 88 | 6 | 43 | 2 × 1 | — |
| #1139 | Tile 1 × 2 | 88 | 8 | 43 | 2 × 1 | — |
| #1140 | Tile 1 × 2 | 88 | 9 | 43 | 2 × 1 | — |
| #1141 | Tile 2 × 2 | 90 | 4 | 43 | 2 × 2 | — |
| #1142 | Tile 2 × 2 | 90 | 10 | 43 | 2 × 2 | — |
| #1143 | Tile 2 × 2 | 90 | 6 | 43 | 2 × 2 | — |
| #1144 | Tile 2 × 2 | 90 | 8 | 43 | 2 × 2 | — |
| #1145 | Tile 2 × 2 | 92 | 4 | 43 | 2 × 2 | — |
| #1146 | Tile 2 × 2 | 92 | 10 | 43 | 2 × 2 | — |
| #1147 | Tile 2 × 2 | 92 | 6 | 43 | 2 × 2 | — |
| #1148 | Tile 2 × 2 | 92 | 8 | 43 | 2 × 2 | — |
| #1149 | Tile 2 × 2 | 94 | 4 | 43 | 2 × 2 | — |
| #1150 | Tile 2 × 2 | 94 | 10 | 43 | 2 × 2 | — |
| #1151 | Tile 2 × 2 | 94 | 6 | 43 | 2 × 2 | — |
| #1152 | Tile 2 × 2 | 94 | 8 | 43 | 2 × 2 | — |
03 Roadway / STEP 110 OF 244
Road and walkways · layer 43 · 14/18
- Match the grey road tiles and white lane markings to the parts list. Keep the tower openings clear and build the railings outward from the road.
- Place these 24 pieces with their bottoms 43 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
8 × Plate 2 × 4
Bright red · element 30202112 × Tile 2 × 2
Dark stone grey · element 42110552 × Tile 1 × 2
Dark stone grey · element 42110522 × Tile 1 × 2
White · element 306901
Bright red · element 30202112 × Tile 2 × 2
Dark stone grey · element 42110552 × Tile 1 × 2
Dark stone grey · element 42110522 × Tile 1 × 2
White · element 306901
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #905 | Plate 2 × 4 | 96 | 0 | 43 | 4 × 2 | — |
| #906 | Plate 2 × 4 | 96 | 2 | 43 | 4 × 2 | — |
| #907 | Plate 2 × 4 | 96 | 12 | 43 | 4 × 2 | — |
| #908 | Plate 2 × 4 | 96 | 14 | 43 | 4 × 2 | — |
| #909 | Plate 2 × 4 | 100 | 0 | 43 | 4 × 2 | — |
| #910 | Plate 2 × 4 | 100 | 2 | 43 | 4 × 2 | — |
| #911 | Plate 2 × 4 | 100 | 12 | 43 | 4 × 2 | — |
| #912 | Plate 2 × 4 | 100 | 14 | 43 | 4 × 2 | — |
| #1153 | Tile 2 × 2 | 96 | 4 | 43 | 2 × 2 | — |
| #1154 | Tile 2 × 2 | 96 | 10 | 43 | 2 × 2 | — |
| #1155 | Tile 1 × 2 | 96 | 7 | 43 | 2 × 1 | — |
| #1156 | Tile 1 × 2 | 96 | 6 | 43 | 2 × 1 | — |
| #1157 | Tile 1 × 2 | 96 | 8 | 43 | 2 × 1 | — |
| #1158 | Tile 1 × 2 | 96 | 9 | 43 | 2 × 1 | — |
| #1159 | Tile 2 × 2 | 98 | 4 | 43 | 2 × 2 | — |
| #1160 | Tile 2 × 2 | 98 | 10 | 43 | 2 × 2 | — |
| #1161 | Tile 2 × 2 | 98 | 6 | 43 | 2 × 2 | — |
| #1162 | Tile 2 × 2 | 98 | 8 | 43 | 2 × 2 | — |
| #1163 | Tile 2 × 2 | 100 | 4 | 43 | 2 × 2 | — |
| #1164 | Tile 2 × 2 | 100 | 10 | 43 | 2 × 2 | — |
| #1165 | Tile 2 × 2 | 100 | 6 | 43 | 2 × 2 | — |
| #1166 | Tile 2 × 2 | 100 | 8 | 43 | 2 × 2 | — |
| #1167 | Tile 2 × 2 | 102 | 4 | 43 | 2 × 2 | — |
| #1169 | Tile 2 × 2 | 102 | 6 | 43 | 2 × 2 | — |
03 Roadway / STEP 111 OF 244
Road and walkways · layer 43 · 15/18
- Match the grey road tiles and white lane markings to the parts list. Keep the tower openings clear and build the railings outward from the road.
- Place these 24 pieces with their bottoms 43 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
12 × Tile 2 × 2
Dark stone grey · element 42110558 × Plate 2 × 4
Bright red · element 3020212 × Tile 1 × 2
Dark stone grey · element 42110522 × Tile 1 × 2
White · element 306901
Dark stone grey · element 42110558 × Plate 2 × 4
Bright red · element 3020212 × Tile 1 × 2
Dark stone grey · element 42110522 × Tile 1 × 2
White · element 306901
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #913 | Plate 2 × 4 | 104 | 0 | 43 | 4 × 2 | — |
| #914 | Plate 2 × 4 | 104 | 2 | 43 | 4 × 2 | — |
| #915 | Plate 2 × 4 | 104 | 12 | 43 | 4 × 2 | — |
| #916 | Plate 2 × 4 | 104 | 14 | 43 | 4 × 2 | — |
| #917 | Plate 2 × 4 | 108 | 0 | 43 | 4 × 2 | — |
| #918 | Plate 2 × 4 | 108 | 2 | 43 | 4 × 2 | — |
| #919 | Plate 2 × 4 | 108 | 12 | 43 | 4 × 2 | — |
| #920 | Plate 2 × 4 | 108 | 14 | 43 | 4 × 2 | — |
| #1168 | Tile 2 × 2 | 102 | 10 | 43 | 2 × 2 | — |
| #1170 | Tile 2 × 2 | 102 | 8 | 43 | 2 × 2 | — |
| #1171 | Tile 2 × 2 | 104 | 4 | 43 | 2 × 2 | — |
| #1172 | Tile 2 × 2 | 104 | 10 | 43 | 2 × 2 | — |
| #1173 | Tile 1 × 2 | 104 | 7 | 43 | 2 × 1 | — |
| #1174 | Tile 1 × 2 | 104 | 6 | 43 | 2 × 1 | — |
| #1175 | Tile 1 × 2 | 104 | 8 | 43 | 2 × 1 | — |
| #1176 | Tile 1 × 2 | 104 | 9 | 43 | 2 × 1 | — |
| #1177 | Tile 2 × 2 | 106 | 4 | 43 | 2 × 2 | — |
| #1178 | Tile 2 × 2 | 106 | 10 | 43 | 2 × 2 | — |
| #1179 | Tile 2 × 2 | 106 | 6 | 43 | 2 × 2 | — |
| #1180 | Tile 2 × 2 | 106 | 8 | 43 | 2 × 2 | — |
| #1181 | Tile 2 × 2 | 108 | 4 | 43 | 2 × 2 | — |
| #1182 | Tile 2 × 2 | 108 | 10 | 43 | 2 × 2 | — |
| #1183 | Tile 2 × 2 | 108 | 6 | 43 | 2 × 2 | — |
| #1184 | Tile 2 × 2 | 108 | 8 | 43 | 2 × 2 | — |
03 Roadway / STEP 112 OF 244
Road and walkways · layer 43 · 16/18
- Match the grey road tiles and white lane markings to the parts list. Keep the tower openings clear and build the railings outward from the road.
- Place these 24 pieces with their bottoms 43 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
14 × Tile 2 × 2
Dark stone grey · element 42110556 × Plate 2 × 4
Bright red · element 3020212 × Tile 1 × 2
Dark stone grey · element 42110522 × Tile 1 × 2
White · element 306901
Dark stone grey · element 42110556 × Plate 2 × 4
Bright red · element 3020212 × Tile 1 × 2
Dark stone grey · element 42110522 × Tile 1 × 2
White · element 306901
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #921 | Plate 2 × 4 | 112 | 0 | 43 | 4 × 2 | — |
| #922 | Plate 2 × 4 | 112 | 2 | 43 | 4 × 2 | — |
| #923 | Plate 2 × 4 | 112 | 12 | 43 | 4 × 2 | — |
| #924 | Plate 2 × 4 | 112 | 14 | 43 | 4 × 2 | — |
| #925 | Plate 2 × 4 | 116 | 0 | 43 | 4 × 2 | — |
| #926 | Plate 2 × 4 | 116 | 2 | 43 | 4 × 2 | — |
| #1185 | Tile 2 × 2 | 110 | 4 | 43 | 2 × 2 | — |
| #1186 | Tile 2 × 2 | 110 | 10 | 43 | 2 × 2 | — |
| #1187 | Tile 2 × 2 | 110 | 6 | 43 | 2 × 2 | — |
| #1188 | Tile 2 × 2 | 110 | 8 | 43 | 2 × 2 | — |
| #1189 | Tile 2 × 2 | 112 | 4 | 43 | 2 × 2 | — |
| #1190 | Tile 2 × 2 | 112 | 10 | 43 | 2 × 2 | — |
| #1191 | Tile 1 × 2 | 112 | 7 | 43 | 2 × 1 | — |
| #1192 | Tile 1 × 2 | 112 | 6 | 43 | 2 × 1 | — |
| #1193 | Tile 1 × 2 | 112 | 8 | 43 | 2 × 1 | — |
| #1194 | Tile 1 × 2 | 112 | 9 | 43 | 2 × 1 | — |
| #1195 | Tile 2 × 2 | 114 | 4 | 43 | 2 × 2 | — |
| #1196 | Tile 2 × 2 | 114 | 10 | 43 | 2 × 2 | — |
| #1197 | Tile 2 × 2 | 114 | 6 | 43 | 2 × 2 | — |
| #1198 | Tile 2 × 2 | 114 | 8 | 43 | 2 × 2 | — |
| #1199 | Tile 2 × 2 | 116 | 4 | 43 | 2 × 2 | — |
| #1200 | Tile 2 × 2 | 116 | 10 | 43 | 2 × 2 | — |
| #1201 | Tile 2 × 2 | 116 | 6 | 43 | 2 × 2 | — |
| #1202 | Tile 2 × 2 | 116 | 8 | 43 | 2 × 2 | — |
03 Roadway / STEP 113 OF 244
Road and walkways · layer 43 · 17/18
- Match the grey road tiles and white lane markings to the parts list. Keep the tower openings clear and build the railings outward from the road.
- Place these 24 pieces with their bottoms 43 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
8 × Plate 2 × 4
Bright red · element 30202112 × Tile 2 × 2
Dark stone grey · element 42110552 × Tile 1 × 2
Dark stone grey · element 42110522 × Tile 1 × 2
White · element 306901
Bright red · element 30202112 × Tile 2 × 2
Dark stone grey · element 42110552 × Tile 1 × 2
Dark stone grey · element 42110522 × Tile 1 × 2
White · element 306901
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #927 | Plate 2 × 4 | 116 | 12 | 43 | 4 × 2 | — |
| #928 | Plate 2 × 4 | 116 | 14 | 43 | 4 × 2 | — |
| #929 | Plate 2 × 4 | 120 | 0 | 43 | 4 × 2 | — |
| #930 | Plate 2 × 4 | 120 | 2 | 43 | 4 × 2 | — |
| #931 | Plate 2 × 4 | 120 | 12 | 43 | 4 × 2 | — |
| #932 | Plate 2 × 4 | 120 | 14 | 43 | 4 × 2 | — |
| #933 | Plate 2 × 4 | 124 | 0 | 43 | 4 × 2 | — |
| #934 | Plate 2 × 4 | 124 | 2 | 43 | 4 × 2 | — |
| #1203 | Tile 2 × 2 | 118 | 4 | 43 | 2 × 2 | — |
| #1204 | Tile 2 × 2 | 118 | 10 | 43 | 2 × 2 | — |
| #1205 | Tile 2 × 2 | 118 | 6 | 43 | 2 × 2 | — |
| #1206 | Tile 2 × 2 | 118 | 8 | 43 | 2 × 2 | — |
| #1207 | Tile 2 × 2 | 120 | 4 | 43 | 2 × 2 | — |
| #1208 | Tile 2 × 2 | 120 | 10 | 43 | 2 × 2 | — |
| #1209 | Tile 1 × 2 | 120 | 7 | 43 | 2 × 1 | — |
| #1210 | Tile 1 × 2 | 120 | 6 | 43 | 2 × 1 | — |
| #1211 | Tile 1 × 2 | 120 | 8 | 43 | 2 × 1 | — |
| #1212 | Tile 1 × 2 | 120 | 9 | 43 | 2 × 1 | — |
| #1213 | Tile 2 × 2 | 122 | 4 | 43 | 2 × 2 | — |
| #1214 | Tile 2 × 2 | 122 | 10 | 43 | 2 × 2 | — |
| #1215 | Tile 2 × 2 | 122 | 6 | 43 | 2 × 2 | — |
| #1216 | Tile 2 × 2 | 122 | 8 | 43 | 2 × 2 | — |
| #1217 | Tile 2 × 2 | 124 | 4 | 43 | 2 × 2 | — |
| #1219 | Tile 2 × 2 | 124 | 6 | 43 | 2 × 2 | — |
03 Roadway / STEP 114 OF 244
Road and walkways · layer 43 · 18/18
- Match the grey road tiles and white lane markings to the parts list. Keep the tower openings clear and build the railings outward from the road.
- Place these 8 pieces with their bottoms 43 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
6 × Tile 2 × 2
Dark stone grey · element 42110552 × Plate 2 × 4
Bright red · element 302021
Dark stone grey · element 42110552 × Plate 2 × 4
Bright red · element 302021
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #935 | Plate 2 × 4 | 124 | 12 | 43 | 4 × 2 | — |
| #936 | Plate 2 × 4 | 124 | 14 | 43 | 4 × 2 | — |
| #1218 | Tile 2 × 2 | 124 | 10 | 43 | 2 × 2 | — |
| #1220 | Tile 2 × 2 | 124 | 8 | 43 | 2 × 2 | — |
| #1221 | Tile 2 × 2 | 126 | 4 | 43 | 2 × 2 | — |
| #1222 | Tile 2 × 2 | 126 | 10 | 43 | 2 × 2 | — |
| #1223 | Tile 2 × 2 | 126 | 6 | 43 | 2 × 2 | — |
| #1224 | Tile 2 × 2 | 126 | 8 | 43 | 2 × 2 | — |
03 Roadway / STEP 115 OF 244
Road and walkways · layer 44 · 1/10
- Match the grey road tiles and white lane markings to the parts list. Keep the tower openings clear and build the railings outward from the road.
- Place these 24 pieces with their bottoms 44 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
- Handle bars face outward: near side at z = 0, far side at z = 15. Keep the exposed bars clear for the strings.
12 × Round brick 1 × 1
Bright red · element 3062216 × Plate 1 × 4
Bright red · element 3710216 × Plate 1 × 2 with handle
Bright red · element 4140585
Bright red · element 3062216 × Plate 1 × 4
Bright red · element 3710216 × Plate 1 × 2 with handle
Bright red · element 4140585
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1225 | Plate 1 × 2 with handle | 5 | 0 | 44 | 2 × 1 | Near side |
| #1228 | Plate 1 × 2 with handle | 9 | 0 | 44 | 2 × 1 | Near side |
| #1303 | Plate 1 × 2 with handle | 1 | 0 | 44 | 2 × 1 | Near side |
| #1309 | Round brick 1 × 1 | 0 | 0 | 44 | 1 × 1 | — |
| #1310 | Round brick 1 × 1 | 3 | 0 | 44 | 1 × 1 | — |
| #1312 | Round brick 1 × 1 | 4 | 0 | 44 | 1 × 1 | — |
| #1313 | Round brick 1 × 1 | 7 | 0 | 44 | 1 × 1 | — |
| #1315 | Round brick 1 × 1 | 8 | 0 | 44 | 1 × 1 | — |
| #1316 | Round brick 1 × 1 | 11 | 0 | 44 | 1 × 1 | — |
| #1393 | Plate 1 × 2 with handle | 5 | 15 | 44 | 2 × 1 | Far side |
| #1396 | Plate 1 × 2 with handle | 9 | 15 | 44 | 2 × 1 | Far side |
| #1471 | Plate 1 × 2 with handle | 1 | 15 | 44 | 2 × 1 | Far side |
| #1477 | Round brick 1 × 1 | 0 | 15 | 44 | 1 × 1 | — |
| #1478 | Round brick 1 × 1 | 3 | 15 | 44 | 1 × 1 | — |
| #1480 | Round brick 1 × 1 | 4 | 15 | 44 | 1 × 1 | — |
| #1481 | Round brick 1 × 1 | 7 | 15 | 44 | 1 × 1 | — |
| #1483 | Round brick 1 × 1 | 8 | 15 | 44 | 1 × 1 | — |
| #1484 | Round brick 1 × 1 | 11 | 15 | 44 | 1 × 1 | — |
| #1561 | Plate 1 × 4 | 0 | 3 | 44 | 4 × 1 | — |
| #1562 | Plate 1 × 4 | 4 | 3 | 44 | 4 × 1 | — |
| #1563 | Plate 1 × 4 | 8 | 3 | 44 | 4 × 1 | — |
| #1589 | Plate 1 × 4 | 0 | 12 | 44 | 4 × 1 | — |
| #1590 | Plate 1 × 4 | 4 | 12 | 44 | 4 × 1 | — |
| #1591 | Plate 1 × 4 | 8 | 12 | 44 | 4 × 1 | — |
03 Roadway / STEP 116 OF 244
Road and walkways · layer 44 · 2/10
- Match the grey road tiles and white lane markings to the parts list. Keep the tower openings clear and build the railings outward from the road.
- Place these 24 pieces with their bottoms 44 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
- Handle bars face outward: near side at z = 0, far side at z = 15. Keep the exposed bars clear for the strings.
12 × Round brick 1 × 1
Bright red · element 3062216 × Plate 1 × 4
Bright red · element 3710216 × Plate 1 × 2 with handle
Bright red · element 4140585
Bright red · element 3062216 × Plate 1 × 4
Bright red · element 3710216 × Plate 1 × 2 with handle
Bright red · element 4140585
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1231 | Plate 1 × 2 with handle | 13 | 0 | 44 | 2 × 1 | Near side |
| #1234 | Plate 1 × 2 with handle | 17 | 0 | 44 | 2 × 1 | Near side |
| #1237 | Plate 1 × 2 with handle | 21 | 0 | 44 | 2 × 1 | Near side |
| #1318 | Round brick 1 × 1 | 12 | 0 | 44 | 1 × 1 | — |
| #1319 | Round brick 1 × 1 | 15 | 0 | 44 | 1 × 1 | — |
| #1321 | Round brick 1 × 1 | 16 | 0 | 44 | 1 × 1 | — |
| #1322 | Round brick 1 × 1 | 19 | 0 | 44 | 1 × 1 | — |
| #1324 | Round brick 1 × 1 | 20 | 0 | 44 | 1 × 1 | — |
| #1325 | Round brick 1 × 1 | 23 | 0 | 44 | 1 × 1 | — |
| #1399 | Plate 1 × 2 with handle | 13 | 15 | 44 | 2 × 1 | Far side |
| #1402 | Plate 1 × 2 with handle | 17 | 15 | 44 | 2 × 1 | Far side |
| #1405 | Plate 1 × 2 with handle | 21 | 15 | 44 | 2 × 1 | Far side |
| #1486 | Round brick 1 × 1 | 12 | 15 | 44 | 1 × 1 | — |
| #1487 | Round brick 1 × 1 | 15 | 15 | 44 | 1 × 1 | — |
| #1489 | Round brick 1 × 1 | 16 | 15 | 44 | 1 × 1 | — |
| #1490 | Round brick 1 × 1 | 19 | 15 | 44 | 1 × 1 | — |
| #1492 | Round brick 1 × 1 | 20 | 15 | 44 | 1 × 1 | — |
| #1493 | Round brick 1 × 1 | 23 | 15 | 44 | 1 × 1 | — |
| #1564 | Plate 1 × 4 | 12 | 3 | 44 | 4 × 1 | — |
| #1565 | Plate 1 × 4 | 16 | 3 | 44 | 4 × 1 | — |
| #1566 | Plate 1 × 4 | 20 | 3 | 44 | 4 × 1 | — |
| #1592 | Plate 1 × 4 | 12 | 12 | 44 | 4 × 1 | — |
| #1593 | Plate 1 × 4 | 16 | 12 | 44 | 4 × 1 | — |
| #1594 | Plate 1 × 4 | 20 | 12 | 44 | 4 × 1 | — |
03 Roadway / STEP 117 OF 244
Road and walkways · layer 44 · 3/10
- Match the grey road tiles and white lane markings to the parts list. Keep the tower openings clear and build the railings outward from the road.
- Place these 24 pieces with their bottoms 44 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
- Handle bars face outward: near side at z = 0, far side at z = 15. Keep the exposed bars clear for the strings.
12 × Round brick 1 × 1
Bright red · element 3062216 × Plate 1 × 4
Bright red · element 3710216 × Plate 1 × 2 with handle
Bright red · element 4140585
Bright red · element 3062216 × Plate 1 × 4
Bright red · element 3710216 × Plate 1 × 2 with handle
Bright red · element 4140585
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1240 | Plate 1 × 2 with handle | 25 | 0 | 44 | 2 × 1 | Near side |
| #1243 | Plate 1 × 2 with handle | 37 | 0 | 44 | 2 × 1 | Near side |
| #1246 | Plate 1 × 2 with handle | 41 | 0 | 44 | 2 × 1 | Near side |
| #1327 | Round brick 1 × 1 | 24 | 0 | 44 | 1 × 1 | — |
| #1328 | Round brick 1 × 1 | 27 | 0 | 44 | 1 × 1 | — |
| #1330 | Round brick 1 × 1 | 36 | 0 | 44 | 1 × 1 | — |
| #1331 | Round brick 1 × 1 | 39 | 0 | 44 | 1 × 1 | — |
| #1333 | Round brick 1 × 1 | 40 | 0 | 44 | 1 × 1 | — |
| #1334 | Round brick 1 × 1 | 43 | 0 | 44 | 1 × 1 | — |
| #1408 | Plate 1 × 2 with handle | 25 | 15 | 44 | 2 × 1 | Far side |
| #1411 | Plate 1 × 2 with handle | 37 | 15 | 44 | 2 × 1 | Far side |
| #1414 | Plate 1 × 2 with handle | 41 | 15 | 44 | 2 × 1 | Far side |
| #1495 | Round brick 1 × 1 | 24 | 15 | 44 | 1 × 1 | — |
| #1496 | Round brick 1 × 1 | 27 | 15 | 44 | 1 × 1 | — |
| #1498 | Round brick 1 × 1 | 36 | 15 | 44 | 1 × 1 | — |
| #1499 | Round brick 1 × 1 | 39 | 15 | 44 | 1 × 1 | — |
| #1501 | Round brick 1 × 1 | 40 | 15 | 44 | 1 × 1 | — |
| #1502 | Round brick 1 × 1 | 43 | 15 | 44 | 1 × 1 | — |
| #1567 | Plate 1 × 4 | 24 | 3 | 44 | 4 × 1 | — |
| #1568 | Plate 1 × 4 | 36 | 3 | 44 | 4 × 1 | — |
| #1569 | Plate 1 × 4 | 40 | 3 | 44 | 4 × 1 | — |
| #1595 | Plate 1 × 4 | 24 | 12 | 44 | 4 × 1 | — |
| #1596 | Plate 1 × 4 | 36 | 12 | 44 | 4 × 1 | — |
| #1597 | Plate 1 × 4 | 40 | 12 | 44 | 4 × 1 | — |
03 Roadway / STEP 118 OF 244
Road and walkways · layer 44 · 4/10
- Match the grey road tiles and white lane markings to the parts list. Keep the tower openings clear and build the railings outward from the road.
- Place these 24 pieces with their bottoms 44 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
- Handle bars face outward: near side at z = 0, far side at z = 15. Keep the exposed bars clear for the strings.
12 × Round brick 1 × 1
Bright red · element 3062216 × Plate 1 × 4
Bright red · element 3710216 × Plate 1 × 2 with handle
Bright red · element 4140585
Bright red · element 3062216 × Plate 1 × 4
Bright red · element 3710216 × Plate 1 × 2 with handle
Bright red · element 4140585
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1249 | Plate 1 × 2 with handle | 45 | 0 | 44 | 2 × 1 | Near side |
| #1252 | Plate 1 × 2 with handle | 49 | 0 | 44 | 2 × 1 | Near side |
| #1255 | Plate 1 × 2 with handle | 53 | 0 | 44 | 2 × 1 | Near side |
| #1336 | Round brick 1 × 1 | 44 | 0 | 44 | 1 × 1 | — |
| #1337 | Round brick 1 × 1 | 47 | 0 | 44 | 1 × 1 | — |
| #1339 | Round brick 1 × 1 | 48 | 0 | 44 | 1 × 1 | — |
| #1340 | Round brick 1 × 1 | 51 | 0 | 44 | 1 × 1 | — |
| #1342 | Round brick 1 × 1 | 52 | 0 | 44 | 1 × 1 | — |
| #1343 | Round brick 1 × 1 | 55 | 0 | 44 | 1 × 1 | — |
| #1417 | Plate 1 × 2 with handle | 45 | 15 | 44 | 2 × 1 | Far side |
| #1420 | Plate 1 × 2 with handle | 49 | 15 | 44 | 2 × 1 | Far side |
| #1423 | Plate 1 × 2 with handle | 53 | 15 | 44 | 2 × 1 | Far side |
| #1504 | Round brick 1 × 1 | 44 | 15 | 44 | 1 × 1 | — |
| #1505 | Round brick 1 × 1 | 47 | 15 | 44 | 1 × 1 | — |
| #1507 | Round brick 1 × 1 | 48 | 15 | 44 | 1 × 1 | — |
| #1508 | Round brick 1 × 1 | 51 | 15 | 44 | 1 × 1 | — |
| #1510 | Round brick 1 × 1 | 52 | 15 | 44 | 1 × 1 | — |
| #1511 | Round brick 1 × 1 | 55 | 15 | 44 | 1 × 1 | — |
| #1570 | Plate 1 × 4 | 44 | 3 | 44 | 4 × 1 | — |
| #1571 | Plate 1 × 4 | 48 | 3 | 44 | 4 × 1 | — |
| #1572 | Plate 1 × 4 | 52 | 3 | 44 | 4 × 1 | — |
| #1598 | Plate 1 × 4 | 44 | 12 | 44 | 4 × 1 | — |
| #1599 | Plate 1 × 4 | 48 | 12 | 44 | 4 × 1 | — |
| #1600 | Plate 1 × 4 | 52 | 12 | 44 | 4 × 1 | — |
03 Roadway / STEP 119 OF 244
Road and walkways · layer 44 · 5/10
- Match the grey road tiles and white lane markings to the parts list. Keep the tower openings clear and build the railings outward from the road.
- Place these 24 pieces with their bottoms 44 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
- Handle bars face outward: near side at z = 0, far side at z = 15. Keep the exposed bars clear for the strings.
12 × Round brick 1 × 1
Bright red · element 3062216 × Plate 1 × 4
Bright red · element 3710216 × Plate 1 × 2 with handle
Bright red · element 4140585
Bright red · element 3062216 × Plate 1 × 4
Bright red · element 3710216 × Plate 1 × 2 with handle
Bright red · element 4140585
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1258 | Plate 1 × 2 with handle | 57 | 0 | 44 | 2 × 1 | Near side |
| #1261 | Plate 1 × 2 with handle | 61 | 0 | 44 | 2 × 1 | Near side |
| #1264 | Plate 1 × 2 with handle | 65 | 0 | 44 | 2 × 1 | Near side |
| #1345 | Round brick 1 × 1 | 56 | 0 | 44 | 1 × 1 | — |
| #1346 | Round brick 1 × 1 | 59 | 0 | 44 | 1 × 1 | — |
| #1348 | Round brick 1 × 1 | 60 | 0 | 44 | 1 × 1 | — |
| #1349 | Round brick 1 × 1 | 63 | 0 | 44 | 1 × 1 | — |
| #1351 | Round brick 1 × 1 | 64 | 0 | 44 | 1 × 1 | — |
| #1352 | Round brick 1 × 1 | 67 | 0 | 44 | 1 × 1 | — |
| #1426 | Plate 1 × 2 with handle | 57 | 15 | 44 | 2 × 1 | Far side |
| #1429 | Plate 1 × 2 with handle | 61 | 15 | 44 | 2 × 1 | Far side |
| #1432 | Plate 1 × 2 with handle | 65 | 15 | 44 | 2 × 1 | Far side |
| #1513 | Round brick 1 × 1 | 56 | 15 | 44 | 1 × 1 | — |
| #1514 | Round brick 1 × 1 | 59 | 15 | 44 | 1 × 1 | — |
| #1516 | Round brick 1 × 1 | 60 | 15 | 44 | 1 × 1 | — |
| #1517 | Round brick 1 × 1 | 63 | 15 | 44 | 1 × 1 | — |
| #1519 | Round brick 1 × 1 | 64 | 15 | 44 | 1 × 1 | — |
| #1520 | Round brick 1 × 1 | 67 | 15 | 44 | 1 × 1 | — |
| #1573 | Plate 1 × 4 | 56 | 3 | 44 | 4 × 1 | — |
| #1574 | Plate 1 × 4 | 60 | 3 | 44 | 4 × 1 | — |
| #1575 | Plate 1 × 4 | 64 | 3 | 44 | 4 × 1 | — |
| #1601 | Plate 1 × 4 | 56 | 12 | 44 | 4 × 1 | — |
| #1602 | Plate 1 × 4 | 60 | 12 | 44 | 4 × 1 | — |
| #1603 | Plate 1 × 4 | 64 | 12 | 44 | 4 × 1 | — |
03 Roadway / STEP 120 OF 244
Road and walkways · layer 44 · 6/10
- Match the grey road tiles and white lane markings to the parts list. Keep the tower openings clear and build the railings outward from the road.
- Place these 24 pieces with their bottoms 44 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
- Handle bars face outward: near side at z = 0, far side at z = 15. Keep the exposed bars clear for the strings.
12 × Round brick 1 × 1
Bright red · element 3062216 × Plate 1 × 4
Bright red · element 3710216 × Plate 1 × 2 with handle
Bright red · element 4140585
Bright red · element 3062216 × Plate 1 × 4
Bright red · element 3710216 × Plate 1 × 2 with handle
Bright red · element 4140585
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1267 | Plate 1 × 2 with handle | 69 | 0 | 44 | 2 × 1 | Near side |
| #1270 | Plate 1 × 2 with handle | 73 | 0 | 44 | 2 × 1 | Near side |
| #1273 | Plate 1 × 2 with handle | 77 | 0 | 44 | 2 × 1 | Near side |
| #1354 | Round brick 1 × 1 | 68 | 0 | 44 | 1 × 1 | — |
| #1355 | Round brick 1 × 1 | 71 | 0 | 44 | 1 × 1 | — |
| #1357 | Round brick 1 × 1 | 72 | 0 | 44 | 1 × 1 | — |
| #1358 | Round brick 1 × 1 | 75 | 0 | 44 | 1 × 1 | — |
| #1360 | Round brick 1 × 1 | 76 | 0 | 44 | 1 × 1 | — |
| #1361 | Round brick 1 × 1 | 79 | 0 | 44 | 1 × 1 | — |
| #1435 | Plate 1 × 2 with handle | 69 | 15 | 44 | 2 × 1 | Far side |
| #1438 | Plate 1 × 2 with handle | 73 | 15 | 44 | 2 × 1 | Far side |
| #1441 | Plate 1 × 2 with handle | 77 | 15 | 44 | 2 × 1 | Far side |
| #1522 | Round brick 1 × 1 | 68 | 15 | 44 | 1 × 1 | — |
| #1523 | Round brick 1 × 1 | 71 | 15 | 44 | 1 × 1 | — |
| #1525 | Round brick 1 × 1 | 72 | 15 | 44 | 1 × 1 | — |
| #1526 | Round brick 1 × 1 | 75 | 15 | 44 | 1 × 1 | — |
| #1528 | Round brick 1 × 1 | 76 | 15 | 44 | 1 × 1 | — |
| #1529 | Round brick 1 × 1 | 79 | 15 | 44 | 1 × 1 | — |
| #1576 | Plate 1 × 4 | 68 | 3 | 44 | 4 × 1 | — |
| #1577 | Plate 1 × 4 | 72 | 3 | 44 | 4 × 1 | — |
| #1578 | Plate 1 × 4 | 76 | 3 | 44 | 4 × 1 | — |
| #1604 | Plate 1 × 4 | 68 | 12 | 44 | 4 × 1 | — |
| #1605 | Plate 1 × 4 | 72 | 12 | 44 | 4 × 1 | — |
| #1606 | Plate 1 × 4 | 76 | 12 | 44 | 4 × 1 | — |
03 Roadway / STEP 121 OF 244
Road and walkways · layer 44 · 7/10
- Match the grey road tiles and white lane markings to the parts list. Keep the tower openings clear and build the railings outward from the road.
- Place these 24 pieces with their bottoms 44 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
- Handle bars face outward: near side at z = 0, far side at z = 15. Keep the exposed bars clear for the strings.
12 × Round brick 1 × 1
Bright red · element 3062216 × Plate 1 × 4
Bright red · element 3710216 × Plate 1 × 2 with handle
Bright red · element 4140585
Bright red · element 3062216 × Plate 1 × 4
Bright red · element 3710216 × Plate 1 × 2 with handle
Bright red · element 4140585
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1276 | Plate 1 × 2 with handle | 81 | 0 | 44 | 2 × 1 | Near side |
| #1279 | Plate 1 × 2 with handle | 85 | 0 | 44 | 2 × 1 | Near side |
| #1282 | Plate 1 × 2 with handle | 89 | 0 | 44 | 2 × 1 | Near side |
| #1363 | Round brick 1 × 1 | 80 | 0 | 44 | 1 × 1 | — |
| #1364 | Round brick 1 × 1 | 83 | 0 | 44 | 1 × 1 | — |
| #1366 | Round brick 1 × 1 | 84 | 0 | 44 | 1 × 1 | — |
| #1367 | Round brick 1 × 1 | 87 | 0 | 44 | 1 × 1 | — |
| #1369 | Round brick 1 × 1 | 88 | 0 | 44 | 1 × 1 | — |
| #1370 | Round brick 1 × 1 | 91 | 0 | 44 | 1 × 1 | — |
| #1444 | Plate 1 × 2 with handle | 81 | 15 | 44 | 2 × 1 | Far side |
| #1447 | Plate 1 × 2 with handle | 85 | 15 | 44 | 2 × 1 | Far side |
| #1450 | Plate 1 × 2 with handle | 89 | 15 | 44 | 2 × 1 | Far side |
| #1531 | Round brick 1 × 1 | 80 | 15 | 44 | 1 × 1 | — |
| #1532 | Round brick 1 × 1 | 83 | 15 | 44 | 1 × 1 | — |
| #1534 | Round brick 1 × 1 | 84 | 15 | 44 | 1 × 1 | — |
| #1535 | Round brick 1 × 1 | 87 | 15 | 44 | 1 × 1 | — |
| #1537 | Round brick 1 × 1 | 88 | 15 | 44 | 1 × 1 | — |
| #1538 | Round brick 1 × 1 | 91 | 15 | 44 | 1 × 1 | — |
| #1579 | Plate 1 × 4 | 80 | 3 | 44 | 4 × 1 | — |
| #1580 | Plate 1 × 4 | 84 | 3 | 44 | 4 × 1 | — |
| #1581 | Plate 1 × 4 | 88 | 3 | 44 | 4 × 1 | — |
| #1607 | Plate 1 × 4 | 80 | 12 | 44 | 4 × 1 | — |
| #1608 | Plate 1 × 4 | 84 | 12 | 44 | 4 × 1 | — |
| #1609 | Plate 1 × 4 | 88 | 12 | 44 | 4 × 1 | — |
03 Roadway / STEP 122 OF 244
Road and walkways · layer 44 · 8/10
- Match the grey road tiles and white lane markings to the parts list. Keep the tower openings clear and build the railings outward from the road.
- Place these 24 pieces with their bottoms 44 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
- Handle bars face outward: near side at z = 0, far side at z = 15. Keep the exposed bars clear for the strings.
12 × Round brick 1 × 1
Bright red · element 3062216 × Plate 1 × 4
Bright red · element 3710216 × Plate 1 × 2 with handle
Bright red · element 4140585
Bright red · element 3062216 × Plate 1 × 4
Bright red · element 3710216 × Plate 1 × 2 with handle
Bright red · element 4140585
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1285 | Plate 1 × 2 with handle | 101 | 0 | 44 | 2 × 1 | Near side |
| #1288 | Plate 1 × 2 with handle | 105 | 0 | 44 | 2 × 1 | Near side |
| #1291 | Plate 1 × 2 with handle | 109 | 0 | 44 | 2 × 1 | Near side |
| #1372 | Round brick 1 × 1 | 100 | 0 | 44 | 1 × 1 | — |
| #1373 | Round brick 1 × 1 | 103 | 0 | 44 | 1 × 1 | — |
| #1375 | Round brick 1 × 1 | 104 | 0 | 44 | 1 × 1 | — |
| #1376 | Round brick 1 × 1 | 107 | 0 | 44 | 1 × 1 | — |
| #1378 | Round brick 1 × 1 | 108 | 0 | 44 | 1 × 1 | — |
| #1379 | Round brick 1 × 1 | 111 | 0 | 44 | 1 × 1 | — |
| #1453 | Plate 1 × 2 with handle | 101 | 15 | 44 | 2 × 1 | Far side |
| #1456 | Plate 1 × 2 with handle | 105 | 15 | 44 | 2 × 1 | Far side |
| #1459 | Plate 1 × 2 with handle | 109 | 15 | 44 | 2 × 1 | Far side |
| #1540 | Round brick 1 × 1 | 100 | 15 | 44 | 1 × 1 | — |
| #1541 | Round brick 1 × 1 | 103 | 15 | 44 | 1 × 1 | — |
| #1543 | Round brick 1 × 1 | 104 | 15 | 44 | 1 × 1 | — |
| #1544 | Round brick 1 × 1 | 107 | 15 | 44 | 1 × 1 | — |
| #1546 | Round brick 1 × 1 | 108 | 15 | 44 | 1 × 1 | — |
| #1547 | Round brick 1 × 1 | 111 | 15 | 44 | 1 × 1 | — |
| #1582 | Plate 1 × 4 | 100 | 3 | 44 | 4 × 1 | — |
| #1583 | Plate 1 × 4 | 104 | 3 | 44 | 4 × 1 | — |
| #1584 | Plate 1 × 4 | 108 | 3 | 44 | 4 × 1 | — |
| #1610 | Plate 1 × 4 | 100 | 12 | 44 | 4 × 1 | — |
| #1611 | Plate 1 × 4 | 104 | 12 | 44 | 4 × 1 | — |
| #1612 | Plate 1 × 4 | 108 | 12 | 44 | 4 × 1 | — |
03 Roadway / STEP 123 OF 244
Road and walkways · layer 44 · 9/10
- Match the grey road tiles and white lane markings to the parts list. Keep the tower openings clear and build the railings outward from the road.
- Place these 24 pieces with their bottoms 44 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
- Handle bars face outward: near side at z = 0, far side at z = 15. Keep the exposed bars clear for the strings.
12 × Round brick 1 × 1
Bright red · element 3062216 × Plate 1 × 4
Bright red · element 3710216 × Plate 1 × 2 with handle
Bright red · element 4140585
Bright red · element 3062216 × Plate 1 × 4
Bright red · element 3710216 × Plate 1 × 2 with handle
Bright red · element 4140585
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1294 | Plate 1 × 2 with handle | 113 | 0 | 44 | 2 × 1 | Near side |
| #1297 | Plate 1 × 2 with handle | 117 | 0 | 44 | 2 × 1 | Near side |
| #1300 | Plate 1 × 2 with handle | 121 | 0 | 44 | 2 × 1 | Near side |
| #1381 | Round brick 1 × 1 | 112 | 0 | 44 | 1 × 1 | — |
| #1382 | Round brick 1 × 1 | 115 | 0 | 44 | 1 × 1 | — |
| #1384 | Round brick 1 × 1 | 116 | 0 | 44 | 1 × 1 | — |
| #1385 | Round brick 1 × 1 | 119 | 0 | 44 | 1 × 1 | — |
| #1387 | Round brick 1 × 1 | 120 | 0 | 44 | 1 × 1 | — |
| #1388 | Round brick 1 × 1 | 123 | 0 | 44 | 1 × 1 | — |
| #1462 | Plate 1 × 2 with handle | 113 | 15 | 44 | 2 × 1 | Far side |
| #1465 | Plate 1 × 2 with handle | 117 | 15 | 44 | 2 × 1 | Far side |
| #1468 | Plate 1 × 2 with handle | 121 | 15 | 44 | 2 × 1 | Far side |
| #1549 | Round brick 1 × 1 | 112 | 15 | 44 | 1 × 1 | — |
| #1550 | Round brick 1 × 1 | 115 | 15 | 44 | 1 × 1 | — |
| #1552 | Round brick 1 × 1 | 116 | 15 | 44 | 1 × 1 | — |
| #1553 | Round brick 1 × 1 | 119 | 15 | 44 | 1 × 1 | — |
| #1555 | Round brick 1 × 1 | 120 | 15 | 44 | 1 × 1 | — |
| #1556 | Round brick 1 × 1 | 123 | 15 | 44 | 1 × 1 | — |
| #1585 | Plate 1 × 4 | 112 | 3 | 44 | 4 × 1 | — |
| #1586 | Plate 1 × 4 | 116 | 3 | 44 | 4 × 1 | — |
| #1587 | Plate 1 × 4 | 120 | 3 | 44 | 4 × 1 | — |
| #1613 | Plate 1 × 4 | 112 | 12 | 44 | 4 × 1 | — |
| #1614 | Plate 1 × 4 | 116 | 12 | 44 | 4 × 1 | — |
| #1615 | Plate 1 × 4 | 120 | 12 | 44 | 4 × 1 | — |
03 Roadway / STEP 124 OF 244
Road and walkways · layer 44 · 10/10
- Match the grey road tiles and white lane markings to the parts list. Keep the tower openings clear and build the railings outward from the road.
- Place these 8 pieces with their bottoms 44 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
- Handle bars face outward: near side at z = 0, far side at z = 15. Keep the exposed bars clear for the strings.
4 × Round brick 1 × 1
Bright red · element 3062212 × Plate 1 × 4
Bright red · element 3710212 × Plate 1 × 2 with handle
Bright red · element 4140585
Bright red · element 3062212 × Plate 1 × 4
Bright red · element 3710212 × Plate 1 × 2 with handle
Bright red · element 4140585
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1306 | Plate 1 × 2 with handle | 125 | 0 | 44 | 2 × 1 | Near side |
| #1390 | Round brick 1 × 1 | 124 | 0 | 44 | 1 × 1 | — |
| #1391 | Round brick 1 × 1 | 127 | 0 | 44 | 1 × 1 | — |
| #1474 | Plate 1 × 2 with handle | 125 | 15 | 44 | 2 × 1 | Far side |
| #1558 | Round brick 1 × 1 | 124 | 15 | 44 | 1 × 1 | — |
| #1559 | Round brick 1 × 1 | 127 | 15 | 44 | 1 × 1 | — |
| #1588 | Plate 1 × 4 | 124 | 3 | 44 | 4 × 1 | — |
| #1616 | Plate 1 × 4 | 124 | 12 | 44 | 4 × 1 | — |
03 Roadway / STEP 125 OF 244
Road and walkways · layer 45 · 1/5
- Match the grey road tiles and white lane markings to the parts list. Keep the tower openings clear and build the railings outward from the road.
- Place these 24 pieces with their bottoms 45 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
24 × Plate 1 × 1
Bright red · element 302421
Bright red · element 302421
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1226 | Plate 1 × 1 | 5 | 0 | 45 | 1 × 1 | — |
| #1227 | Plate 1 × 1 | 6 | 0 | 45 | 1 × 1 | — |
| #1229 | Plate 1 × 1 | 9 | 0 | 45 | 1 × 1 | — |
| #1230 | Plate 1 × 1 | 10 | 0 | 45 | 1 × 1 | — |
| #1232 | Plate 1 × 1 | 13 | 0 | 45 | 1 × 1 | — |
| #1233 | Plate 1 × 1 | 14 | 0 | 45 | 1 × 1 | — |
| #1235 | Plate 1 × 1 | 17 | 0 | 45 | 1 × 1 | — |
| #1236 | Plate 1 × 1 | 18 | 0 | 45 | 1 × 1 | — |
| #1238 | Plate 1 × 1 | 21 | 0 | 45 | 1 × 1 | — |
| #1239 | Plate 1 × 1 | 22 | 0 | 45 | 1 × 1 | — |
| #1304 | Plate 1 × 1 | 1 | 0 | 45 | 1 × 1 | — |
| #1305 | Plate 1 × 1 | 2 | 0 | 45 | 1 × 1 | — |
| #1394 | Plate 1 × 1 | 5 | 15 | 45 | 1 × 1 | — |
| #1395 | Plate 1 × 1 | 6 | 15 | 45 | 1 × 1 | — |
| #1397 | Plate 1 × 1 | 9 | 15 | 45 | 1 × 1 | — |
| #1398 | Plate 1 × 1 | 10 | 15 | 45 | 1 × 1 | — |
| #1400 | Plate 1 × 1 | 13 | 15 | 45 | 1 × 1 | — |
| #1401 | Plate 1 × 1 | 14 | 15 | 45 | 1 × 1 | — |
| #1403 | Plate 1 × 1 | 17 | 15 | 45 | 1 × 1 | — |
| #1404 | Plate 1 × 1 | 18 | 15 | 45 | 1 × 1 | — |
| #1406 | Plate 1 × 1 | 21 | 15 | 45 | 1 × 1 | — |
| #1407 | Plate 1 × 1 | 22 | 15 | 45 | 1 × 1 | — |
| #1472 | Plate 1 × 1 | 1 | 15 | 45 | 1 × 1 | — |
| #1473 | Plate 1 × 1 | 2 | 15 | 45 | 1 × 1 | — |
03 Roadway / STEP 126 OF 244
Road and walkways · layer 45 · 2/5
- Match the grey road tiles and white lane markings to the parts list. Keep the tower openings clear and build the railings outward from the road.
- Place these 24 pieces with their bottoms 45 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
24 × Plate 1 × 1
Bright red · element 302421
Bright red · element 302421
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1241 | Plate 1 × 1 | 25 | 0 | 45 | 1 × 1 | — |
| #1242 | Plate 1 × 1 | 26 | 0 | 45 | 1 × 1 | — |
| #1244 | Plate 1 × 1 | 37 | 0 | 45 | 1 × 1 | — |
| #1245 | Plate 1 × 1 | 38 | 0 | 45 | 1 × 1 | — |
| #1247 | Plate 1 × 1 | 41 | 0 | 45 | 1 × 1 | — |
| #1248 | Plate 1 × 1 | 42 | 0 | 45 | 1 × 1 | — |
| #1250 | Plate 1 × 1 | 45 | 0 | 45 | 1 × 1 | — |
| #1251 | Plate 1 × 1 | 46 | 0 | 45 | 1 × 1 | — |
| #1253 | Plate 1 × 1 | 49 | 0 | 45 | 1 × 1 | — |
| #1254 | Plate 1 × 1 | 50 | 0 | 45 | 1 × 1 | — |
| #1256 | Plate 1 × 1 | 53 | 0 | 45 | 1 × 1 | — |
| #1257 | Plate 1 × 1 | 54 | 0 | 45 | 1 × 1 | — |
| #1409 | Plate 1 × 1 | 25 | 15 | 45 | 1 × 1 | — |
| #1410 | Plate 1 × 1 | 26 | 15 | 45 | 1 × 1 | — |
| #1412 | Plate 1 × 1 | 37 | 15 | 45 | 1 × 1 | — |
| #1413 | Plate 1 × 1 | 38 | 15 | 45 | 1 × 1 | — |
| #1415 | Plate 1 × 1 | 41 | 15 | 45 | 1 × 1 | — |
| #1416 | Plate 1 × 1 | 42 | 15 | 45 | 1 × 1 | — |
| #1418 | Plate 1 × 1 | 45 | 15 | 45 | 1 × 1 | — |
| #1419 | Plate 1 × 1 | 46 | 15 | 45 | 1 × 1 | — |
| #1421 | Plate 1 × 1 | 49 | 15 | 45 | 1 × 1 | — |
| #1422 | Plate 1 × 1 | 50 | 15 | 45 | 1 × 1 | — |
| #1424 | Plate 1 × 1 | 53 | 15 | 45 | 1 × 1 | — |
| #1425 | Plate 1 × 1 | 54 | 15 | 45 | 1 × 1 | — |
03 Roadway / STEP 127 OF 244
Road and walkways · layer 45 · 3/5
- Match the grey road tiles and white lane markings to the parts list. Keep the tower openings clear and build the railings outward from the road.
- Place these 24 pieces with their bottoms 45 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
24 × Plate 1 × 1
Bright red · element 302421
Bright red · element 302421
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1259 | Plate 1 × 1 | 57 | 0 | 45 | 1 × 1 | — |
| #1260 | Plate 1 × 1 | 58 | 0 | 45 | 1 × 1 | — |
| #1262 | Plate 1 × 1 | 61 | 0 | 45 | 1 × 1 | — |
| #1263 | Plate 1 × 1 | 62 | 0 | 45 | 1 × 1 | — |
| #1265 | Plate 1 × 1 | 65 | 0 | 45 | 1 × 1 | — |
| #1266 | Plate 1 × 1 | 66 | 0 | 45 | 1 × 1 | — |
| #1268 | Plate 1 × 1 | 69 | 0 | 45 | 1 × 1 | — |
| #1269 | Plate 1 × 1 | 70 | 0 | 45 | 1 × 1 | — |
| #1271 | Plate 1 × 1 | 73 | 0 | 45 | 1 × 1 | — |
| #1272 | Plate 1 × 1 | 74 | 0 | 45 | 1 × 1 | — |
| #1274 | Plate 1 × 1 | 77 | 0 | 45 | 1 × 1 | — |
| #1275 | Plate 1 × 1 | 78 | 0 | 45 | 1 × 1 | — |
| #1427 | Plate 1 × 1 | 57 | 15 | 45 | 1 × 1 | — |
| #1428 | Plate 1 × 1 | 58 | 15 | 45 | 1 × 1 | — |
| #1430 | Plate 1 × 1 | 61 | 15 | 45 | 1 × 1 | — |
| #1431 | Plate 1 × 1 | 62 | 15 | 45 | 1 × 1 | — |
| #1433 | Plate 1 × 1 | 65 | 15 | 45 | 1 × 1 | — |
| #1434 | Plate 1 × 1 | 66 | 15 | 45 | 1 × 1 | — |
| #1436 | Plate 1 × 1 | 69 | 15 | 45 | 1 × 1 | — |
| #1437 | Plate 1 × 1 | 70 | 15 | 45 | 1 × 1 | — |
| #1439 | Plate 1 × 1 | 73 | 15 | 45 | 1 × 1 | — |
| #1440 | Plate 1 × 1 | 74 | 15 | 45 | 1 × 1 | — |
| #1442 | Plate 1 × 1 | 77 | 15 | 45 | 1 × 1 | — |
| #1443 | Plate 1 × 1 | 78 | 15 | 45 | 1 × 1 | — |
03 Roadway / STEP 128 OF 244
Road and walkways · layer 45 · 4/5
- Match the grey road tiles and white lane markings to the parts list. Keep the tower openings clear and build the railings outward from the road.
- Place these 24 pieces with their bottoms 45 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
24 × Plate 1 × 1
Bright red · element 302421
Bright red · element 302421
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1277 | Plate 1 × 1 | 81 | 0 | 45 | 1 × 1 | — |
| #1278 | Plate 1 × 1 | 82 | 0 | 45 | 1 × 1 | — |
| #1280 | Plate 1 × 1 | 85 | 0 | 45 | 1 × 1 | — |
| #1281 | Plate 1 × 1 | 86 | 0 | 45 | 1 × 1 | — |
| #1283 | Plate 1 × 1 | 89 | 0 | 45 | 1 × 1 | — |
| #1284 | Plate 1 × 1 | 90 | 0 | 45 | 1 × 1 | — |
| #1286 | Plate 1 × 1 | 101 | 0 | 45 | 1 × 1 | — |
| #1287 | Plate 1 × 1 | 102 | 0 | 45 | 1 × 1 | — |
| #1289 | Plate 1 × 1 | 105 | 0 | 45 | 1 × 1 | — |
| #1290 | Plate 1 × 1 | 106 | 0 | 45 | 1 × 1 | — |
| #1292 | Plate 1 × 1 | 109 | 0 | 45 | 1 × 1 | — |
| #1293 | Plate 1 × 1 | 110 | 0 | 45 | 1 × 1 | — |
| #1445 | Plate 1 × 1 | 81 | 15 | 45 | 1 × 1 | — |
| #1446 | Plate 1 × 1 | 82 | 15 | 45 | 1 × 1 | — |
| #1448 | Plate 1 × 1 | 85 | 15 | 45 | 1 × 1 | — |
| #1449 | Plate 1 × 1 | 86 | 15 | 45 | 1 × 1 | — |
| #1451 | Plate 1 × 1 | 89 | 15 | 45 | 1 × 1 | — |
| #1452 | Plate 1 × 1 | 90 | 15 | 45 | 1 × 1 | — |
| #1454 | Plate 1 × 1 | 101 | 15 | 45 | 1 × 1 | — |
| #1455 | Plate 1 × 1 | 102 | 15 | 45 | 1 × 1 | — |
| #1457 | Plate 1 × 1 | 105 | 15 | 45 | 1 × 1 | — |
| #1458 | Plate 1 × 1 | 106 | 15 | 45 | 1 × 1 | — |
| #1460 | Plate 1 × 1 | 109 | 15 | 45 | 1 × 1 | — |
| #1461 | Plate 1 × 1 | 110 | 15 | 45 | 1 × 1 | — |
03 Roadway / STEP 129 OF 244
Road and walkways · layer 45 · 5/5
- Match the grey road tiles and white lane markings to the parts list. Keep the tower openings clear and build the railings outward from the road.
- Place these 16 pieces with their bottoms 45 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
16 × Plate 1 × 1
Bright red · element 302421
Bright red · element 302421
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1295 | Plate 1 × 1 | 113 | 0 | 45 | 1 × 1 | — |
| #1296 | Plate 1 × 1 | 114 | 0 | 45 | 1 × 1 | — |
| #1298 | Plate 1 × 1 | 117 | 0 | 45 | 1 × 1 | — |
| #1299 | Plate 1 × 1 | 118 | 0 | 45 | 1 × 1 | — |
| #1301 | Plate 1 × 1 | 121 | 0 | 45 | 1 × 1 | — |
| #1302 | Plate 1 × 1 | 122 | 0 | 45 | 1 × 1 | — |
| #1307 | Plate 1 × 1 | 125 | 0 | 45 | 1 × 1 | — |
| #1308 | Plate 1 × 1 | 126 | 0 | 45 | 1 × 1 | — |
| #1463 | Plate 1 × 1 | 113 | 15 | 45 | 1 × 1 | — |
| #1464 | Plate 1 × 1 | 114 | 15 | 45 | 1 × 1 | — |
| #1466 | Plate 1 × 1 | 117 | 15 | 45 | 1 × 1 | — |
| #1467 | Plate 1 × 1 | 118 | 15 | 45 | 1 × 1 | — |
| #1469 | Plate 1 × 1 | 121 | 15 | 45 | 1 × 1 | — |
| #1470 | Plate 1 × 1 | 122 | 15 | 45 | 1 × 1 | — |
| #1475 | Plate 1 × 1 | 125 | 15 | 45 | 1 × 1 | — |
| #1476 | Plate 1 × 1 | 126 | 15 | 45 | 1 × 1 | — |
03 Roadway / STEP 130 OF 244
Road and walkways · layer 47 · 1/3
- Match the grey road tiles and white lane markings to the parts list. Keep the tower openings clear and build the railings outward from the road.
- Place these 24 pieces with their bottoms 47 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
24 × Plate 1 × 4
Bright red · element 371021
Bright red · element 371021
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1311 | Plate 1 × 4 | 0 | 0 | 47 | 4 × 1 | — |
| #1314 | Plate 1 × 4 | 4 | 0 | 47 | 4 × 1 | — |
| #1317 | Plate 1 × 4 | 8 | 0 | 47 | 4 × 1 | — |
| #1320 | Plate 1 × 4 | 12 | 0 | 47 | 4 × 1 | — |
| #1323 | Plate 1 × 4 | 16 | 0 | 47 | 4 × 1 | — |
| #1326 | Plate 1 × 4 | 20 | 0 | 47 | 4 × 1 | — |
| #1329 | Plate 1 × 4 | 24 | 0 | 47 | 4 × 1 | — |
| #1332 | Plate 1 × 4 | 36 | 0 | 47 | 4 × 1 | — |
| #1335 | Plate 1 × 4 | 40 | 0 | 47 | 4 × 1 | — |
| #1338 | Plate 1 × 4 | 44 | 0 | 47 | 4 × 1 | — |
| #1341 | Plate 1 × 4 | 48 | 0 | 47 | 4 × 1 | — |
| #1344 | Plate 1 × 4 | 52 | 0 | 47 | 4 × 1 | — |
| #1479 | Plate 1 × 4 | 0 | 15 | 47 | 4 × 1 | — |
| #1482 | Plate 1 × 4 | 4 | 15 | 47 | 4 × 1 | — |
| #1485 | Plate 1 × 4 | 8 | 15 | 47 | 4 × 1 | — |
| #1488 | Plate 1 × 4 | 12 | 15 | 47 | 4 × 1 | — |
| #1491 | Plate 1 × 4 | 16 | 15 | 47 | 4 × 1 | — |
| #1494 | Plate 1 × 4 | 20 | 15 | 47 | 4 × 1 | — |
| #1497 | Plate 1 × 4 | 24 | 15 | 47 | 4 × 1 | — |
| #1500 | Plate 1 × 4 | 36 | 15 | 47 | 4 × 1 | — |
| #1503 | Plate 1 × 4 | 40 | 15 | 47 | 4 × 1 | — |
| #1506 | Plate 1 × 4 | 44 | 15 | 47 | 4 × 1 | — |
| #1509 | Plate 1 × 4 | 48 | 15 | 47 | 4 × 1 | — |
| #1512 | Plate 1 × 4 | 52 | 15 | 47 | 4 × 1 | — |
03 Roadway / STEP 131 OF 244
Road and walkways · layer 47 · 2/3
- Match the grey road tiles and white lane markings to the parts list. Keep the tower openings clear and build the railings outward from the road.
- Place these 24 pieces with their bottoms 47 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
24 × Plate 1 × 4
Bright red · element 371021
Bright red · element 371021
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1347 | Plate 1 × 4 | 56 | 0 | 47 | 4 × 1 | — |
| #1350 | Plate 1 × 4 | 60 | 0 | 47 | 4 × 1 | — |
| #1353 | Plate 1 × 4 | 64 | 0 | 47 | 4 × 1 | — |
| #1356 | Plate 1 × 4 | 68 | 0 | 47 | 4 × 1 | — |
| #1359 | Plate 1 × 4 | 72 | 0 | 47 | 4 × 1 | — |
| #1362 | Plate 1 × 4 | 76 | 0 | 47 | 4 × 1 | — |
| #1365 | Plate 1 × 4 | 80 | 0 | 47 | 4 × 1 | — |
| #1368 | Plate 1 × 4 | 84 | 0 | 47 | 4 × 1 | — |
| #1371 | Plate 1 × 4 | 88 | 0 | 47 | 4 × 1 | — |
| #1374 | Plate 1 × 4 | 100 | 0 | 47 | 4 × 1 | — |
| #1377 | Plate 1 × 4 | 104 | 0 | 47 | 4 × 1 | — |
| #1380 | Plate 1 × 4 | 108 | 0 | 47 | 4 × 1 | — |
| #1515 | Plate 1 × 4 | 56 | 15 | 47 | 4 × 1 | — |
| #1518 | Plate 1 × 4 | 60 | 15 | 47 | 4 × 1 | — |
| #1521 | Plate 1 × 4 | 64 | 15 | 47 | 4 × 1 | — |
| #1524 | Plate 1 × 4 | 68 | 15 | 47 | 4 × 1 | — |
| #1527 | Plate 1 × 4 | 72 | 15 | 47 | 4 × 1 | — |
| #1530 | Plate 1 × 4 | 76 | 15 | 47 | 4 × 1 | — |
| #1533 | Plate 1 × 4 | 80 | 15 | 47 | 4 × 1 | — |
| #1536 | Plate 1 × 4 | 84 | 15 | 47 | 4 × 1 | — |
| #1539 | Plate 1 × 4 | 88 | 15 | 47 | 4 × 1 | — |
| #1542 | Plate 1 × 4 | 100 | 15 | 47 | 4 × 1 | — |
| #1545 | Plate 1 × 4 | 104 | 15 | 47 | 4 × 1 | — |
| #1548 | Plate 1 × 4 | 108 | 15 | 47 | 4 × 1 | — |
03 Roadway / STEP 132 OF 244
Road and walkways · layer 47 · 3/3
- Match the grey road tiles and white lane markings to the parts list. Keep the tower openings clear and build the railings outward from the road.
- Place these 8 pieces with their bottoms 47 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
8 × Plate 1 × 4
Bright red · element 371021
Bright red · element 371021
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1383 | Plate 1 × 4 | 112 | 0 | 47 | 4 × 1 | — |
| #1386 | Plate 1 × 4 | 116 | 0 | 47 | 4 × 1 | — |
| #1389 | Plate 1 × 4 | 120 | 0 | 47 | 4 × 1 | — |
| #1392 | Plate 1 × 4 | 124 | 0 | 47 | 4 × 1 | — |
| #1551 | Plate 1 × 4 | 112 | 15 | 47 | 4 × 1 | — |
| #1554 | Plate 1 × 4 | 116 | 15 | 47 | 4 × 1 | — |
| #1557 | Plate 1 × 4 | 120 | 15 | 47 | 4 × 1 | — |
| #1560 | Plate 1 × 4 | 124 | 15 | 47 | 4 × 1 | — |
04 Towers / STEP 133 OF 244
Tower 1 · layer 44
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 8 pieces with their bottoms 44 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
8 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1617 | Brick 2 × 2 | 30 | 0 | 44 | 2 × 2 | — |
| #1618 | Brick 2 × 2 | 30 | 2 | 44 | 2 × 2 | — |
| #1619 | Brick 2 × 2 | 30 | 12 | 44 | 2 × 2 | — |
| #1620 | Brick 2 × 2 | 30 | 14 | 44 | 2 × 2 | — |
| #1621 | Brick 2 × 2 | 32 | 0 | 44 | 2 × 2 | — |
| #1622 | Brick 2 × 2 | 32 | 2 | 44 | 2 × 2 | — |
| #1623 | Brick 2 × 2 | 32 | 12 | 44 | 2 × 2 | — |
| #1624 | Brick 2 × 2 | 32 | 14 | 44 | 2 × 2 | — |
04 Towers / STEP 134 OF 244
Tower 1 · layer 47
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 8 pieces with their bottoms 47 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
8 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1625 | Brick 2 × 2 | 30 | 0 | 47 | 2 × 2 | — |
| #1626 | Brick 2 × 2 | 30 | 2 | 47 | 2 × 2 | — |
| #1627 | Brick 2 × 2 | 30 | 12 | 47 | 2 × 2 | — |
| #1628 | Brick 2 × 2 | 30 | 14 | 47 | 2 × 2 | — |
| #1629 | Brick 2 × 2 | 32 | 0 | 47 | 2 × 2 | — |
| #1630 | Brick 2 × 2 | 32 | 2 | 47 | 2 × 2 | — |
| #1631 | Brick 2 × 2 | 32 | 12 | 47 | 2 × 2 | — |
| #1632 | Brick 2 × 2 | 32 | 14 | 47 | 2 × 2 | — |
04 Towers / STEP 135 OF 244
Tower 1 · layer 50
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 8 pieces with their bottoms 50 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
8 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1633 | Brick 2 × 2 | 30 | 0 | 50 | 2 × 2 | — |
| #1634 | Brick 2 × 2 | 30 | 2 | 50 | 2 × 2 | — |
| #1635 | Brick 2 × 2 | 30 | 12 | 50 | 2 × 2 | — |
| #1636 | Brick 2 × 2 | 30 | 14 | 50 | 2 × 2 | — |
| #1637 | Brick 2 × 2 | 32 | 0 | 50 | 2 × 2 | — |
| #1638 | Brick 2 × 2 | 32 | 2 | 50 | 2 × 2 | — |
| #1639 | Brick 2 × 2 | 32 | 12 | 50 | 2 × 2 | — |
| #1640 | Brick 2 × 2 | 32 | 14 | 50 | 2 × 2 | — |
04 Towers / STEP 136 OF 244
Tower 1 · layer 53
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 8 pieces with their bottoms 53 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
8 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1641 | Brick 2 × 2 | 30 | 0 | 53 | 2 × 2 | — |
| #1642 | Brick 2 × 2 | 30 | 2 | 53 | 2 × 2 | — |
| #1643 | Brick 2 × 2 | 30 | 12 | 53 | 2 × 2 | — |
| #1644 | Brick 2 × 2 | 30 | 14 | 53 | 2 × 2 | — |
| #1645 | Brick 2 × 2 | 32 | 0 | 53 | 2 × 2 | — |
| #1646 | Brick 2 × 2 | 32 | 2 | 53 | 2 × 2 | — |
| #1647 | Brick 2 × 2 | 32 | 12 | 53 | 2 × 2 | — |
| #1648 | Brick 2 × 2 | 32 | 14 | 53 | 2 × 2 | — |
04 Towers / STEP 137 OF 244
Tower 1 · layer 56
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 8 pieces with their bottoms 56 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
8 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1649 | Brick 2 × 2 | 30 | 0 | 56 | 2 × 2 | — |
| #1650 | Brick 2 × 2 | 30 | 2 | 56 | 2 × 2 | — |
| #1651 | Brick 2 × 2 | 30 | 12 | 56 | 2 × 2 | — |
| #1652 | Brick 2 × 2 | 30 | 14 | 56 | 2 × 2 | — |
| #1653 | Brick 2 × 2 | 32 | 0 | 56 | 2 × 2 | — |
| #1654 | Brick 2 × 2 | 32 | 2 | 56 | 2 × 2 | — |
| #1655 | Brick 2 × 2 | 32 | 12 | 56 | 2 × 2 | — |
| #1656 | Brick 2 × 2 | 32 | 14 | 56 | 2 × 2 | — |
04 Towers / STEP 138 OF 244
Tower 1 · layer 59
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 8 pieces with their bottoms 59 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
8 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1657 | Brick 2 × 2 | 30 | 0 | 59 | 2 × 2 | — |
| #1658 | Brick 2 × 2 | 30 | 2 | 59 | 2 × 2 | — |
| #1659 | Brick 2 × 2 | 30 | 12 | 59 | 2 × 2 | — |
| #1660 | Brick 2 × 2 | 30 | 14 | 59 | 2 × 2 | — |
| #1661 | Brick 2 × 2 | 32 | 0 | 59 | 2 × 2 | — |
| #1662 | Brick 2 × 2 | 32 | 2 | 59 | 2 × 2 | — |
| #1663 | Brick 2 × 2 | 32 | 12 | 59 | 2 × 2 | — |
| #1664 | Brick 2 × 2 | 32 | 14 | 59 | 2 × 2 | — |
04 Towers / STEP 139 OF 244
Tower 1 · layer 62
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 4 pieces with their bottoms 62 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Plate 2 × 8
Bright red · element 303421
Bright red · element 303421
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1665 | Plate 2 × 8 | 30 | 0 | 62 | 2 × 8 | — |
| #1666 | Plate 2 × 8 | 30 | 8 | 62 | 2 × 8 | — |
| #1667 | Plate 2 × 8 | 32 | 0 | 62 | 2 × 8 | — |
| #1668 | Plate 2 × 8 | 32 | 8 | 62 | 2 × 8 | — |
04 Towers / STEP 140 OF 244
Tower 1 · layer 63
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 6 pieces with their bottoms 63 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Plate 2 × 4
Bright red · element 3020212 × Plate 2 × 8
Bright red · element 303421
Bright red · element 3020212 × Plate 2 × 8
Bright red · element 303421
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1669 | Plate 2 × 4 | 30 | 0 | 63 | 2 × 4 | — |
| #1670 | Plate 2 × 8 | 30 | 4 | 63 | 2 × 8 | — |
| #1671 | Plate 2 × 4 | 30 | 12 | 63 | 2 × 4 | — |
| #1672 | Plate 2 × 4 | 32 | 0 | 63 | 2 × 4 | — |
| #1673 | Plate 2 × 8 | 32 | 4 | 63 | 2 × 8 | — |
| #1674 | Plate 2 × 4 | 32 | 12 | 63 | 2 × 4 | — |
04 Towers / STEP 141 OF 244
Tower 1 · layer 64
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 8 pieces with their bottoms 64 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
8 × Plate 2 × 4
Bright red · element 302021
Bright red · element 302021
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1675 | Plate 2 × 4 | 30 | 0 | 64 | 4 × 2 | — |
| #1676 | Plate 2 × 4 | 30 | 2 | 64 | 4 × 2 | — |
| #1677 | Plate 2 × 4 | 30 | 4 | 64 | 4 × 2 | — |
| #1678 | Plate 2 × 4 | 30 | 6 | 64 | 4 × 2 | — |
| #1679 | Plate 2 × 4 | 30 | 8 | 64 | 4 × 2 | — |
| #1680 | Plate 2 × 4 | 30 | 10 | 64 | 4 × 2 | — |
| #1681 | Plate 2 × 4 | 30 | 12 | 64 | 4 × 2 | — |
| #1682 | Plate 2 × 4 | 30 | 14 | 64 | 4 × 2 | — |
04 Towers / STEP 142 OF 244
Tower 1 · layer 65
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 8 pieces with their bottoms 65 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
8 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1683 | Brick 2 × 2 | 30 | 0 | 65 | 2 × 2 | — |
| #1684 | Brick 2 × 2 | 30 | 2 | 65 | 2 × 2 | — |
| #1685 | Brick 2 × 2 | 30 | 12 | 65 | 2 × 2 | — |
| #1686 | Brick 2 × 2 | 30 | 14 | 65 | 2 × 2 | — |
| #1687 | Brick 2 × 2 | 32 | 0 | 65 | 2 × 2 | — |
| #1688 | Brick 2 × 2 | 32 | 2 | 65 | 2 × 2 | — |
| #1689 | Brick 2 × 2 | 32 | 12 | 65 | 2 × 2 | — |
| #1690 | Brick 2 × 2 | 32 | 14 | 65 | 2 × 2 | — |
04 Towers / STEP 143 OF 244
Tower 1 · layer 68
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 8 pieces with their bottoms 68 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
8 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1691 | Brick 2 × 2 | 30 | 0 | 68 | 2 × 2 | — |
| #1692 | Brick 2 × 2 | 30 | 2 | 68 | 2 × 2 | — |
| #1693 | Brick 2 × 2 | 30 | 12 | 68 | 2 × 2 | — |
| #1694 | Brick 2 × 2 | 30 | 14 | 68 | 2 × 2 | — |
| #1695 | Brick 2 × 2 | 32 | 0 | 68 | 2 × 2 | — |
| #1696 | Brick 2 × 2 | 32 | 2 | 68 | 2 × 2 | — |
| #1697 | Brick 2 × 2 | 32 | 12 | 68 | 2 × 2 | — |
| #1698 | Brick 2 × 2 | 32 | 14 | 68 | 2 × 2 | — |
04 Towers / STEP 144 OF 244
Tower 1 · layer 71
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 8 pieces with their bottoms 71 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
8 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1699 | Brick 2 × 2 | 30 | 0 | 71 | 2 × 2 | — |
| #1700 | Brick 2 × 2 | 30 | 2 | 71 | 2 × 2 | — |
| #1701 | Brick 2 × 2 | 30 | 12 | 71 | 2 × 2 | — |
| #1702 | Brick 2 × 2 | 30 | 14 | 71 | 2 × 2 | — |
| #1703 | Brick 2 × 2 | 32 | 0 | 71 | 2 × 2 | — |
| #1704 | Brick 2 × 2 | 32 | 2 | 71 | 2 × 2 | — |
| #1705 | Brick 2 × 2 | 32 | 12 | 71 | 2 × 2 | — |
| #1706 | Brick 2 × 2 | 32 | 14 | 71 | 2 × 2 | — |
04 Towers / STEP 145 OF 244
Tower 1 · layer 74
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 4 pieces with their bottoms 74 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1707 | Brick 2 × 2 | 31 | 0 | 74 | 2 × 2 | — |
| #1708 | Brick 2 × 2 | 31 | 2 | 74 | 2 × 2 | — |
| #1709 | Brick 2 × 2 | 31 | 12 | 74 | 2 × 2 | — |
| #1710 | Brick 2 × 2 | 31 | 14 | 74 | 2 × 2 | — |
04 Towers / STEP 146 OF 244
Tower 1 · layer 77
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 4 pieces with their bottoms 77 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1711 | Brick 2 × 2 | 31 | 0 | 77 | 2 × 2 | — |
| #1712 | Brick 2 × 2 | 31 | 2 | 77 | 2 × 2 | — |
| #1713 | Brick 2 × 2 | 31 | 12 | 77 | 2 × 2 | — |
| #1714 | Brick 2 × 2 | 31 | 14 | 77 | 2 × 2 | — |
04 Towers / STEP 147 OF 244
Tower 1 · layer 80
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 4 pieces with their bottoms 80 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1715 | Brick 2 × 2 | 31 | 0 | 80 | 2 × 2 | — |
| #1716 | Brick 2 × 2 | 31 | 2 | 80 | 2 × 2 | — |
| #1717 | Brick 2 × 2 | 31 | 12 | 80 | 2 × 2 | — |
| #1718 | Brick 2 × 2 | 31 | 14 | 80 | 2 × 2 | — |
04 Towers / STEP 148 OF 244
Tower 1 · layer 83
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 4 pieces with their bottoms 83 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Plate 2 × 8
Bright red · element 303421
Bright red · element 303421
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1719 | Plate 2 × 8 | 30 | 0 | 83 | 2 × 8 | — |
| #1720 | Plate 2 × 8 | 30 | 8 | 83 | 2 × 8 | — |
| #1721 | Plate 2 × 8 | 32 | 0 | 83 | 2 × 8 | — |
| #1722 | Plate 2 × 8 | 32 | 8 | 83 | 2 × 8 | — |
04 Towers / STEP 149 OF 244
Tower 1 · layer 84
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 6 pieces with their bottoms 84 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Plate 2 × 4
Bright red · element 3020212 × Plate 2 × 8
Bright red · element 303421
Bright red · element 3020212 × Plate 2 × 8
Bright red · element 303421
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1723 | Plate 2 × 4 | 30 | 0 | 84 | 2 × 4 | — |
| #1724 | Plate 2 × 8 | 30 | 4 | 84 | 2 × 8 | — |
| #1725 | Plate 2 × 4 | 30 | 12 | 84 | 2 × 4 | — |
| #1726 | Plate 2 × 4 | 32 | 0 | 84 | 2 × 4 | — |
| #1727 | Plate 2 × 8 | 32 | 4 | 84 | 2 × 8 | — |
| #1728 | Plate 2 × 4 | 32 | 12 | 84 | 2 × 4 | — |
04 Towers / STEP 150 OF 244
Tower 1 · layer 85
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 8 pieces with their bottoms 85 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
8 × Plate 2 × 4
Bright red · element 302021
Bright red · element 302021
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1729 | Plate 2 × 4 | 30 | 0 | 85 | 4 × 2 | — |
| #1730 | Plate 2 × 4 | 30 | 2 | 85 | 4 × 2 | — |
| #1731 | Plate 2 × 4 | 30 | 4 | 85 | 4 × 2 | — |
| #1732 | Plate 2 × 4 | 30 | 6 | 85 | 4 × 2 | — |
| #1733 | Plate 2 × 4 | 30 | 8 | 85 | 4 × 2 | — |
| #1734 | Plate 2 × 4 | 30 | 10 | 85 | 4 × 2 | — |
| #1735 | Plate 2 × 4 | 30 | 12 | 85 | 4 × 2 | — |
| #1736 | Plate 2 × 4 | 30 | 14 | 85 | 4 × 2 | — |
04 Towers / STEP 151 OF 244
Tower 1 · layer 86
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 4 pieces with their bottoms 86 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1737 | Brick 2 × 2 | 31 | 0 | 86 | 2 × 2 | — |
| #1738 | Brick 2 × 2 | 31 | 2 | 86 | 2 × 2 | — |
| #1739 | Brick 2 × 2 | 31 | 12 | 86 | 2 × 2 | — |
| #1740 | Brick 2 × 2 | 31 | 14 | 86 | 2 × 2 | — |
04 Towers / STEP 152 OF 244
Tower 1 · layer 89
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 4 pieces with their bottoms 89 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1741 | Brick 2 × 2 | 31 | 0 | 89 | 2 × 2 | — |
| #1742 | Brick 2 × 2 | 31 | 2 | 89 | 2 × 2 | — |
| #1743 | Brick 2 × 2 | 31 | 12 | 89 | 2 × 2 | — |
| #1744 | Brick 2 × 2 | 31 | 14 | 89 | 2 × 2 | — |
04 Towers / STEP 153 OF 244
Tower 1 · layer 92
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 4 pieces with their bottoms 92 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1745 | Brick 2 × 2 | 31 | 0 | 92 | 2 × 2 | — |
| #1746 | Brick 2 × 2 | 31 | 2 | 92 | 2 × 2 | — |
| #1747 | Brick 2 × 2 | 31 | 12 | 92 | 2 × 2 | — |
| #1748 | Brick 2 × 2 | 31 | 14 | 92 | 2 × 2 | — |
04 Towers / STEP 154 OF 244
Tower 1 · layer 95
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 4 pieces with their bottoms 95 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1749 | Brick 2 × 2 | 31 | 0 | 95 | 2 × 2 | — |
| #1750 | Brick 2 × 2 | 31 | 2 | 95 | 2 × 2 | — |
| #1751 | Brick 2 × 2 | 31 | 12 | 95 | 2 × 2 | — |
| #1752 | Brick 2 × 2 | 31 | 14 | 95 | 2 × 2 | — |
04 Towers / STEP 155 OF 244
Tower 1 · layer 98
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 4 pieces with their bottoms 98 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1753 | Brick 2 × 2 | 31 | 0 | 98 | 2 × 2 | — |
| #1754 | Brick 2 × 2 | 31 | 2 | 98 | 2 × 2 | — |
| #1755 | Brick 2 × 2 | 31 | 12 | 98 | 2 × 2 | — |
| #1756 | Brick 2 × 2 | 31 | 14 | 98 | 2 × 2 | — |
04 Towers / STEP 156 OF 244
Tower 1 · layer 101
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 4 pieces with their bottoms 101 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1757 | Brick 2 × 2 | 31 | 0 | 101 | 2 × 2 | — |
| #1758 | Brick 2 × 2 | 31 | 2 | 101 | 2 × 2 | — |
| #1759 | Brick 2 × 2 | 31 | 12 | 101 | 2 × 2 | — |
| #1760 | Brick 2 × 2 | 31 | 14 | 101 | 2 × 2 | — |
04 Towers / STEP 157 OF 244
Tower 1 · layer 104
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 4 pieces with their bottoms 104 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1761 | Brick 2 × 2 | 31 | 0 | 104 | 2 × 2 | — |
| #1762 | Brick 2 × 2 | 31 | 2 | 104 | 2 × 2 | — |
| #1763 | Brick 2 × 2 | 31 | 12 | 104 | 2 × 2 | — |
| #1764 | Brick 2 × 2 | 31 | 14 | 104 | 2 × 2 | — |
04 Towers / STEP 158 OF 244
Tower 1 · layer 107
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 4 pieces with their bottoms 107 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Plate 2 × 8
Bright red · element 303421
Bright red · element 303421
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1765 | Plate 2 × 8 | 30 | 0 | 107 | 2 × 8 | — |
| #1766 | Plate 2 × 8 | 30 | 8 | 107 | 2 × 8 | — |
| #1767 | Plate 2 × 8 | 32 | 0 | 107 | 2 × 8 | — |
| #1768 | Plate 2 × 8 | 32 | 8 | 107 | 2 × 8 | — |
04 Towers / STEP 159 OF 244
Tower 1 · layer 108
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 6 pieces with their bottoms 108 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Plate 2 × 4
Bright red · element 3020212 × Plate 2 × 8
Bright red · element 303421
Bright red · element 3020212 × Plate 2 × 8
Bright red · element 303421
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1769 | Plate 2 × 4 | 30 | 0 | 108 | 2 × 4 | — |
| #1770 | Plate 2 × 8 | 30 | 4 | 108 | 2 × 8 | — |
| #1771 | Plate 2 × 4 | 30 | 12 | 108 | 2 × 4 | — |
| #1772 | Plate 2 × 4 | 32 | 0 | 108 | 2 × 4 | — |
| #1773 | Plate 2 × 8 | 32 | 4 | 108 | 2 × 8 | — |
| #1774 | Plate 2 × 4 | 32 | 12 | 108 | 2 × 4 | — |
04 Towers / STEP 160 OF 244
Tower 1 · layer 109
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 8 pieces with their bottoms 109 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
8 × Plate 2 × 4
Bright red · element 302021
Bright red · element 302021
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1775 | Plate 2 × 4 | 30 | 0 | 109 | 4 × 2 | — |
| #1776 | Plate 2 × 4 | 30 | 2 | 109 | 4 × 2 | — |
| #1777 | Plate 2 × 4 | 30 | 4 | 109 | 4 × 2 | — |
| #1778 | Plate 2 × 4 | 30 | 6 | 109 | 4 × 2 | — |
| #1779 | Plate 2 × 4 | 30 | 8 | 109 | 4 × 2 | — |
| #1780 | Plate 2 × 4 | 30 | 10 | 109 | 4 × 2 | — |
| #1781 | Plate 2 × 4 | 30 | 12 | 109 | 4 × 2 | — |
| #1782 | Plate 2 × 4 | 30 | 14 | 109 | 4 × 2 | — |
04 Towers / STEP 161 OF 244
Tower 1 · layer 110
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 4 pieces with their bottoms 110 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1783 | Brick 2 × 2 | 31 | 0 | 110 | 2 × 2 | — |
| #1784 | Brick 2 × 2 | 31 | 2 | 110 | 2 × 2 | — |
| #1785 | Brick 2 × 2 | 31 | 12 | 110 | 2 × 2 | — |
| #1786 | Brick 2 × 2 | 31 | 14 | 110 | 2 × 2 | — |
04 Towers / STEP 162 OF 244
Tower 1 · layer 113
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 4 pieces with their bottoms 113 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1787 | Brick 2 × 2 | 31 | 0 | 113 | 2 × 2 | — |
| #1788 | Brick 2 × 2 | 31 | 2 | 113 | 2 × 2 | — |
| #1789 | Brick 2 × 2 | 31 | 12 | 113 | 2 × 2 | — |
| #1790 | Brick 2 × 2 | 31 | 14 | 113 | 2 × 2 | — |
04 Towers / STEP 163 OF 244
Tower 1 · layer 116
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 4 pieces with their bottoms 116 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1791 | Brick 2 × 2 | 31 | 0 | 116 | 2 × 2 | — |
| #1792 | Brick 2 × 2 | 31 | 2 | 116 | 2 × 2 | — |
| #1793 | Brick 2 × 2 | 31 | 12 | 116 | 2 × 2 | — |
| #1794 | Brick 2 × 2 | 31 | 14 | 116 | 2 × 2 | — |
04 Towers / STEP 164 OF 244
Tower 1 · layer 119
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 4 pieces with their bottoms 119 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1795 | Brick 2 × 2 | 31 | 0 | 119 | 2 × 2 | — |
| #1796 | Brick 2 × 2 | 31 | 2 | 119 | 2 × 2 | — |
| #1797 | Brick 2 × 2 | 31 | 12 | 119 | 2 × 2 | — |
| #1798 | Brick 2 × 2 | 31 | 14 | 119 | 2 × 2 | — |
04 Towers / STEP 165 OF 244
Tower 1 · layer 122
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 4 pieces with their bottoms 122 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1799 | Brick 2 × 2 | 31 | 0 | 122 | 2 × 2 | — |
| #1800 | Brick 2 × 2 | 31 | 2 | 122 | 2 × 2 | — |
| #1801 | Brick 2 × 2 | 31 | 12 | 122 | 2 × 2 | — |
| #1802 | Brick 2 × 2 | 31 | 14 | 122 | 2 × 2 | — |
04 Towers / STEP 166 OF 244
Tower 1 · layer 125
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 4 pieces with their bottoms 125 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1803 | Brick 2 × 2 | 31 | 0 | 125 | 2 × 2 | — |
| #1804 | Brick 2 × 2 | 31 | 2 | 125 | 2 × 2 | — |
| #1805 | Brick 2 × 2 | 31 | 12 | 125 | 2 × 2 | — |
| #1806 | Brick 2 × 2 | 31 | 14 | 125 | 2 × 2 | — |
04 Towers / STEP 167 OF 244
Tower 1 · layer 128
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 4 pieces with their bottoms 128 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1807 | Brick 2 × 2 | 31 | 0 | 128 | 2 × 2 | — |
| #1808 | Brick 2 × 2 | 31 | 2 | 128 | 2 × 2 | — |
| #1809 | Brick 2 × 2 | 31 | 12 | 128 | 2 × 2 | — |
| #1810 | Brick 2 × 2 | 31 | 14 | 128 | 2 × 2 | — |
04 Towers / STEP 168 OF 244
Tower 1 · layer 131
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 4 pieces with their bottoms 131 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Plate 2 × 8
Bright red · element 303421
Bright red · element 303421
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1811 | Plate 2 × 8 | 30 | 0 | 131 | 2 × 8 | — |
| #1812 | Plate 2 × 8 | 30 | 8 | 131 | 2 × 8 | — |
| #1813 | Plate 2 × 8 | 32 | 0 | 131 | 2 × 8 | — |
| #1814 | Plate 2 × 8 | 32 | 8 | 131 | 2 × 8 | — |
04 Towers / STEP 169 OF 244
Tower 1 · layer 132
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 6 pieces with their bottoms 132 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Plate 2 × 4
Bright red · element 3020212 × Plate 2 × 8
Bright red · element 303421
Bright red · element 3020212 × Plate 2 × 8
Bright red · element 303421
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1815 | Plate 2 × 4 | 30 | 0 | 132 | 2 × 4 | — |
| #1816 | Plate 2 × 8 | 30 | 4 | 132 | 2 × 8 | — |
| #1817 | Plate 2 × 4 | 30 | 12 | 132 | 2 × 4 | — |
| #1818 | Plate 2 × 4 | 32 | 0 | 132 | 2 × 4 | — |
| #1819 | Plate 2 × 8 | 32 | 4 | 132 | 2 × 8 | — |
| #1820 | Plate 2 × 4 | 32 | 12 | 132 | 2 × 4 | — |
04 Towers / STEP 170 OF 244
Tower 1 · layer 133
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 8 pieces with their bottoms 133 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
8 × Plate 2 × 4
Bright red · element 302021
Bright red · element 302021
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1821 | Plate 2 × 4 | 30 | 0 | 133 | 4 × 2 | — |
| #1822 | Plate 2 × 4 | 30 | 2 | 133 | 4 × 2 | — |
| #1823 | Plate 2 × 4 | 30 | 4 | 133 | 4 × 2 | — |
| #1824 | Plate 2 × 4 | 30 | 6 | 133 | 4 × 2 | — |
| #1825 | Plate 2 × 4 | 30 | 8 | 133 | 4 × 2 | — |
| #1826 | Plate 2 × 4 | 30 | 10 | 133 | 4 × 2 | — |
| #1827 | Plate 2 × 4 | 30 | 12 | 133 | 4 × 2 | — |
| #1828 | Plate 2 × 4 | 30 | 14 | 133 | 4 × 2 | — |
04 Towers / STEP 171 OF 244
Tower 1 · layer 134
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 4 pieces with their bottoms 134 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
- Handle bars face outward: near side at z = 0, far side at z = 15. Keep the exposed bars clear for the strings.
2 × Plate 2 × 4
Bright red · element 3020212 × Plate 1 × 2 with handle
Bright red · element 4140585
Bright red · element 3020212 × Plate 1 × 2 with handle
Bright red · element 4140585
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1829 | Plate 1 × 2 with handle | 31 | 0 | 134 | 2 × 1 | Near side |
| #1832 | Plate 1 × 2 with handle | 31 | 15 | 134 | 2 × 1 | Far side |
| #1835 | Plate 2 × 4 | 30 | 1 | 134 | 4 × 2 | — |
| #1838 | Plate 2 × 4 | 30 | 13 | 134 | 4 × 2 | — |
04 Towers / STEP 172 OF 244
Tower 1 · layer 135
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 4 pieces with their bottoms 135 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
2 × Plate 1 × 4
Bright red · element 3710212 × Brick 2 × 2
Bright red · element 300321
Bright red · element 3710212 × Brick 2 × 2
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1830 | Plate 1 × 4 | 30 | 0 | 135 | 4 × 1 | — |
| #1833 | Plate 1 × 4 | 30 | 15 | 135 | 4 × 1 | — |
| #1836 | Brick 2 × 2 | 31 | 1 | 135 | 2 × 2 | — |
| #1839 | Brick 2 × 2 | 31 | 13 | 135 | 2 × 2 | — |
04 Towers / STEP 173 OF 244
Tower 1 · layer 136
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 2 pieces with their bottoms 136 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
2 × Plate 1 × 4
Bright red · element 371021
Bright red · element 371021
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1831 | Plate 1 × 4 | 30 | 0 | 136 | 4 × 1 | — |
| #1834 | Plate 1 × 4 | 30 | 15 | 136 | 4 × 1 | — |
04 Towers / STEP 174 OF 244
Tower 1 · layer 138
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 2 pieces with their bottoms 138 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
2 × Plate 2 × 4
Bright red · element 302021
Bright red · element 302021
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1837 | Plate 2 × 4 | 30 | 1 | 138 | 4 × 2 | — |
| #1840 | Plate 2 × 4 | 30 | 13 | 138 | 4 × 2 | — |
04 Towers / STEP 175 OF 244
Tower 2 · layer 44
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 8 pieces with their bottoms 44 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
8 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1841 | Brick 2 × 2 | 94 | 0 | 44 | 2 × 2 | — |
| #1842 | Brick 2 × 2 | 94 | 2 | 44 | 2 × 2 | — |
| #1843 | Brick 2 × 2 | 94 | 12 | 44 | 2 × 2 | — |
| #1844 | Brick 2 × 2 | 94 | 14 | 44 | 2 × 2 | — |
| #1845 | Brick 2 × 2 | 96 | 0 | 44 | 2 × 2 | — |
| #1846 | Brick 2 × 2 | 96 | 2 | 44 | 2 × 2 | — |
| #1847 | Brick 2 × 2 | 96 | 12 | 44 | 2 × 2 | — |
| #1848 | Brick 2 × 2 | 96 | 14 | 44 | 2 × 2 | — |
04 Towers / STEP 176 OF 244
Tower 2 · layer 47
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 8 pieces with their bottoms 47 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
8 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1849 | Brick 2 × 2 | 94 | 0 | 47 | 2 × 2 | — |
| #1850 | Brick 2 × 2 | 94 | 2 | 47 | 2 × 2 | — |
| #1851 | Brick 2 × 2 | 94 | 12 | 47 | 2 × 2 | — |
| #1852 | Brick 2 × 2 | 94 | 14 | 47 | 2 × 2 | — |
| #1853 | Brick 2 × 2 | 96 | 0 | 47 | 2 × 2 | — |
| #1854 | Brick 2 × 2 | 96 | 2 | 47 | 2 × 2 | — |
| #1855 | Brick 2 × 2 | 96 | 12 | 47 | 2 × 2 | — |
| #1856 | Brick 2 × 2 | 96 | 14 | 47 | 2 × 2 | — |
04 Towers / STEP 177 OF 244
Tower 2 · layer 50
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 8 pieces with their bottoms 50 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
8 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1857 | Brick 2 × 2 | 94 | 0 | 50 | 2 × 2 | — |
| #1858 | Brick 2 × 2 | 94 | 2 | 50 | 2 × 2 | — |
| #1859 | Brick 2 × 2 | 94 | 12 | 50 | 2 × 2 | — |
| #1860 | Brick 2 × 2 | 94 | 14 | 50 | 2 × 2 | — |
| #1861 | Brick 2 × 2 | 96 | 0 | 50 | 2 × 2 | — |
| #1862 | Brick 2 × 2 | 96 | 2 | 50 | 2 × 2 | — |
| #1863 | Brick 2 × 2 | 96 | 12 | 50 | 2 × 2 | — |
| #1864 | Brick 2 × 2 | 96 | 14 | 50 | 2 × 2 | — |
04 Towers / STEP 178 OF 244
Tower 2 · layer 53
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 8 pieces with their bottoms 53 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
8 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1865 | Brick 2 × 2 | 94 | 0 | 53 | 2 × 2 | — |
| #1866 | Brick 2 × 2 | 94 | 2 | 53 | 2 × 2 | — |
| #1867 | Brick 2 × 2 | 94 | 12 | 53 | 2 × 2 | — |
| #1868 | Brick 2 × 2 | 94 | 14 | 53 | 2 × 2 | — |
| #1869 | Brick 2 × 2 | 96 | 0 | 53 | 2 × 2 | — |
| #1870 | Brick 2 × 2 | 96 | 2 | 53 | 2 × 2 | — |
| #1871 | Brick 2 × 2 | 96 | 12 | 53 | 2 × 2 | — |
| #1872 | Brick 2 × 2 | 96 | 14 | 53 | 2 × 2 | — |
04 Towers / STEP 179 OF 244
Tower 2 · layer 56
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 8 pieces with their bottoms 56 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
8 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1873 | Brick 2 × 2 | 94 | 0 | 56 | 2 × 2 | — |
| #1874 | Brick 2 × 2 | 94 | 2 | 56 | 2 × 2 | — |
| #1875 | Brick 2 × 2 | 94 | 12 | 56 | 2 × 2 | — |
| #1876 | Brick 2 × 2 | 94 | 14 | 56 | 2 × 2 | — |
| #1877 | Brick 2 × 2 | 96 | 0 | 56 | 2 × 2 | — |
| #1878 | Brick 2 × 2 | 96 | 2 | 56 | 2 × 2 | — |
| #1879 | Brick 2 × 2 | 96 | 12 | 56 | 2 × 2 | — |
| #1880 | Brick 2 × 2 | 96 | 14 | 56 | 2 × 2 | — |
04 Towers / STEP 180 OF 244
Tower 2 · layer 59
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 8 pieces with their bottoms 59 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
8 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1881 | Brick 2 × 2 | 94 | 0 | 59 | 2 × 2 | — |
| #1882 | Brick 2 × 2 | 94 | 2 | 59 | 2 × 2 | — |
| #1883 | Brick 2 × 2 | 94 | 12 | 59 | 2 × 2 | — |
| #1884 | Brick 2 × 2 | 94 | 14 | 59 | 2 × 2 | — |
| #1885 | Brick 2 × 2 | 96 | 0 | 59 | 2 × 2 | — |
| #1886 | Brick 2 × 2 | 96 | 2 | 59 | 2 × 2 | — |
| #1887 | Brick 2 × 2 | 96 | 12 | 59 | 2 × 2 | — |
| #1888 | Brick 2 × 2 | 96 | 14 | 59 | 2 × 2 | — |
04 Towers / STEP 181 OF 244
Tower 2 · layer 62
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 4 pieces with their bottoms 62 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Plate 2 × 8
Bright red · element 303421
Bright red · element 303421
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1889 | Plate 2 × 8 | 94 | 0 | 62 | 2 × 8 | — |
| #1890 | Plate 2 × 8 | 94 | 8 | 62 | 2 × 8 | — |
| #1891 | Plate 2 × 8 | 96 | 0 | 62 | 2 × 8 | — |
| #1892 | Plate 2 × 8 | 96 | 8 | 62 | 2 × 8 | — |
04 Towers / STEP 182 OF 244
Tower 2 · layer 63
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 6 pieces with their bottoms 63 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Plate 2 × 4
Bright red · element 3020212 × Plate 2 × 8
Bright red · element 303421
Bright red · element 3020212 × Plate 2 × 8
Bright red · element 303421
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1893 | Plate 2 × 4 | 94 | 0 | 63 | 2 × 4 | — |
| #1894 | Plate 2 × 8 | 94 | 4 | 63 | 2 × 8 | — |
| #1895 | Plate 2 × 4 | 94 | 12 | 63 | 2 × 4 | — |
| #1896 | Plate 2 × 4 | 96 | 0 | 63 | 2 × 4 | — |
| #1897 | Plate 2 × 8 | 96 | 4 | 63 | 2 × 8 | — |
| #1898 | Plate 2 × 4 | 96 | 12 | 63 | 2 × 4 | — |
04 Towers / STEP 183 OF 244
Tower 2 · layer 64
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 8 pieces with their bottoms 64 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
8 × Plate 2 × 4
Bright red · element 302021
Bright red · element 302021
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1899 | Plate 2 × 4 | 94 | 0 | 64 | 4 × 2 | — |
| #1900 | Plate 2 × 4 | 94 | 2 | 64 | 4 × 2 | — |
| #1901 | Plate 2 × 4 | 94 | 4 | 64 | 4 × 2 | — |
| #1902 | Plate 2 × 4 | 94 | 6 | 64 | 4 × 2 | — |
| #1903 | Plate 2 × 4 | 94 | 8 | 64 | 4 × 2 | — |
| #1904 | Plate 2 × 4 | 94 | 10 | 64 | 4 × 2 | — |
| #1905 | Plate 2 × 4 | 94 | 12 | 64 | 4 × 2 | — |
| #1906 | Plate 2 × 4 | 94 | 14 | 64 | 4 × 2 | — |
04 Towers / STEP 184 OF 244
Tower 2 · layer 65
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 8 pieces with their bottoms 65 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
8 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1907 | Brick 2 × 2 | 94 | 0 | 65 | 2 × 2 | — |
| #1908 | Brick 2 × 2 | 94 | 2 | 65 | 2 × 2 | — |
| #1909 | Brick 2 × 2 | 94 | 12 | 65 | 2 × 2 | — |
| #1910 | Brick 2 × 2 | 94 | 14 | 65 | 2 × 2 | — |
| #1911 | Brick 2 × 2 | 96 | 0 | 65 | 2 × 2 | — |
| #1912 | Brick 2 × 2 | 96 | 2 | 65 | 2 × 2 | — |
| #1913 | Brick 2 × 2 | 96 | 12 | 65 | 2 × 2 | — |
| #1914 | Brick 2 × 2 | 96 | 14 | 65 | 2 × 2 | — |
04 Towers / STEP 185 OF 244
Tower 2 · layer 68
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 8 pieces with their bottoms 68 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
8 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1915 | Brick 2 × 2 | 94 | 0 | 68 | 2 × 2 | — |
| #1916 | Brick 2 × 2 | 94 | 2 | 68 | 2 × 2 | — |
| #1917 | Brick 2 × 2 | 94 | 12 | 68 | 2 × 2 | — |
| #1918 | Brick 2 × 2 | 94 | 14 | 68 | 2 × 2 | — |
| #1919 | Brick 2 × 2 | 96 | 0 | 68 | 2 × 2 | — |
| #1920 | Brick 2 × 2 | 96 | 2 | 68 | 2 × 2 | — |
| #1921 | Brick 2 × 2 | 96 | 12 | 68 | 2 × 2 | — |
| #1922 | Brick 2 × 2 | 96 | 14 | 68 | 2 × 2 | — |
04 Towers / STEP 186 OF 244
Tower 2 · layer 71
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 8 pieces with their bottoms 71 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
8 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1923 | Brick 2 × 2 | 94 | 0 | 71 | 2 × 2 | — |
| #1924 | Brick 2 × 2 | 94 | 2 | 71 | 2 × 2 | — |
| #1925 | Brick 2 × 2 | 94 | 12 | 71 | 2 × 2 | — |
| #1926 | Brick 2 × 2 | 94 | 14 | 71 | 2 × 2 | — |
| #1927 | Brick 2 × 2 | 96 | 0 | 71 | 2 × 2 | — |
| #1928 | Brick 2 × 2 | 96 | 2 | 71 | 2 × 2 | — |
| #1929 | Brick 2 × 2 | 96 | 12 | 71 | 2 × 2 | — |
| #1930 | Brick 2 × 2 | 96 | 14 | 71 | 2 × 2 | — |
04 Towers / STEP 187 OF 244
Tower 2 · layer 74
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 4 pieces with their bottoms 74 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1931 | Brick 2 × 2 | 95 | 0 | 74 | 2 × 2 | — |
| #1932 | Brick 2 × 2 | 95 | 2 | 74 | 2 × 2 | — |
| #1933 | Brick 2 × 2 | 95 | 12 | 74 | 2 × 2 | — |
| #1934 | Brick 2 × 2 | 95 | 14 | 74 | 2 × 2 | — |
04 Towers / STEP 188 OF 244
Tower 2 · layer 77
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 4 pieces with their bottoms 77 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1935 | Brick 2 × 2 | 95 | 0 | 77 | 2 × 2 | — |
| #1936 | Brick 2 × 2 | 95 | 2 | 77 | 2 × 2 | — |
| #1937 | Brick 2 × 2 | 95 | 12 | 77 | 2 × 2 | — |
| #1938 | Brick 2 × 2 | 95 | 14 | 77 | 2 × 2 | — |
04 Towers / STEP 189 OF 244
Tower 2 · layer 80
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 4 pieces with their bottoms 80 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1939 | Brick 2 × 2 | 95 | 0 | 80 | 2 × 2 | — |
| #1940 | Brick 2 × 2 | 95 | 2 | 80 | 2 × 2 | — |
| #1941 | Brick 2 × 2 | 95 | 12 | 80 | 2 × 2 | — |
| #1942 | Brick 2 × 2 | 95 | 14 | 80 | 2 × 2 | — |
04 Towers / STEP 190 OF 244
Tower 2 · layer 83
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 4 pieces with their bottoms 83 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Plate 2 × 8
Bright red · element 303421
Bright red · element 303421
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1943 | Plate 2 × 8 | 94 | 0 | 83 | 2 × 8 | — |
| #1944 | Plate 2 × 8 | 94 | 8 | 83 | 2 × 8 | — |
| #1945 | Plate 2 × 8 | 96 | 0 | 83 | 2 × 8 | — |
| #1946 | Plate 2 × 8 | 96 | 8 | 83 | 2 × 8 | — |
04 Towers / STEP 191 OF 244
Tower 2 · layer 84
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 6 pieces with their bottoms 84 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Plate 2 × 4
Bright red · element 3020212 × Plate 2 × 8
Bright red · element 303421
Bright red · element 3020212 × Plate 2 × 8
Bright red · element 303421
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1947 | Plate 2 × 4 | 94 | 0 | 84 | 2 × 4 | — |
| #1948 | Plate 2 × 8 | 94 | 4 | 84 | 2 × 8 | — |
| #1949 | Plate 2 × 4 | 94 | 12 | 84 | 2 × 4 | — |
| #1950 | Plate 2 × 4 | 96 | 0 | 84 | 2 × 4 | — |
| #1951 | Plate 2 × 8 | 96 | 4 | 84 | 2 × 8 | — |
| #1952 | Plate 2 × 4 | 96 | 12 | 84 | 2 × 4 | — |
04 Towers / STEP 192 OF 244
Tower 2 · layer 85
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 8 pieces with their bottoms 85 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
8 × Plate 2 × 4
Bright red · element 302021
Bright red · element 302021
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1953 | Plate 2 × 4 | 94 | 0 | 85 | 4 × 2 | — |
| #1954 | Plate 2 × 4 | 94 | 2 | 85 | 4 × 2 | — |
| #1955 | Plate 2 × 4 | 94 | 4 | 85 | 4 × 2 | — |
| #1956 | Plate 2 × 4 | 94 | 6 | 85 | 4 × 2 | — |
| #1957 | Plate 2 × 4 | 94 | 8 | 85 | 4 × 2 | — |
| #1958 | Plate 2 × 4 | 94 | 10 | 85 | 4 × 2 | — |
| #1959 | Plate 2 × 4 | 94 | 12 | 85 | 4 × 2 | — |
| #1960 | Plate 2 × 4 | 94 | 14 | 85 | 4 × 2 | — |
04 Towers / STEP 193 OF 244
Tower 2 · layer 86
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 4 pieces with their bottoms 86 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1961 | Brick 2 × 2 | 95 | 0 | 86 | 2 × 2 | — |
| #1962 | Brick 2 × 2 | 95 | 2 | 86 | 2 × 2 | — |
| #1963 | Brick 2 × 2 | 95 | 12 | 86 | 2 × 2 | — |
| #1964 | Brick 2 × 2 | 95 | 14 | 86 | 2 × 2 | — |
04 Towers / STEP 194 OF 244
Tower 2 · layer 89
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 4 pieces with their bottoms 89 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1965 | Brick 2 × 2 | 95 | 0 | 89 | 2 × 2 | — |
| #1966 | Brick 2 × 2 | 95 | 2 | 89 | 2 × 2 | — |
| #1967 | Brick 2 × 2 | 95 | 12 | 89 | 2 × 2 | — |
| #1968 | Brick 2 × 2 | 95 | 14 | 89 | 2 × 2 | — |
04 Towers / STEP 195 OF 244
Tower 2 · layer 92
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 4 pieces with their bottoms 92 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1969 | Brick 2 × 2 | 95 | 0 | 92 | 2 × 2 | — |
| #1970 | Brick 2 × 2 | 95 | 2 | 92 | 2 × 2 | — |
| #1971 | Brick 2 × 2 | 95 | 12 | 92 | 2 × 2 | — |
| #1972 | Brick 2 × 2 | 95 | 14 | 92 | 2 × 2 | — |
04 Towers / STEP 196 OF 244
Tower 2 · layer 95
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 4 pieces with their bottoms 95 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1973 | Brick 2 × 2 | 95 | 0 | 95 | 2 × 2 | — |
| #1974 | Brick 2 × 2 | 95 | 2 | 95 | 2 × 2 | — |
| #1975 | Brick 2 × 2 | 95 | 12 | 95 | 2 × 2 | — |
| #1976 | Brick 2 × 2 | 95 | 14 | 95 | 2 × 2 | — |
04 Towers / STEP 197 OF 244
Tower 2 · layer 98
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 4 pieces with their bottoms 98 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1977 | Brick 2 × 2 | 95 | 0 | 98 | 2 × 2 | — |
| #1978 | Brick 2 × 2 | 95 | 2 | 98 | 2 × 2 | — |
| #1979 | Brick 2 × 2 | 95 | 12 | 98 | 2 × 2 | — |
| #1980 | Brick 2 × 2 | 95 | 14 | 98 | 2 × 2 | — |
04 Towers / STEP 198 OF 244
Tower 2 · layer 101
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 4 pieces with their bottoms 101 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1981 | Brick 2 × 2 | 95 | 0 | 101 | 2 × 2 | — |
| #1982 | Brick 2 × 2 | 95 | 2 | 101 | 2 × 2 | — |
| #1983 | Brick 2 × 2 | 95 | 12 | 101 | 2 × 2 | — |
| #1984 | Brick 2 × 2 | 95 | 14 | 101 | 2 × 2 | — |
04 Towers / STEP 199 OF 244
Tower 2 · layer 104
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 4 pieces with their bottoms 104 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1985 | Brick 2 × 2 | 95 | 0 | 104 | 2 × 2 | — |
| #1986 | Brick 2 × 2 | 95 | 2 | 104 | 2 × 2 | — |
| #1987 | Brick 2 × 2 | 95 | 12 | 104 | 2 × 2 | — |
| #1988 | Brick 2 × 2 | 95 | 14 | 104 | 2 × 2 | — |
04 Towers / STEP 200 OF 244
Tower 2 · layer 107
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 4 pieces with their bottoms 107 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Plate 2 × 8
Bright red · element 303421
Bright red · element 303421
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1989 | Plate 2 × 8 | 94 | 0 | 107 | 2 × 8 | — |
| #1990 | Plate 2 × 8 | 94 | 8 | 107 | 2 × 8 | — |
| #1991 | Plate 2 × 8 | 96 | 0 | 107 | 2 × 8 | — |
| #1992 | Plate 2 × 8 | 96 | 8 | 107 | 2 × 8 | — |
04 Towers / STEP 201 OF 244
Tower 2 · layer 108
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 6 pieces with their bottoms 108 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Plate 2 × 4
Bright red · element 3020212 × Plate 2 × 8
Bright red · element 303421
Bright red · element 3020212 × Plate 2 × 8
Bright red · element 303421
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1993 | Plate 2 × 4 | 94 | 0 | 108 | 2 × 4 | — |
| #1994 | Plate 2 × 8 | 94 | 4 | 108 | 2 × 8 | — |
| #1995 | Plate 2 × 4 | 94 | 12 | 108 | 2 × 4 | — |
| #1996 | Plate 2 × 4 | 96 | 0 | 108 | 2 × 4 | — |
| #1997 | Plate 2 × 8 | 96 | 4 | 108 | 2 × 8 | — |
| #1998 | Plate 2 × 4 | 96 | 12 | 108 | 2 × 4 | — |
04 Towers / STEP 202 OF 244
Tower 2 · layer 109
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 8 pieces with their bottoms 109 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
8 × Plate 2 × 4
Bright red · element 302021
Bright red · element 302021
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #1999 | Plate 2 × 4 | 94 | 0 | 109 | 4 × 2 | — |
| #2000 | Plate 2 × 4 | 94 | 2 | 109 | 4 × 2 | — |
| #2001 | Plate 2 × 4 | 94 | 4 | 109 | 4 × 2 | — |
| #2002 | Plate 2 × 4 | 94 | 6 | 109 | 4 × 2 | — |
| #2003 | Plate 2 × 4 | 94 | 8 | 109 | 4 × 2 | — |
| #2004 | Plate 2 × 4 | 94 | 10 | 109 | 4 × 2 | — |
| #2005 | Plate 2 × 4 | 94 | 12 | 109 | 4 × 2 | — |
| #2006 | Plate 2 × 4 | 94 | 14 | 109 | 4 × 2 | — |
04 Towers / STEP 203 OF 244
Tower 2 · layer 110
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 4 pieces with their bottoms 110 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #2007 | Brick 2 × 2 | 95 | 0 | 110 | 2 × 2 | — |
| #2008 | Brick 2 × 2 | 95 | 2 | 110 | 2 × 2 | — |
| #2009 | Brick 2 × 2 | 95 | 12 | 110 | 2 × 2 | — |
| #2010 | Brick 2 × 2 | 95 | 14 | 110 | 2 × 2 | — |
04 Towers / STEP 204 OF 244
Tower 2 · layer 113
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 4 pieces with their bottoms 113 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #2011 | Brick 2 × 2 | 95 | 0 | 113 | 2 × 2 | — |
| #2012 | Brick 2 × 2 | 95 | 2 | 113 | 2 × 2 | — |
| #2013 | Brick 2 × 2 | 95 | 12 | 113 | 2 × 2 | — |
| #2014 | Brick 2 × 2 | 95 | 14 | 113 | 2 × 2 | — |
04 Towers / STEP 205 OF 244
Tower 2 · layer 116
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 4 pieces with their bottoms 116 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #2015 | Brick 2 × 2 | 95 | 0 | 116 | 2 × 2 | — |
| #2016 | Brick 2 × 2 | 95 | 2 | 116 | 2 × 2 | — |
| #2017 | Brick 2 × 2 | 95 | 12 | 116 | 2 × 2 | — |
| #2018 | Brick 2 × 2 | 95 | 14 | 116 | 2 × 2 | — |
04 Towers / STEP 206 OF 244
Tower 2 · layer 119
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 4 pieces with their bottoms 119 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #2019 | Brick 2 × 2 | 95 | 0 | 119 | 2 × 2 | — |
| #2020 | Brick 2 × 2 | 95 | 2 | 119 | 2 × 2 | — |
| #2021 | Brick 2 × 2 | 95 | 12 | 119 | 2 × 2 | — |
| #2022 | Brick 2 × 2 | 95 | 14 | 119 | 2 × 2 | — |
04 Towers / STEP 207 OF 244
Tower 2 · layer 122
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 4 pieces with their bottoms 122 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #2023 | Brick 2 × 2 | 95 | 0 | 122 | 2 × 2 | — |
| #2024 | Brick 2 × 2 | 95 | 2 | 122 | 2 × 2 | — |
| #2025 | Brick 2 × 2 | 95 | 12 | 122 | 2 × 2 | — |
| #2026 | Brick 2 × 2 | 95 | 14 | 122 | 2 × 2 | — |
04 Towers / STEP 208 OF 244
Tower 2 · layer 125
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 4 pieces with their bottoms 125 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #2027 | Brick 2 × 2 | 95 | 0 | 125 | 2 × 2 | — |
| #2028 | Brick 2 × 2 | 95 | 2 | 125 | 2 × 2 | — |
| #2029 | Brick 2 × 2 | 95 | 12 | 125 | 2 × 2 | — |
| #2030 | Brick 2 × 2 | 95 | 14 | 125 | 2 × 2 | — |
04 Towers / STEP 209 OF 244
Tower 2 · layer 128
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 4 pieces with their bottoms 128 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Brick 2 × 2
Bright red · element 300321
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #2031 | Brick 2 × 2 | 95 | 0 | 128 | 2 × 2 | — |
| #2032 | Brick 2 × 2 | 95 | 2 | 128 | 2 × 2 | — |
| #2033 | Brick 2 × 2 | 95 | 12 | 128 | 2 × 2 | — |
| #2034 | Brick 2 × 2 | 95 | 14 | 128 | 2 × 2 | — |
04 Towers / STEP 210 OF 244
Tower 2 · layer 131
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 4 pieces with their bottoms 131 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Plate 2 × 8
Bright red · element 303421
Bright red · element 303421
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #2035 | Plate 2 × 8 | 94 | 0 | 131 | 2 × 8 | — |
| #2036 | Plate 2 × 8 | 94 | 8 | 131 | 2 × 8 | — |
| #2037 | Plate 2 × 8 | 96 | 0 | 131 | 2 × 8 | — |
| #2038 | Plate 2 × 8 | 96 | 8 | 131 | 2 × 8 | — |
04 Towers / STEP 211 OF 244
Tower 2 · layer 132
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 6 pieces with their bottoms 132 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
4 × Plate 2 × 4
Bright red · element 3020212 × Plate 2 × 8
Bright red · element 303421
Bright red · element 3020212 × Plate 2 × 8
Bright red · element 303421
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #2039 | Plate 2 × 4 | 94 | 0 | 132 | 2 × 4 | — |
| #2040 | Plate 2 × 8 | 94 | 4 | 132 | 2 × 8 | — |
| #2041 | Plate 2 × 4 | 94 | 12 | 132 | 2 × 4 | — |
| #2042 | Plate 2 × 4 | 96 | 0 | 132 | 2 × 4 | — |
| #2043 | Plate 2 × 8 | 96 | 4 | 132 | 2 × 8 | — |
| #2044 | Plate 2 × 4 | 96 | 12 | 132 | 2 × 4 | — |
04 Towers / STEP 212 OF 244
Tower 2 · layer 133
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 8 pieces with their bottoms 133 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
8 × Plate 2 × 4
Bright red · element 302021
Bright red · element 302021
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #2045 | Plate 2 × 4 | 94 | 0 | 133 | 4 × 2 | — |
| #2046 | Plate 2 × 4 | 94 | 2 | 133 | 4 × 2 | — |
| #2047 | Plate 2 × 4 | 94 | 4 | 133 | 4 × 2 | — |
| #2048 | Plate 2 × 4 | 94 | 6 | 133 | 4 × 2 | — |
| #2049 | Plate 2 × 4 | 94 | 8 | 133 | 4 × 2 | — |
| #2050 | Plate 2 × 4 | 94 | 10 | 133 | 4 × 2 | — |
| #2051 | Plate 2 × 4 | 94 | 12 | 133 | 4 × 2 | — |
| #2052 | Plate 2 × 4 | 94 | 14 | 133 | 4 × 2 | — |
04 Towers / STEP 213 OF 244
Tower 2 · layer 134
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 4 pieces with their bottoms 134 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
- Handle bars face outward: near side at z = 0, far side at z = 15. Keep the exposed bars clear for the strings.
2 × Plate 2 × 4
Bright red · element 3020212 × Plate 1 × 2 with handle
Bright red · element 4140585
Bright red · element 3020212 × Plate 1 × 2 with handle
Bright red · element 4140585
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #2053 | Plate 1 × 2 with handle | 95 | 0 | 134 | 2 × 1 | Near side |
| #2056 | Plate 1 × 2 with handle | 95 | 15 | 134 | 2 × 1 | Far side |
| #2059 | Plate 2 × 4 | 94 | 1 | 134 | 4 × 2 | — |
| #2062 | Plate 2 × 4 | 94 | 13 | 134 | 4 × 2 | — |
04 Towers / STEP 214 OF 244
Tower 2 · layer 135
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 4 pieces with their bottoms 135 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
2 × Plate 1 × 4
Bright red · element 3710212 × Brick 2 × 2
Bright red · element 300321
Bright red · element 3710212 × Brick 2 × 2
Bright red · element 300321
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #2054 | Plate 1 × 4 | 94 | 0 | 135 | 4 × 1 | — |
| #2057 | Plate 1 × 4 | 94 | 15 | 135 | 4 × 1 | — |
| #2060 | Brick 2 × 2 | 95 | 1 | 135 | 2 × 2 | — |
| #2063 | Brick 2 × 2 | 95 | 13 | 135 | 2 × 2 | — |
04 Towers / STEP 215 OF 244
Tower 2 · layer 136
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 2 pieces with their bottoms 136 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
2 × Plate 1 × 4
Bright red · element 371021
Bright red · element 371021
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #2055 | Plate 1 × 4 | 94 | 0 | 136 | 4 × 1 | — |
| #2058 | Plate 1 × 4 | 94 | 15 | 136 | 4 × 1 | — |
04 Towers / STEP 216 OF 244
Tower 2 · layer 138
- Raise both legs together, then bridge them with the crossbeam layers shown. Support the deck underneath while pressing down; the upper legs narrow above the lower section.
- Place these 2 pieces with their bottoms 138 plate units above the base. Match the footprints and coordinates below; press onto the layer underneath.
2 × Plate 2 × 4
Bright red · element 302021
Bright red · element 302021
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
| Piece | Part | x | z | y | Footprint | Handle |
|---|---|---|---|---|---|---|
| #2061 | Plate 2 × 4 | 94 | 1 | 138 | 4 × 2 | — |
| #2064 | Plate 2 × 4 | 94 | 13 | 138 | 4 × 2 | — |
05 Chains / STEP 217 OF 244
Near side · left chain run
- Lay out 3 whole 16M chains for this run. Endpoints are at x = 2 and x = 32 on the near side.
- Prototype the end joins and tower mounting before attaching this run. The paired round ends in the model indicate proposed connections, not a verified joining technique. Do not force fittings; confirm suitable connector parts before proceeding.
- Once the connections fit, drape the run to match the curve. Keep the deck supported. Confirm all six runs before cutting any hanger strings.
3 × Chain 16M · 21 links
Dark stone grey · element 6258887
Dark stone grey · element 6258887
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
Back to chapters ↑05 Chains / STEP 218 OF 244
Near side · main chain run
- Lay out 5 whole 16M chains for this run. Endpoints are at x = 32 and x = 96 on the near side.
- Prototype the end joins and tower mounting before attaching this run. The paired round ends in the model indicate proposed connections, not a verified joining technique. Do not force fittings; confirm suitable connector parts before proceeding.
- Once the connections fit, drape the run to match the curve. Keep the deck supported. Confirm all six runs before cutting any hanger strings.
5 × Chain 16M · 21 links
Dark stone grey · element 6258887
Dark stone grey · element 6258887
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
Back to chapters ↑05 Chains / STEP 219 OF 244
Near side · right chain run
- Lay out 3 whole 16M chains for this run. Endpoints are at x = 96 and x = 126 on the near side.
- Prototype the end joins and tower mounting before attaching this run. The paired round ends in the model indicate proposed connections, not a verified joining technique. Do not force fittings; confirm suitable connector parts before proceeding.
- Once the connections fit, drape the run to match the curve. Keep the deck supported. Confirm all six runs before cutting any hanger strings.
3 × Chain 16M · 21 links
Dark stone grey · element 6258887
Dark stone grey · element 6258887
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
Back to chapters ↑05 Chains / STEP 220 OF 244
Far side · left chain run
- Lay out 3 whole 16M chains for this run. Endpoints are at x = 2 and x = 32 on the far side.
- Prototype the end joins and tower mounting before attaching this run. The paired round ends in the model indicate proposed connections, not a verified joining technique. Do not force fittings; confirm suitable connector parts before proceeding.
- Once the connections fit, drape the run to match the curve. Keep the deck supported. Confirm all six runs before cutting any hanger strings.
3 × Chain 16M · 21 links
Dark stone grey · element 6258887
Dark stone grey · element 6258887
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
Back to chapters ↑05 Chains / STEP 221 OF 244
Far side · main chain run
- Lay out 5 whole 16M chains for this run. Endpoints are at x = 32 and x = 96 on the far side.
- Prototype the end joins and tower mounting before attaching this run. The paired round ends in the model indicate proposed connections, not a verified joining technique. Do not force fittings; confirm suitable connector parts before proceeding.
- Once the connections fit, drape the run to match the curve. Keep the deck supported. Confirm all six runs before cutting any hanger strings.
5 × Chain 16M · 21 links
Dark stone grey · element 6258887
Dark stone grey · element 6258887
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
Back to chapters ↑05 Chains / STEP 222 OF 244
Far side · right chain run
- Lay out 3 whole 16M chains for this run. Endpoints are at x = 96 and x = 126 on the far side.
- Prototype the end joins and tower mounting before attaching this run. The paired round ends in the model indicate proposed connections, not a verified joining technique. Do not force fittings; confirm suitable connector parts before proceeding.
- Once the connections fit, drape the run to match the curve. Keep the deck supported. Confirm all six runs before cutting any hanger strings.
3 × Chain 16M · 21 links
Dark stone grey · element 6258887
Dark stone grey · element 6258887
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
Back to chapters ↑06 Hangers / STEP 223 OF 244
String 1 of 21
- Use one 500 mm string. First test a hanger against the physically fitted chains; the proposed cuts include at least 60 mm total for knots. If fit requires more length, revise the cut plan before cutting the remaining stock.
- Label each cut with its attachment ID. Tie its bottom around the outward-facing deck handle and its top through the chain link directly above. Use just enough tension to remove slack; keep both sides balanced.
- Follow the cuts below and retain the 0 mm remainder. Near/Far identifies the side; the number is the x position in studs from the left end.
1 × String 500 mm · Ø 0.5 mm
Black · element 6530026
Black · element 6530026
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
String stock #1 · 500 mm
| Attachment ID | Cut length |
|---|---|
| Near-38 | 290 mm |
| Near-50 | 210 mm |
Remainder 0 mm. Cut lengths include knot allowance.
Back to chapters ↑06 Hangers / STEP 224 OF 244
String 2 of 21
- Use one 500 mm string. First test a hanger against the physically fitted chains; the proposed cuts include at least 60 mm total for knots. If fit requires more length, revise the cut plan before cutting the remaining stock.
- Label each cut with its attachment ID. Tie its bottom around the outward-facing deck handle and its top through the chain link directly above. Use just enough tension to remove slack; keep both sides balanced.
- Follow the cuts below and retain the 0 mm remainder. Near/Far identifies the side; the number is the x position in studs from the left end.
1 × String 500 mm · Ø 0.5 mm
Black · element 6530026
Black · element 6530026
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
String stock #2 · 500 mm
| Attachment ID | Cut length |
|---|---|
| Near-90 | 290 mm |
| Near-78 | 210 mm |
Remainder 0 mm. Cut lengths include knot allowance.
Back to chapters ↑06 Hangers / STEP 225 OF 244
String 3 of 21
- Use one 500 mm string. First test a hanger against the physically fitted chains; the proposed cuts include at least 60 mm total for knots. If fit requires more length, revise the cut plan before cutting the remaining stock.
- Label each cut with its attachment ID. Tie its bottom around the outward-facing deck handle and its top through the chain link directly above. Use just enough tension to remove slack; keep both sides balanced.
- Follow the cuts below and retain the 0 mm remainder. Near/Far identifies the side; the number is the x position in studs from the left end.
1 × String 500 mm · Ø 0.5 mm
Black · element 6530026
Black · element 6530026
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
String stock #3 · 500 mm
| Attachment ID | Cut length |
|---|---|
| Far-38 | 290 mm |
| Far-50 | 210 mm |
Remainder 0 mm. Cut lengths include knot allowance.
Back to chapters ↑06 Hangers / STEP 226 OF 244
String 4 of 21
- Use one 500 mm string. First test a hanger against the physically fitted chains; the proposed cuts include at least 60 mm total for knots. If fit requires more length, revise the cut plan before cutting the remaining stock.
- Label each cut with its attachment ID. Tie its bottom around the outward-facing deck handle and its top through the chain link directly above. Use just enough tension to remove slack; keep both sides balanced.
- Follow the cuts below and retain the 0 mm remainder. Near/Far identifies the side; the number is the x position in studs from the left end.
1 × String 500 mm · Ø 0.5 mm
Black · element 6530026
Black · element 6530026
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
String stock #4 · 500 mm
| Attachment ID | Cut length |
|---|---|
| Far-90 | 290 mm |
| Far-78 | 210 mm |
Remainder 0 mm. Cut lengths include knot allowance.
Back to chapters ↑06 Hangers / STEP 227 OF 244
String 5 of 21
- Use one 500 mm string. First test a hanger against the physically fitted chains; the proposed cuts include at least 60 mm total for knots. If fit requires more length, revise the cut plan before cutting the remaining stock.
- Label each cut with its attachment ID. Tie its bottom around the outward-facing deck handle and its top through the chain link directly above. Use just enough tension to remove slack; keep both sides balanced.
- Follow the cuts below and retain the 5 mm remainder. Near/Far identifies the side; the number is the x position in studs from the left end.
1 × String 500 mm · Ø 0.5 mm
Black · element 6530026
Black · element 6530026
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
String stock #5 · 500 mm
| Attachment ID | Cut length |
|---|---|
| Near-26 | 260 mm |
| Near-46 | 235 mm |
Remainder 5 mm. Cut lengths include knot allowance.
Back to chapters ↑06 Hangers / STEP 228 OF 244
String 6 of 21
- Use one 500 mm string. First test a hanger against the physically fitted chains; the proposed cuts include at least 60 mm total for knots. If fit requires more length, revise the cut plan before cutting the remaining stock.
- Label each cut with its attachment ID. Tie its bottom around the outward-facing deck handle and its top through the chain link directly above. Use just enough tension to remove slack; keep both sides balanced.
- Follow the cuts below and retain the 5 mm remainder. Near/Far identifies the side; the number is the x position in studs from the left end.
1 × String 500 mm · Ø 0.5 mm
Black · element 6530026
Black · element 6530026
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
String stock #6 · 500 mm
| Attachment ID | Cut length |
|---|---|
| Near-42 | 260 mm |
| Near-82 | 235 mm |
Remainder 5 mm. Cut lengths include knot allowance.
Back to chapters ↑06 Hangers / STEP 229 OF 244
String 7 of 21
- Use one 500 mm string. First test a hanger against the physically fitted chains; the proposed cuts include at least 60 mm total for knots. If fit requires more length, revise the cut plan before cutting the remaining stock.
- Label each cut with its attachment ID. Tie its bottom around the outward-facing deck handle and its top through the chain link directly above. Use just enough tension to remove slack; keep both sides balanced.
- Follow the cuts below and retain the 5 mm remainder. Near/Far identifies the side; the number is the x position in studs from the left end.
1 × String 500 mm · Ø 0.5 mm
Black · element 6530026
Black · element 6530026
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
String stock #7 · 500 mm
| Attachment ID | Cut length |
|---|---|
| Near-86 | 260 mm |
| Far-46 | 235 mm |
Remainder 5 mm. Cut lengths include knot allowance.
Back to chapters ↑06 Hangers / STEP 230 OF 244
String 8 of 21
- Use one 500 mm string. First test a hanger against the physically fitted chains; the proposed cuts include at least 60 mm total for knots. If fit requires more length, revise the cut plan before cutting the remaining stock.
- Label each cut with its attachment ID. Tie its bottom around the outward-facing deck handle and its top through the chain link directly above. Use just enough tension to remove slack; keep both sides balanced.
- Follow the cuts below and retain the 5 mm remainder. Near/Far identifies the side; the number is the x position in studs from the left end.
1 × String 500 mm · Ø 0.5 mm
Black · element 6530026
Black · element 6530026
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
String stock #8 · 500 mm
| Attachment ID | Cut length |
|---|---|
| Near-102 | 260 mm |
| Far-82 | 235 mm |
Remainder 5 mm. Cut lengths include knot allowance.
Back to chapters ↑06 Hangers / STEP 231 OF 244
String 9 of 21
- Use one 500 mm string. First test a hanger against the physically fitted chains; the proposed cuts include at least 60 mm total for knots. If fit requires more length, revise the cut plan before cutting the remaining stock.
- Label each cut with its attachment ID. Tie its bottom around the outward-facing deck handle and its top through the chain link directly above. Use just enough tension to remove slack; keep both sides balanced.
- Follow the cuts below and retain the 35 mm remainder. Near/Far identifies the side; the number is the x position in studs from the left end.
1 × String 500 mm · Ø 0.5 mm
Black · element 6530026
Black · element 6530026
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
String stock #9 · 500 mm
| Attachment ID | Cut length |
|---|---|
| Far-26 | 260 mm |
| Near-22 | 205 mm |
Remainder 35 mm. Cut lengths include knot allowance.
Back to chapters ↑06 Hangers / STEP 232 OF 244
String 10 of 21
- Use one 500 mm string. First test a hanger against the physically fitted chains; the proposed cuts include at least 60 mm total for knots. If fit requires more length, revise the cut plan before cutting the remaining stock.
- Label each cut with its attachment ID. Tie its bottom around the outward-facing deck handle and its top through the chain link directly above. Use just enough tension to remove slack; keep both sides balanced.
- Follow the cuts below and retain the 35 mm remainder. Near/Far identifies the side; the number is the x position in studs from the left end.
1 × String 500 mm · Ø 0.5 mm
Black · element 6530026
Black · element 6530026
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
String stock #10 · 500 mm
| Attachment ID | Cut length |
|---|---|
| Far-42 | 260 mm |
| Near-106 | 205 mm |
Remainder 35 mm. Cut lengths include knot allowance.
Back to chapters ↑06 Hangers / STEP 233 OF 244
String 11 of 21
- Use one 500 mm string. First test a hanger against the physically fitted chains; the proposed cuts include at least 60 mm total for knots. If fit requires more length, revise the cut plan before cutting the remaining stock.
- Label each cut with its attachment ID. Tie its bottom around the outward-facing deck handle and its top through the chain link directly above. Use just enough tension to remove slack; keep both sides balanced.
- Follow the cuts below and retain the 35 mm remainder. Near/Far identifies the side; the number is the x position in studs from the left end.
1 × String 500 mm · Ø 0.5 mm
Black · element 6530026
Black · element 6530026
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
String stock #11 · 500 mm
| Attachment ID | Cut length |
|---|---|
| Far-86 | 260 mm |
| Far-22 | 205 mm |
Remainder 35 mm. Cut lengths include knot allowance.
Back to chapters ↑06 Hangers / STEP 234 OF 244
String 12 of 21
- Use one 500 mm string. First test a hanger against the physically fitted chains; the proposed cuts include at least 60 mm total for knots. If fit requires more length, revise the cut plan before cutting the remaining stock.
- Label each cut with its attachment ID. Tie its bottom around the outward-facing deck handle and its top through the chain link directly above. Use just enough tension to remove slack; keep both sides balanced.
- Follow the cuts below and retain the 35 mm remainder. Near/Far identifies the side; the number is the x position in studs from the left end.
1 × String 500 mm · Ø 0.5 mm
Black · element 6530026
Black · element 6530026
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
String stock #12 · 500 mm
| Attachment ID | Cut length |
|---|---|
| Far-102 | 260 mm |
| Far-106 | 205 mm |
Remainder 35 mm. Cut lengths include knot allowance.
Back to chapters ↑06 Hangers / STEP 235 OF 244
String 13 of 21
- Use one 500 mm string. First test a hanger against the physically fitted chains; the proposed cuts include at least 60 mm total for knots. If fit requires more length, revise the cut plan before cutting the remaining stock.
- Label each cut with its attachment ID. Tie its bottom around the outward-facing deck handle and its top through the chain link directly above. Use just enough tension to remove slack; keep both sides balanced.
- Follow the cuts below and retain the 15 mm remainder. Near/Far identifies the side; the number is the x position in studs from the left end.
1 × String 500 mm · Ø 0.5 mm
Black · element 6530026
Black · element 6530026
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
String stock #13 · 500 mm
| Attachment ID | Cut length |
|---|---|
| Near-54 | 195 mm |
| Near-74 | 195 mm |
| Near-10 | 95 mm |
Remainder 15 mm. Cut lengths include knot allowance.
Back to chapters ↑06 Hangers / STEP 236 OF 244
String 14 of 21
- Use one 500 mm string. First test a hanger against the physically fitted chains; the proposed cuts include at least 60 mm total for knots. If fit requires more length, revise the cut plan before cutting the remaining stock.
- Label each cut with its attachment ID. Tie its bottom around the outward-facing deck handle and its top through the chain link directly above. Use just enough tension to remove slack; keep both sides balanced.
- Follow the cuts below and retain the 15 mm remainder. Near/Far identifies the side; the number is the x position in studs from the left end.
1 × String 500 mm · Ø 0.5 mm
Black · element 6530026
Black · element 6530026
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
String stock #14 · 500 mm
| Attachment ID | Cut length |
|---|---|
| Far-54 | 195 mm |
| Far-74 | 195 mm |
| Near-118 | 95 mm |
Remainder 15 mm. Cut lengths include knot allowance.
Back to chapters ↑06 Hangers / STEP 237 OF 244
String 15 of 21
- Use one 500 mm string. First test a hanger against the physically fitted chains; the proposed cuts include at least 60 mm total for knots. If fit requires more length, revise the cut plan before cutting the remaining stock.
- Label each cut with its attachment ID. Tie its bottom around the outward-facing deck handle and its top through the chain link directly above. Use just enough tension to remove slack; keep both sides balanced.
- Follow the cuts below and retain the 5 mm remainder. Near/Far identifies the side; the number is the x position in studs from the left end.
1 × String 500 mm · Ø 0.5 mm
Black · element 6530026
Black · element 6530026
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
String stock #15 · 500 mm
| Attachment ID | Cut length |
|---|---|
| Near-58 | 185 mm |
| Near-70 | 185 mm |
| Near-14 | 125 mm |
Remainder 5 mm. Cut lengths include knot allowance.
Back to chapters ↑06 Hangers / STEP 238 OF 244
String 16 of 21
- Use one 500 mm string. First test a hanger against the physically fitted chains; the proposed cuts include at least 60 mm total for knots. If fit requires more length, revise the cut plan before cutting the remaining stock.
- Label each cut with its attachment ID. Tie its bottom around the outward-facing deck handle and its top through the chain link directly above. Use just enough tension to remove slack; keep both sides balanced.
- Follow the cuts below and retain the 5 mm remainder. Near/Far identifies the side; the number is the x position in studs from the left end.
1 × String 500 mm · Ø 0.5 mm
Black · element 6530026
Black · element 6530026
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
String stock #16 · 500 mm
| Attachment ID | Cut length |
|---|---|
| Far-58 | 185 mm |
| Far-70 | 185 mm |
| Near-114 | 125 mm |
Remainder 5 mm. Cut lengths include knot allowance.
Back to chapters ↑06 Hangers / STEP 239 OF 244
String 17 of 21
- Use one 500 mm string. First test a hanger against the physically fitted chains; the proposed cuts include at least 60 mm total for knots. If fit requires more length, revise the cut plan before cutting the remaining stock.
- Label each cut with its attachment ID. Tie its bottom around the outward-facing deck handle and its top through the chain link directly above. Use just enough tension to remove slack; keep both sides balanced.
- Follow the cuts below and retain the 15 mm remainder. Near/Far identifies the side; the number is the x position in studs from the left end.
1 × String 500 mm · Ø 0.5 mm
Black · element 6530026
Black · element 6530026
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
String stock #17 · 500 mm
| Attachment ID | Cut length |
|---|---|
| Near-62 | 180 mm |
| Near-66 | 180 mm |
| Far-14 | 125 mm |
Remainder 15 mm. Cut lengths include knot allowance.
Back to chapters ↑06 Hangers / STEP 240 OF 244
String 18 of 21
- Use one 500 mm string. First test a hanger against the physically fitted chains; the proposed cuts include at least 60 mm total for knots. If fit requires more length, revise the cut plan before cutting the remaining stock.
- Label each cut with its attachment ID. Tie its bottom around the outward-facing deck handle and its top through the chain link directly above. Use just enough tension to remove slack; keep both sides balanced.
- Follow the cuts below and retain the 15 mm remainder. Near/Far identifies the side; the number is the x position in studs from the left end.
1 × String 500 mm · Ø 0.5 mm
Black · element 6530026
Black · element 6530026
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
String stock #18 · 500 mm
| Attachment ID | Cut length |
|---|---|
| Far-62 | 180 mm |
| Far-66 | 180 mm |
| Far-114 | 125 mm |
Remainder 15 mm. Cut lengths include knot allowance.
Back to chapters ↑06 Hangers / STEP 241 OF 244
String 19 of 21
- Use one 500 mm string. First test a hanger against the physically fitted chains; the proposed cuts include at least 60 mm total for knots. If fit requires more length, revise the cut plan before cutting the remaining stock.
- Label each cut with its attachment ID. Tie its bottom around the outward-facing deck handle and its top through the chain link directly above. Use just enough tension to remove slack; keep both sides balanced.
- Follow the cuts below and retain the 5 mm remainder. Near/Far identifies the side; the number is the x position in studs from the left end.
1 × String 500 mm · Ø 0.5 mm
Black · element 6530026
Black · element 6530026
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
String stock #19 · 500 mm
| Attachment ID | Cut length |
|---|---|
| Near-18 | 165 mm |
| Near-110 | 165 mm |
| Far-18 | 165 mm |
Remainder 5 mm. Cut lengths include knot allowance.
Back to chapters ↑06 Hangers / STEP 242 OF 244
String 20 of 21
- Use one 500 mm string. First test a hanger against the physically fitted chains; the proposed cuts include at least 60 mm total for knots. If fit requires more length, revise the cut plan before cutting the remaining stock.
- Label each cut with its attachment ID. Tie its bottom around the outward-facing deck handle and its top through the chain link directly above. Use just enough tension to remove slack; keep both sides balanced.
- Follow the cuts below and retain the 70 mm remainder. Near/Far identifies the side; the number is the x position in studs from the left end.
1 × String 500 mm · Ø 0.5 mm
Black · element 6530026
Black · element 6530026
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
String stock #20 · 500 mm
| Attachment ID | Cut length |
|---|---|
| Far-110 | 165 mm |
| Far-10 | 95 mm |
| Far-118 | 95 mm |
| Near-6 | 75 mm |
Remainder 70 mm. Cut lengths include knot allowance.
Back to chapters ↑06 Hangers / STEP 243 OF 244
String 21 of 21
- Use one 500 mm string. First test a hanger against the physically fitted chains; the proposed cuts include at least 60 mm total for knots. If fit requires more length, revise the cut plan before cutting the remaining stock.
- Label each cut with its attachment ID. Tie its bottom around the outward-facing deck handle and its top through the chain link directly above. Use just enough tension to remove slack; keep both sides balanced.
- Follow the cuts below and retain the 275 mm remainder. Near/Far identifies the side; the number is the x position in studs from the left end.
1 × String 500 mm · Ø 0.5 mm
Black · element 6530026
Black · element 6530026
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
String stock #21 · 500 mm
| Attachment ID | Cut length |
|---|---|
| Near-122 | 75 mm |
| Far-6 | 75 mm |
| Far-122 | 75 mm |
Remainder 275 mm. Cut lengths include knot allowance.
Back to chapters ↑07 Finish / STEP 244 OF 244
Inspect the completed bridge
- Check that all brick layers are seated, towers stand upright and the deck stays level on its four supports.
- Check every chain connection and hanger knot. Adjust tension evenly without pulling the deck upward. Keep unused string offcuts for repairs.
- The full inventory is now allocated: 2,064 rigid pieces, 22 complete chains and 21 stock strings. Carry the metre-long model on its rigid board.
Teal: add in this step. Grey: earlier pieces. Flexible paths are schematic; inspect individual chain links in the interactive guide.
Back to chapters ↑